ページ1に含まれる内容の要旨
Register your product and get support at
MCD122
www.philips.com/welcome
EN User manual
ページ2に含まれる内容の要旨
5 Play 17 Contents Play a disc 17 Use the disc menu 17 Select an audio language 17 1 Important 5 Select a subtitle language 17 Safety 5 Play from USB 18 Important Safety Instructions 5 Play DivX video 18 Hearing safety 6 Play MP3/WMA/picture fi les 18 Notice 7 Play control 18 Select repeat/shuffl e play options 18 Repeat A-B (DVD/VCD/CD/MP3/ 2 Your DVD Micro Theater 8 WMA) 19 Introduction 8 Search forward/backward 19 What’s in the box 8 Search by time or chapter/track Overview of the main unit 9
ページ3に含まれる内容の要旨
8 Adjust volume level and sound effect 24 Adjust volume level 24 Select a sound effect 24 Select a preset sound effect 24 Enhance bass 24 Select automatic loudness control 24 Mute sound 24 Listen through headphone 24 9 Other features 25 Activate demonstration mode 25 Adjust brightness of display panel 25 Set the alarm timer 25 Set the sleep timer 25 Connect other devices 25 Listen to an audio player 25 Record to a digital recorder 26 10 Product information 27 Specifi cations 27 Amplifi er 27 Disc
ページ4に含まれる内容の要旨
g Do not block any ventilation openings. 1 Important Install in accordance with the manufacturer’s instructions. h Do not install near any heat sources such Safety as radiators, heat registers, stoves, or other apparatus (including amplifi ers) that Know these safety symbols produce heat. i Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. j Only use attachments/accessories specifi e
ページ5に含まれる内容の要旨
• Do not mix batteries (old and new or Hearing safety carbon and alkaline, etc.). Listen at a moderate volume. • Remove batteries when the unit is not • Using headphones at a high volume can used for a long time. impair your hearing. This product can o Apparatus shall not be exposed to produce sounds in decibel ranges that may dripping or splashing. cause hearing loss for a normal person, even for exposure less than a minute. The p Do not place any sources of danger on higher decibel r
ページ6に含まれる内容の要旨
This apparatus includes this label: Notice Any changes or modifi cations made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to Note separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene • The type plate is located on the bottom of the apparatus. (bags, prote
ページ7に含まれる内容の要旨
DVD region code Countries 2 Your DVD Asia Pacifi c, Taiwan, Korea Micro Theater Australia, New Zealand Congratulations on your purchase, and welcome to Philips! To fully benefi t from the support that Philips offers, register your product at www.Philips.com/welcome. What’s in the box Introduction Check and identify the contents of your package: With this unit, you can: • Main unit • watch video from DVD/VCD/SVCD or • 2 speakers USB devices • Remote control with battery • enjoy audio from di
ページ8に含まれる内容の要旨
Overview of the main unit a b c d e f ghijk o n m l a h DBB • Turn on the apparatus; switch to • Turn on or off dynamic bass standby mode. enhancement. b VOLUME / i • Adjust volume. • Start or pause play. • Adjust time. j • During timer setting, select a source. • Stop play. c SOURCE • In demo mode, activate or deactivate • Select a source. demonstration. d Display panel k MODE • Display current status. • Select repeat play modes. • Select shuffl e play modes. e • Open or close the disc compar
ページ9に含まれる内容の要旨
c DISPLAY/RDS (RDS function unavailable Overview of the remote for this version) control • Display play information on a connected TV. d DISC MENU • For video discs: access or exit the disc a menu. • For video discs with playback b control(PBC): turn on/off PBC. e AUDIO c x • For VCD, select stereo, mono-left or w d mono-right channel. v • For DVD/DivX video, select an audio e language. u f / • Search within a track. f • Tune to a radio station. • For menus, navigate left/right. g • Mo
ページ10に含まれる内容の要旨
m SUBTITLE • Select a subtitle language. n GOTO • During disc play, specify a position to start play. o ANGLE/PROG • Select a DVD camera angle. • Program radio stations. p Numeric keypad • Select a title/chapter/track directly. q • Stop play. r / • Skip to the previous/next track. • Skip to the previous/next title or chapter. • Select a preset radio station. s • Start or pause play. t DSC • Select a preset sound setting. u OK • Confi rm a selection. v A-B • Repeat a specifi c section within a
ページ11に含まれる内容の要旨
2 Insert the stripped part of the wire 3 Connect completely. • Insert the right speaker wires to “ R”, left speaker wires to “ L”. Place the unit • Insert the red wires to “ +”, black wires to “ -”. 3 Release the socket fl ap. abc Connect FM antenna 1 Place the unit near to the TV. 8 2 Place the left and right speakers at equal distance from the TV and at an angle of approximately 45 degrees from the listening position. Note • To avoid magnetic interference or unwanted noise, never place t
ページ12に含まれる内容の要旨
Connect TV Note • The progressive scan video quality is only available Connect video cables when a progressive scan TV is connected. • If your TV does not support progressive scan, you With this connection, you can watch video from cannot view the picture. the unit on the TV screen. • For how to activate progressive scan on your TV, refer to the TV user manual. You can select the best video connection that your TV suppor ts. • Option 1: Connect through SCART Connect a progressive scan TV t
ページ13に含まれる内容の要旨
Option 3: Connect through Connect power composite video 8 8 TV Caution • Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back 1 Connect the supplied composite video or the underside of the unit. • Before connecting the AC power cord, ensure you have cable to: completed all other connections. • the VIDEO OUT socket on this unit. • the video input socket on the TV. 1 Connect the AC power cord to the wall socket. Connect audio cables 8 TV
ページ14に含まれる内容の要旨
Set clock 4 Get started 1 In the standby mode, press and hold CLOCK to activate the clock setting mode. Caution » The hour digits are displayed and begin • Use of controls or adjustments or performance of to blink. procedures other than herein may result in hazardous radiation exposure or other unsafe operation. 2 Press + V OL - to set the hour, then press CLOCK again. Always follow the instructions in this chapter in » The minute digits are displayed and sequence. begin to blink. If you
ページ15に含まれる内容の要旨
• The TV supports progressive scan Tip signals. • The video-in channel is between the lowest and highest • You have connected this unit with the channels and may be called FRONT, A/V IN, VIDEO etc. TV through component video. See the TV user manual on how to select the correct input on the TV. 1 Turn on the TV. 2 Ensure that the TV progressive scan mode is deactivated (see the TV user manual). 3 Switch the TV to the correct viewing Select the correct TV system channel for this unit. 4 Pre
ページ16に含まれる内容の要旨
To access or exit the menu manually: 5 Play 1 Press DISC MENU . For VCD with PlayBack Control (PBC) feature (version 2.0 only): With the PBC feature, you can play VCD Note interactively according to the menu screen. • With some disc/fi le types, play may differ. 1 During play, press DISC MENU to enable/ disable PBC. » When PBC is enabled, the menu screen is displayed. » When PBC is disabled, normal play is Play a disc resumed. Caution Select an audio language • Never look at the laser beam i
ページ17に含まれる内容の要旨
• To stop play, press . Play from USB • To pause or resume play, press . • To change a subtitle language, press Note SUBTITLE. • Ensure that the USB device contains playable music, pictures or video. Note • You can only play DivX videos rented or purchased through the DivX registration code of this unit. 1 Insert the USB device. • Subtitle fi les with the following fi lename extensions (.srt, .smi, .sub, .ssa, .ass) are supported but do not appear on the fi le navigation menu. • The subtitle
ページ18に含まれる内容の要旨
• To resume normal play, press MODE/ Resume video play from last stopped DIM repeatedly until no option is point displayed. Note Repeat A-B (DVD/VCD/CD/MP3/ • This feature is only available for DVD/VCD play. WMA) 1 During music or video play, press A-B at 1 In stop mode and when the disc has not the start point. been removed, press . 2 Press A-B at the end point. To cancel resume mode and stop play » The selected section starts to play completely: repeatedly. 1 In stop mode, press .
ページ19に含まれる内容の要旨
Change the audio channel Note • This feature is only available for VCD/DivX play. 1 During play, press AUDIO repeatedly to select an audio channel available on the disc: • Mono Left • Mono Right • Stereo Select a camera angle Note • This feature is only available for DVDs recorded with multiple camera angles. 1 During play, press ANGLE/PROG repeatedly to select a camera angle. Picture view options Preview pictures 1 During play, press . » The pictures in the current folder are displayed.
ページ20に含まれる内容の要旨
• [All] – If the connected device 6 Adjust settings supports multi-channel audio formats, select this option. [Night Mode] 1 Press SY STEM MENU. Make loud sound level softer and soft sound level louder so that you can watch the DVD 2 Select a setup page. movies at a low volume, without disturbing 3 Select an option and then press . others. 4 Select a setting and then press OK. • [On] – enjoy quiet viewing at night • To return to the previous menu, press (DVDs only). . • [Off] – enjoy su
