ページ1に含まれる内容の要旨
Model CDR310 User Guide
CD Recorder
CLASS 1 LASER PRODUCT
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
ページ2に含まれる内容の要旨
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point w
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality 11. Only use attachments/accessories specified by the and safety standards. There are, however, some installation and manufacturer. operation precautions which you should be particularly aware of. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the c
ページ4に含まれる内容の要旨
CE marking (only EU version) English This product is in conformity with the EMC directive and low-voltage directive. Français Cet appareil est conforme á la directive EMC et á la de directive sur les basses tensions. Deutsch Dieses Gerät entspricht den EMC-Richtlinien und den Richtlinien für Niederspannungsgeräte. Nederlands Dit apparaat voldoet aan de EMC-richtlijnene en de richtlijnen voor apparatuur met laag voltage. Italiano Quest' unitá è conforme alle direttive EMC ed alla direttiva s
ページ5に含まれる内容の要旨
Table of Contents 3. AllMkErase (How to erase all EDL marks) Package contents ......................... 3 28 Introduction .................................. 4 4. Format (How to format a CF card) ...... 28 Features .................................................... 4 Virtual Track and Copy Segment 29 Preparation ................................... 6 Virtual Track .............................................. 29 Copy Segment ......................................... 29 Installing th
ページ6に含まれる内容の要旨
● Recording level and LR balance adjustment ( XX) ☞ Introduction Automatic recording level control (ALC) Manual control Thank you for purchasing this CDR310 CD Recorder. Before using the CD recorder, make sure that you read ● You can record and playback audio in stereo (2 channel) through this instruction manual carefully to fully understand or monaural (1 channel). the device’s functions and how to operate them. We hope that you will continue to enjoy using the recorder for a very
ページ7に含まれる内容の要旨
Package contents CDR310 AC power pack Power cord Battery holder (AA type) User Guide Customer Registration Document 3
ページ8に含まれる内容の要旨
Quick Start Guide Before using the CDR310, please read through the following section which explains the basic flow of operation. 1. Setup the power supply ( P.XX) ☞ Use either the provided AC adaptor or batteries. POWER You can use any one of the 3 types of batteries: OFF ON Alkaline, optional Nickel-Cadmium, or optional Nickel- Metal Hydride. Please make sure batteries are fully charged. 2. Connect an external microphone and turn the power ON. ( P.XX) ☞ Connect the external microphone
ページ9に含まれる内容の要旨
ADDITIONAL INFORMATION About Discs The glossy side shining like a rainbow is the front side of the disc, and the side on which the label is printed is the back. Playable discs Unlike conventional turntables for playing analog discs, the unit reads the information recorded on the disc from underneath without contacting it using a beam of laser light. Therefore, the performance of a compact disc will not CD-R degrade like conventional analog records. Handle discs carefully so as not to damag
ページ10に含まれる内容の要旨
Names and Functions Top side 1 2 3 4 5 6 7 8 9 10 q Power switch Track selection Slide this switch to switch the power on/off. You can select the track you wish to play back by rotating the JOG while playback is paused, stopped, or during w DISPLAY button playback. After selecting the track that you wish to play Press this button to switch the contents of the display. back, press the JOG or PLAY/PAUSE button to play back The displayed information is different when the recorder is the
ページ11に含まれる内容の要旨
!5 PLAY/PAUSE button 11 12 13 14 Press this button when the recorder is stopped to start playback. Press this button during playback to pause playback. Also, if this button is pressed when playback is paused, playback restarts. !6 STOP button Press this button during recording to stop the recording and save the recorded track (file). 20 15 Press this button during playback to stop playback. If you press the PLAY/PAUSE button after pressing the STOP button, the stopped track starts
ページ12に含まれる内容の要旨
Front side 1 2 3 4 6 5 z CD slot b Headphone (PHONES) jack Insert the stereo headphones plug here. x EJECT button n LEVEL volume Press this button to eject the CD that is inside the CD slot. Turn this knob to adjust the internal speaker volume or c KEYLOCK switch volume output from the headphone jack. Set this switch ON to set to the key-lock status. All of the operating buttons and switches are locked, except for the Notes LIGHT button. When recording with the internal micropho
ページ13に含まれる内容の要旨
Right side A B C D E F G A MIC IN jacks (L/R) (XLR balanced input) E LINE IN jacks (L/R) Insert an external microphone plug. Insert RCA audio cable plugs connected to an external For monaural recording, plug into either the L side or R audio device into these jacks to input the signals output side jack. from the external device into the recorder. B DC IN jack F LINE OUT jacks (L/R) Insert the provided AC adaptor plug. Insert RCA audio cable plugs connected to an external The power su
ページ14に含まれる内容の要旨
Display asdfghjkl ¡0 ¡1 ¡2 ¡3 ¡4 ¡5 ¡6 ¡7 a Upper character display section l M.TRACK icon Displays the remaining time, etc. Lights when “ManualTR” is set to ON in the preset menu. s TOTAL/TRACK/TIME/REC/REMAIN icon ¡0 A.TRACK icon The following types of details are displayed in the upper Lights when “Auto TRK” is set to ON in the preset menu. character display section. ¡ 1 S.SKIP icon Explanation of display Lit display Lights when “SilentSkip” is set to ON or TRK in the preset in
ページ15に含まれる内容の要旨
AA Using batteries Preparations Before Use If you wish to run the recorder on battery power, follow the procedure below to install batteries into the provided battery AC adaptor connection holder, and insert the holder into the recorder. When using the recorder with the provided AC adaptor, follow The following types of battery can be used. the procedure below to connect the AC adaptor. ● Alkaline batteries If you wish to use batteries, please refer to the [Using ● Optional Nickel-Cad
ページ16に含まれる内容の要旨
AA AA AA AA AA AA A AA AA Installing an optional Ni-Cd or Ni-MH battery 3 Insert the battery holder into the battery case of the recorder correctly as shown in the diagram below, while paying attention to the polarity displays (+: plus, and -: Optional battery minus) on the case. tab Battery holder tab ribbon ribbon Install the battery with tab as shown and over the ribbon for easy battery removal. When changing battery type, be sure you change the Battery 4 Re-attach the removed battery c
ページ17に含まれる内容の要旨
Battery type settings Basic Operations Set the battery type for the recorder to match the type of batteries you are using. Power on/off 1 Slide the power switch to the ON side to switch the < Default value > Alkaline power ON. 1 While the recorder is stopped, press the MENU/STORE Notes button. The factory-preset settings are set to record sound using the external microphone input. Refer to “Menu Settings” for details on the default settings of the various menus. ( ☞ P.XX) 2 Turn the J
ページ18に含まれる内容の要旨
Battery remaining indicator The recorder operates using commercially available AA size alkaline batteries, the optional Nickel-Cadmium battery, or the optional Nickel-Metal Hydride battery. During operation, the battery remaining indicator is as follows. Remaining Display explanation indicator Nothing is displayed when the AC adaptor is being No display used. The adaptor power supply is valid. There is still ample battery power remaining. The amount of battery power remaining has decre
ページ19に含まれる内容の要旨
Setting the clock 5 Turn the JOG to select [Year (2006 to 2099)], and press the JOG. Set the current time (year, month, date, hour, minute). Notes The setting order is different depending on the “DateForm” settings in the menu. Check the “Date form settings” setting. (☞ P.XX) DateForm Setting order M (Month) / D (Date) / Y (Year) Month/Date/Year/Hour/Minute D (Date) / M (Month) / Y (Year) Date/Month/Year/Hour/Minute 6 Turn the JOG to select [Time], and press the JOG. Y (Year) / M (Month)
ページ20に含まれる内容の要旨
Date form settings Time form settings There are 3 types of date form. You can set the form to your There are 2 types of time form. You can set the form to your own preference. own preference. Form type Form subjects Form example Form type Form subjects Form example M/D/Y Month/Date/Year Jan 10 2006 12H AM/PM display 01 : 00 : 00 pm D/M/Y Date/Month/Year 10 Jan 2006 24H 24 hour display 13 : 00 : 00 Y/M/D Year/Month/Date 2006 Jan 10 < Default value > 12H < Default value > M/D/Y 1 While the
