ページ1に含まれる内容の要旨
INSTALL INSTRUCTIONS KK-X-ST-RP
X = Specify vehicle: “F” = Ford, “C” = Chevrolet
FORD AND CHEVROLET VAN REAR STEP
TOOLS REQUIRED:
Ratchet Wrench 3/4” Combination Wrench
¾” Socket
HARDWARE:
QTY DESCRIPTION PART #
10 ½-13 x 1 ½” Hex Head Bolts GSM33050
4 ½-13 x 3 ½” Hex Head Bolts GSM33055
32 ½” Flat Washers GSM31012
10 ½” Lock Washers GSM31030
4 ½-13 Nylock Nuts GSM30020
10 ½-13 Hex Nuts GSM30011
MATERIALS:
QTY DESCRIPTION
1 Step with Non-Slip Surface
2 Support Chann
ページ2に含まれる内容の要旨
SUB ASSEMBLY: 1. Slide Support Channels into the Step. 2. Bolt together using (4) ½-13 x 4” Hex Head Bolts, ½-13 Nylock Nuts, ½” Flat Washers. Note: Be sure that flat side of Support Channels face towards outside of vehicle INSTALLATION: 1. MOUNT FRAME BRACKETS: • Determine Driver and Passenger side Frame Brackets using view on previous page. • Line brackets up with holes in frame rail of vehicle. • Bolt brackets to frame using (4) ½-13 x 1 ½” Hex Head Bolts, ½-13 Hex Head Nuts,