ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
Table of contents Warnings and Precautions -----------------------------------------------------------------------------------3 Warranty ---------------------------------------------------------------------------------------------------------4 What is in the package ---------------------------------------------------------------------------------------5 Introduction ------------------------------------------------------------------------------------------------------5 Features -------------
ページ3に含まれる内容の要旨
Editing a Title Icon ------------------------------------------------------------------------------------- 34 Color Correction---------------------------------------------------------------------------------------------------- 36 Audio Level Adjustment ------------------------------------------------------------------------------------------ 37 Setting the Video Standard (PAL/NTSC) --------------------------------------------------------------------- 38 GPI Functions-------------------------
ページ4に含まれる内容の要旨
Warnings and Precautions 1. Read all of these warnings and save them for later reference. 2. Follow all warnings and instructions marked on this unit. 3. Unplug this unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this unit in or near water. 5. Do not place this unit on an unstable cart, stand, or table. The unit may fall, causing serious damage. 6. Slots and openings on the cabinet top, back, and bottom are pr
ページ5に含まれる内容の要旨
ページ6に含まれる内容の要旨
What’s in the Package The following is a packing list, if any items are missing from your box please contact your dealer immediately. Item Description Q’ty 1 MP-6000 unit 1 2 Y/C Cable s-plug to s-plug 1.2m 1 3 Stereo Audio RCA 2 Phono to 2 Phono Cable 1 4 BNC to BNC 1.2m 3 5 IEEE 1394 6Pin to 4Pin Cable 1.8m 1 6 IEEE 1394 6Pin to 6Pin Cable 1.8m 1 7 AC power cord 1 8 AC/DC Switching Adaptor 12V / 4.2A 1 9 Instruction Manual 1 Introduction The MP-6000 is a DVD+R/RW drive based high q
ページ7に含まれる内容の要旨
Features - Multi Format - DV, YUV, Y/C (S-Video) and Composite video inputs. - IEEE-1394 6-pin FireWire (iLink) input port with 12V bus power. Available in DV25 NTSC 4:1:1 / PAL 4:2:0 formats. - YUV, Y/C, Composite video outputs with selectable NTSC/PAL video system. - Features Video color processor control of Brightness, Color, Contrast, and Tint (Tint is NTSC only). - Two channels Balanced (XLR) and unbalanced (RCA) analog audio input and output for interconnection with professional dig
ページ8に含まれる内容の要旨
Functions: Front Panel Power On / Off Fast Rewind Mode at 2X,4X,8X,16X,30X,60X,100X speed Fast Forward Mode at 2X,4X,8X,16X,30X,60X,100X speed Stop Play a Title/Track Record. Press and hold the REC button and press on the “ ” button to start recording a clip. Pause/Play a Title/Track 7
ページ9に含まれる内容の要旨
EJECT button. Press to Open/Close Disc Tray Jump to Previous track (Title) Jump to Next track (Title) Input Source Select of DV, S, CV, or YUV Please note, system will take about 2-3 seconds to switch between video sources Selects the recording video quality at HQ, SP, LP, EP or SLP. “MENU” KEY has several different functions, 1. COLOR CORRECTION: To adjust Brightness, Contrast, Color, and Tint 2. GPI FUNCTION: To set up GPI trigger modes, Record/Pause or Play/Pause with the setting i
ページ10に含まれる内容の要旨
4. SYSTEM SETUP: a. Set time: Manually set up timing. b. System info: Check system information. c. Factory Reset: Change all the setting to Factory Default. d. Quit: 5. MAKE COMPATIBLE: This function is similar to “FINALIZE”, but it only works when you insert a DVD+RW disc. The purpose is to make this disc more compatible to playback by other DVD players. Pause the desired image as the Icon for the Title Finalize a DVD+R Disc (DVD+RW does not need finalizing) Erase Disc (DVD+RW only
ページ11に含まれる内容の要旨
ページ12に含まれる内容の要旨
4-Pin XLR locked 12Volt Power connector Connecting 12VDC 2.5A input from an external DC adaptor. Black Burst output terminal for video monitoring Component Y.U.V. Video input/output terminal. Composite Video & S-Video (Y/C) Input and Output IEEE-1394 6-pin FireWire (iLink) DV Input and loop thru output Available in DV25 NTSC 4:1:1 or PAL 4:2:0 format Note: This IEEE1394 interface does not take control command or video signal from a PC / MAC. Two channels Unbalanced L/R Audio input and Ou
ページ13に含まれる内容の要旨
Installation The following are simple examples of how to integrate the MP 6000 into any video setup. Obviously there are too many possible combinations to cover them all in detail, but these examples cover the most frequently used input and output combinations. 1. Connecting composite video and stereo audio outputs from the MP-6000 to a TV set / monitor. Alternatively you may prefer to connect the audio outputs to an amplifier or speakers. 12
ページ14に含まれる内容の要旨
2. Connecting YUV output from the MP-6000 to a Projector. 3. Connecting Y/C or Composite video and stereo audio outputs from an analogue camcorder or DVD player to the MP-6000. 13
ページ15に含まれる内容の要旨
4. Connecting a DV (IEEE1394) output from a DV camcorder or DV Deck to the MP-6000. With this connection you can also use DV device control from the MP 6000 to cue up the tape. 5. Connecting a Betacam VTR to the MP-6000. 14
ページ16に含まれる内容の要旨
Quick Start Guide: As the heading suggests, this is the quick start section. If you require more detailed operating instructions please go to page 18. Step 1: Turn on power to the MP-6000, the source and the monitor. Step 2: Press the “POWER” button, to turn on the MP-6000. The word “MP-6000” and then “BOOT” will appear on the display window. After a couple seconds, it will present “NO Disc” that means the tray is empty. Please place a disc on the tray. Note: The upper right window on t
ページ17に含まれる内容の要旨
Color Tint (This function only works on composite and S-video input in NTSC standard.) Note: The Color Processor only works on analogue input signals, such as composite, Y/C, or component. It does not work on a DV input signal. b. Press the “ENTER” button again, and use the Left and Right arrow buttons to adjust the level. To confirm the changes, press the “ENTER” button again. Select “Save” and then “ENTER” to save the settings. To cancel the changes, select “Abort” To restore fact
ページ18に含まれる内容の要旨
Step 14: “ERASE” the disc: This function is only used in DVD+RW discs. It can not be used with DVD+R disc. DVD+RW disc can be recorded and erased repeatedly. If there is any error and the recording needs to be erased, there are two different methods to do it. a. Erase the entire “Title” (Track) in DVD+RW disc. Press “ERASE” button, the entire disc will be erased in about 20 second. b. Erase the last track in DVD+RW disc. Press “TITLE” button, then press “MENU”. Go to “2. ERASE LAST TITLE”
ページ19に含まれる内容の要旨
Setting Up Connecting Hopefully you have read the installation chapter, and you’ve studied the diagrams on pages 12 – 14. With your chosen source and a suitable monitor connected your ready to go. Connect the 12v power supply to the MP 6000 DC Input Socket, and connect the AC power cord to a suitable socket. You could alternatively use other, stable 12v power feeds, if for example you are working in the field. The MP 6000 would require a 12v DC supply with a constant current of 3A. Power
ページ20に含まれる内容の要旨
LCD Display The LCD on the front panel of the MP 6000 displays various forms of information. Here are some of the many examples Displayed when first switched on. Displayed briefly while the MP 6000 is booting up. Displayed when the Eject Button is pressed. General display indicating the Record Quality selected and the active video input. in this example HQ is the Record Quality – other options are SP, LP, EP and SLP. The active video input is Composite Video – other options are S-VIDEO,
