ページ1に含まれる内容の要旨
RH1878P2S/RH1888P2S/RH1979P2S/RH1989P2S/RH1F99P2S-NAACLL-ENG
HDD/DVD
RECORDER
OWNER’S MANUAL
MODEL: RH188S/RH188HS/
RH199S/RH199HS/
RH200MHS
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and completely.
ページ2に含まれる内容の要旨
CAUTION: The apparatus should not be exposed to water CAUTION (dripping or splashing) and no objects filled with liquids, such RISK OF ELECTRIC SHOCK as vases, should be placed on the apparatus. DO NOT OPEN CAUTION concerning the Power Cord CAUTION: TO REDUCE THE RISK Most appliances recommend they be placed upon a OF ELECTRIC SHOCK dedicated circuit; DO NOT REMOVE COVER (OR BACK) That is, a single outlet circuit which powers only that NO USER-SERVICEABLE PARTS INSIDE appliance and has no addit
ページ3に含まれる内容の要旨
MP3/WMA file . . . . . . . . . . . . . . . . . . . . . . . . . .30 Contents Viewing a JPEG File . . . . . . . . . . . . . . . . . .31-32 Editing a MP3/WMA, JPEG, DivX file . . . . . .33-34 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-9 Symbol Used in this Manual . . . . . . . . . . . . . . . .4 Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . .35-41 Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . .4 About DVD recording . . . . . . . . .
ページ4に含まれる内容の要旨
Notes on Discs Introduction To ensure proper use of this product, please read this Handling Discs owner’s manual carefully and retain for future Do not touch the playback side of the disc. Hold the reference. disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc. This manual provides information on the operation and maintenance of your recorder. Should the unit require service, contact an authorized service location. About the Symbol Display “ ”
ページ5に含まれる内容の要旨
Recordable and Playable Discs DVD-RW (Digital Video Disc - ReWritable): DVD-RW discs can be formatted for VR mode recording or Video mode recording. These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the same Disc. [VR mode] Recordings can be extensively edited Playable only on VR mode compatible players (after finalization) [Video mode] Playable on regular DVD players (after finalization) Limited editing features DVD-R (Digital Video D
ページ6に含まれる内容の要旨
Playable Discs DVD (8 cm / 12 cm disc) Discs such as movies that can be purchased or rented Video CD (VCD) (8 cm / 12 cm disc) VIDEO CDs or CD-Rs/CD-RWs in VIDEO CD/Super VIDEO CD format Audio CD (8 cm / 12 cm disc) Music CDs or CD-Rs/CD-RWs in music CD format that can be purchased CD-R/CD-RW (8 cm / 12 cm disc) CD-R/CD-RW discs that contain audio titles, DivX, MP3, WMA, or JPEG files. Notes: Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some
ページ7に含まれる内容の要旨
About the internal hard disk Card useable on this unit drive (RH200MHS only) The internal hard disk drive (HDD) is a fragile piece of Compact Flash Card (CF) equipment. Please use the recorder following the Micro Drive (MD), ST1 MD guidelines below to protect against possible HDD Secure Digital Card (SD), Mini SD failure. Multi Media Card (MMC), MMC Plus, RS MMC, We recommend that you back up your important MMC Mobile recordings onto DVD discs in order to protect against xD-Picture Car
ページ8に含まれる内容の要旨
Front Panel e HDD/DVD abc defgh i j k Set the recorder’s mode to HDD or DVD. f x (STOP) Stops playback or recording. g N / X (PLAY / PAUSE) RH188S/RH188HS no p Starts playback. Pause playback or recording temporarily, press again to exit pause mode. abcdefgh i jk h z (REC) Starts recording. Press repeatedly to set the recording time. i PROG. (V/v) Scans up or down through memorized channels. no p RH199S/RH199HS j TIMESHIFT (RH188S/RH199S) Activates pause live TV/playback (timeshift) for a liv
ページ9に含まれる内容の要旨
AV/INPUT: Changes the input to ENTER ( ) Remote Control use for recording (Tuner, AV1-4, - Acknowledges menu selection. or DV IN). - Displays information while 0-9 numerical buttons: Selects viewing a TV program. numbered options in a menu. PR/CH (+/-): Scans up or down DUBBING: Copies DVD to HDD through memorized channels. (or HDD to DVD). DISPLAY: Accesses On-Screen TV Control Buttons: See page Display. 55. RETURN (O) a b Removes the menu. AUDIO ( ): Se
ページ10に含まれる内容の要旨
Hookup and Settings Rear Panel ab c de fg h i jk l m n a AERIAL i AC Power Cord Connect the aerial to this terminal. Plug into the power source. b HDMI Connector (Type A) j RF. OUT (RH188HS/RH199HS/RH200MHS only) Passes the signal from the AERIAL to your HDMI output providing a high quality interface for TV/monitor digital audio and video. k S-VIDEO OUT c EURO AV 2 DECODER Connect to a S-Video Input on TV. Connect the audio/video output of an external l EURO AV 1 AUDIO/VIDEO source (Pay-TV decod
ページ11に含まれる内容の要旨
SCART connection Connections to Your TV Connect the EURO AV1 AUDIO/VIDEO scart jack on Make one of the following connections, depending the recorder to the corresponding in jacks on the TV on the capabilities of your existing equipment. using the scart cable (T). When using the COMPONENT/PROGRESSIVE Video connection SCAN VIDEO OUT jacks, set the VIDEO OUT SELECT switch to COMPONENT. When using the Connect the VIDEO OUT jack on the recorder to the SCART jack, set the VIDEO OUTPUT SELECT vi
ページ12に含まれる内容の要旨
HDMI connection (RH188HS/ HDMI compatible TV HDMI RH199HS/RH200MHS only) If you have a HDMI TV or monitor, you can connect it to this recorder using a HDMI cable. H 1. Connect the HDMI jack on the recorder to the HDMI jack on a HDMI compatible TV or monitor (H). 2. Set the TV’s source to HDMI (refer to TV’s Owner’s manual). Notes: If your TV is NOT capable of handling 96 kHz sampling frequency, set the [Sampling Freq.] option Rear of the recorder to [48 kHz] on the setup menu (See page 19). Wh
ページ13に含まれる内容の要旨
Connecting to an Amplifier Rear of the recorder Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/ Pro Logic Connect the Left and Right AUDIO OUT jacks on the recorder to the audio left and right in jacks on your amplifier, receiver, or stereo system, using the audio cables (A). Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/ Video receiver equipped with a multi-channel A X O decoder (Dolby Digital™, MPEG 2, or DTS)
ページ14に含まれる内容の要旨
TV Accessory Audio/Video (A/V) VCR, Cable Box, or Connections Satellite Tuner, etc. Connecting a PAY-TV/Canal Plus Decoder You can watch or record PAY-TV/Canal Plus programmes if you connect a decoder (not supplied) to the recorder. Disconnect the recorder’s mains lead from the mains when connecting the decoder. To watch or record PAY-TV/Canal Plus programmes, set [AV2 Connection] option to [Decoder] (see page 18) and set the program’s [Decoder On/Off] option to [On] on the Setup menu (page 17)
ページ15に含まれる内容の要旨
Connecting to the AV IN 3 or AV IN 4 Connecting a Digital Camcorder Jacks Using the front panel DV IN jack, it is possible to Connect the input jacks (AV IN 3, AV IN 4) on the connect a DV digital camcorder and digitally transfer recorder to the audio/video out jacks on your DV tapes to DVD. accessory component, using audio/video cables. Use a DV cable (not supplied) to connect the DV Note: in/out jack of your DV camcorder to the front panel DV If you use the S-VIDEO IN jack on the front panel
ページ16に含まれる内容の要旨
General Operation Using the Home Menu 1. Press SETUP and the Setup menu appears. From the Home Menu screen you can access all the Media for playback and recording of the recorder. 2. Use v / V to select the desired option. 3. While the desired item is selected, press B to 1. Press HOME to display the Home Menu screen. move to the second level. 2. Use the b / B buttons to select a main option you 4. Use v / V to select the second desired option. want. Sub options appears. 5. Press B to move to t
ページ17に含まれる内容の要旨
Program Edit General Settings (Continued) You can perform a search to select and store TV Program Edit channels manually. When you select [Program Edit] in step 4 above, the You can edit a channel manually (add, delete, name, display for setting channels appears. move, etc.). 1. Use b / B to select the item and press v / V to 1. Select [Program Edit] option then press B. change the setting. 2. Press ENTER while [Edit] is selected. The Program List menu appears. [PR] indicates the selected pr
ページ18に含まれる内容の要旨
Caution General Settings (Continued) Once the setting for Progressive Scan output is entered, an image will only be visible on a Clock Set Progressive Scan compatible TV or monitor. If you set 1. Select [Clock set] option then press B. Progressive Scan to [ON] in error, you must reset the recorder. First, remove the disc in the recorder. Next, 2. Enter the necessary information for date and time. press STOP (x) and hold it for five seconds before b / B (left/right): Moves the cursor to the previ
ページ19に含まれる内容の要旨
Language Settings Audio Settings Each DVD disc has a variety of audio output options. Set the recorder’s Audio Output according to the type of audio system you use. Display Menu Select a language for the Setup menu and on-screen Dolby Digital / DTS / MPEG display. [Bitstream]: Select “Bitstream” if you connect the Disc Menu/Audio/Subtitle recorder’s DIGITAL AUDIO OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or [Original]Refers to the original language in which MPEG
ページ20に含まれる内容の要旨
Set Password Lock (Parental Control) Settings 1. Select [Set Password] option then press B. 2. Follow step 2 as shown “Rating”. To change the password, select the [Change], press ENTER and input the new 4-digit code then press ENTER. Input it again to verify. To delete the password, select [Delete] then press ENTER. If you forget your 4-digit code If you forget your password, to clear the current password, follow the procedure below. 1. Display Setup menu then select an 1 level icon. Rating 2.
