ページ1に含まれる内容の要旨
DVD Premium Pro Series
NET Users Manual
www.microboards.com Version 2.01 NET
ページ2に含まれる内容の要旨
DVD Premium Pro Series MICROBOARDS TECHNOLOGY, LLC 2
ページ3に含まれる内容の要旨
DVD Premium Pro Series MICROBOARDS TECHNOLOGY, LLC TABLE OF CONTENTS System Overview..................................................................................................5 Unpacking your system.........................................................................................5 Microboards Statement Regarding Improper Duplication .....................................5 Installation Requirements .............................
ページ4に含まれる内容の要旨
DVD Premium Pro Series MICROBOARDS TECHNOLOGY, LLC 4
ページ5に含まれる内容の要旨
DVD Premium Pro Series MICROBOARDS TECHNOLOGY, LLC System Overview The DVD Premium Pro NET Series employs 10 General Purpose DVD-+R/DL recorders in each tower, with the ability to have all connected drives duplicating from a single master. The hard drive comes standard with each tower and allows for DVD/CD image archival and CD track extraction for CD audio compilations. An intuitive, menu driven display and 5-button control COPY START in
ページ6に含まれる内容の要旨
DVD Premium Pro Series MICROBOARDS TECHNOLOGY, LLC Installation Requirements System Setup • Connect the power cable to the DVD Premium Pro Series tower and plug in to a protected power outlet strip or UPS power supply. • Connect the 2 towers using the NET cable provided (see page 7 for more information). o The left port on the back is the IN port, and the right is the OUT port; the Master tower should have the NET cable plugged into
ページ7に含まれる内容の要旨
DVD Premium Pro Series MICROBOARDS TECHNOLOGY, LLC Connecting Master and Slave Towers The Microboards DVD Premium Pro NET tower line requires a physical connection between the towers. A tower will be designated as a Master or as a Slave tower initially based solely on the configuration of the connection. The directions below give 2 connection scenarios: a 2-tower configuration, and a Multi-Tower configuration. Please use the appropriate instr
ページ8に含まれる内容の要旨
DVD Premium Pro Series MICROBOARDS TECHNOLOGY, LLC Microboards NET Configuration The Microboards NET configuration allows you to connect multiple 10-drive tower duplicators. They can function together as a single duplicator with 10 drives per tower for ultra high-quantity production, or can operate independently as stand-alone duplicators, each copying from a different master. It does not matter which tower is set as the Master; the only restr
ページ9に含まれる内容の要旨
DVD Premium Pro Series MICROBOARDS TECHNOLOGY, LLC Advanced Configuration If, however, you wish to operate them as two 3-tower Master/Slave groups, simply press the YES button on the tower on which the Configuration Options display reads NET SLAVE 3. This will cause all towers following this tower to be slaved to that tower. The YES button on the first tower must also be pressed to slave towers 2 and 3 to the first tower. The reader and hard
ページ10に含まれる内容の要旨
DVD Premium Pro Series MICROBOARDS TECHNOLOGY, LLC Main Menu The Arrow buttons (▼▲)allow you to move forward or backward in the menu without selecting the current menu item. The NO button will move you to the next menu item. YES will select the current menu item. YES INSERT INSERT ANALYZING MASTER COPY 15:26 COPY START? (DISCtoDISC) MASTER DISC TARGET DISC CD-DA 20% NO, ▼ YES MASTER SELECT? >READER?
ページ11に含まれる内容の要旨
DVD Premium Pro Series MICROBOARDS TECHNOLOGY, LLC Copy Disc to Disc 1. Place the Master Disc into the Reader drive. Place the blank disc(s) into the Recorder drive(s) and wait 10 seconds for the light(s) on the front of the Recorder(s) to stop blinking. Note that the blanks must be of the same media type as the master; you cannot copy a CD master to DVD’s, for instance. 2. The display reads COPY START? (DISC to DISC). Copy Start? (DISC
ページ12に含まれる内容の要旨
DVD Premium Pro Series MICROBOARDS TECHNOLOGY, LLC 11. Once the Master disc has been copied to the HDD, the Reader drive will eject the disc. When you go back into the MASTER SELECT? Menu, and select a partition with data stored on it, the display will show the type of data (ROM or Video) and the capacity of that data. Proceed to COPY HDD TO DVD section. Copy Hard Drive (HDD) to Disc 1. Follow the instructions on page 10 to register the Ma
ページ13に含まれる内容の要旨
DVD Premium Pro Series MICROBOARDS TECHNOLOGY, LLC 7. Press the YES button if you are sure you want to clear the HDD. 8. The hard drive will now be cleared and you will be asked if you want to register another master to the HDD. >HDD1? (DISC to HDD) 9. Press YES and the Reader drive will eject and you can insert another master to register to the HDD. REGISTER 4.0GB DVD 25% 10. Press NO and
ページ14に含まれる内容の要旨
DVD Premium Pro Series MICROBOARDS TECHNOLOGY, LLC Pressing the YES button at either of these selections will show the following screen: SURE? Press the YES button if you are sure you want to erase the DVD-+RW disc. If you do not wish to erase the disc, press the NO button and you will go back to the DISC ERASE screen (step 1). 5. The screen will now show: DISC ERASE 6. Once the erasing is complete, the Recorder(s) will eject the disc(s).
ページ15に含まれる内容の要旨
DVD Premium Pro Series MICROBOARDS TECHNOLOGY, LLC 7. After registration completes, the DVD Premium Pro Series asks you if you want to extract more tracks from other master audio discs. NEXT MASTER Press YES to extract more tracks from other master audio discs. Press NO to complete extraction. 8. If you press NO, the DVD Premium Pro Series moves back to COPY menu so that you can copy the extracted tracks in HDD to blank CD-R media. COPY S
ページ16に含まれる内容の要旨
DVD Premium Pro Series MICROBOARDS TECHNOLOGY, LLC Setup Menu Yes Yes SETUP MODE SELECT? COPY? VERIFY? COPY + V? EXIT? COPY? (COPY MODE) (DISC to DISC) (DISC to DISC) (DISC to DISC) Yes DVD WR MAX? 12X? 1X? EXIT? MAX? SPEED? (MAX) Yes CD WR SPEED? MAX? 40X? 4X? EXIT? MAX? (MAX) ISRC CHECK? Yes ISRC ON? ISRC OFF? EXIT? ISRC ON? (OFF) Auto Run? Yes ON? OFF? (OFF) COPY QUANTITY? Yes COPY QUANTITY? (xxxx/xxxx)
ページ17に含まれる内容の要旨
DVD Premium Pro Series MICROBOARDS TECHNOLOGY, LLC Setup Menu 1. At the COPY START? (DISC to DISC) menu, press SETUP? the NO or ▼ button until the display shows SETUP? (MODE CHANGE) (MODE CHANGE) 2. Press the YES button 3. The first setup option is Mode Select, followed by Copy DISC to HD/DISC, Write Speed, ISRC Check, Copy Quantity, Session Mode, Drive Inquiry, Firmware Version and Exit. 4. Pressing the NO or ▼ button will allow you to m
ページ18に含まれる内容の要旨
DVD Premium Pro Series MICROBOARDS TECHNOLOGY, LLC Error Codes Read Errors ASC ASCQ Description 00 00 NO ADDITIONAL SENSE INFORMATION 00 06 I/O PROCESS TERMINATED, PLAY OPERATION ABORTED 00 11 AUDIO PLAY OPERATION IN PROGRESS 00 12 AUDIO PLAY OPERATION PAUSE 00 13 AUDIO PLAY OPERATION SUCCESSFULLY COMPLETED 00 14 AUDIO PLAY OPERATION STOPPED DUE TO ERROR 00 15 NO CURRENT AUDIO STATUS TO RETURN 00 17 CLEANINF REQUESTED 01 00 NO INDEX/SECT
ページ19に含まれる内容の要旨
DVD Premium Pro Series MICROBOARDS TECHNOLOGY, LLC 2A 00 PARAMETERS CHANGED 2A 01 MODE PARAMETERS CHANGED 2A 02 LOG PARAMETERS CHANGED 2A 03 RESERVATIONS PREEMPTED 2B 00 COPY CANNOT EXECUSE SINCE HOST CANNOT DISCONNECT 2C 00 COMMAND SEQUENCE ERROR 2C 05 PERSISTENT PREVENT CONFLICT 2F 00 COMMANDS CLEARED BY ANOTHER INITIATOR 30 00 INCOMPATIBLE MEDIUM INSTALLED 30 01 CANNOT READ MEDIUM - UNKNOWN FORMAT 30 02 CANNOT READ MEDIUM – INCOMPATIBLE
ページ20に含まれる内容の要旨
DVD Premium Pro Series MICROBOARDS TECHNOLOGY, LLC 00 12 AUDIO PLAY OPERATION PAUSED 00 13 AUDIO PLAY OPERATION SUCCESSFULLY 00 14 AUDIO PLAY OPERATION STOPPED DUE TO ERRPOR 00 15 NO CURRENT AUDIO STATUS TO RETURN 02 00 NO SEEK COMPLETE 04 00 LOGICAL UNIT NOT READY, CAUSE NOT REPORTABLE 04 01 LOGICAL UNIT IS IN PROCESS OF BECOMING READY 04 02 LOGICAL UNIT NOT READY, INITIALIZING CMD. REQUIRED 04 03 LOGICAL UNIT NOT READY, MANUAL INTERVENTION
