ページ1に含まれる内容の要旨
DVP5200
DVD VIDEO PLAYER DVP5100
User manual
Thank you for choosing Philips.
Need help fast?
Read your User’s Manual first for quick tips that make using
your Philips product more enjoyable.
If you have read your instructions and still need assistance,
you may access our online help at www.philips.com/support
ページ2に含まれる内容の要旨
Important notes for users in the CAUTION U.K. Use of controls or adjustments or performance of procedures other Mains plug This apparatus is fitted with an approved 13 than herein may result in hazardous Amp plug. To change a fuse in this type of plug radiation exposure or other unsafe proceed as follows: operation. 1 Remove fuse cover and fuse. 2 Fix new fuse which should be a BS1362 5 Amp, VAROITUS A.S.T.A. or BSI approved type. Muiden kuin tässä esitettyjen 3 Refit the fuse cover. toimintoje
ページ3に含まれる内容の要旨
Index DK Advarsel: Usynlig laserstråling ved åbning English ------------------------------------------- 6 når sikkerhedsafbrydere er ude af funktion. Undgå utsættelse for stråling. Bemærk: Netafbryderen er sekundært indkoblet og ofbryder ikke strømmen fra nettet. Den indbyggede netdel er derfor Français --------------------------------------- 40 tilsluttet til lysnettet så længe netstikket sidder i stikkontakten. S Klass 1 laseraparat Varning! Om apparaten används på annat Español -------------
ページ4に含まれる内容の要旨
General Information Environmental Information Laser safety All unnecessary packaging has been This unit employs a laser. Due to possible omitted. The packaging has been made eye injury, only a qualified service person easy to separate into two materials: should remove the cover or attempt to cardboard (box, buffer) and polyethylene service this device. (bags, protective foam sheet). NOTE: Your DVD player consists of materials PICTURES SHOWN MAYBE which can be recycled and reused if DIFFERENT BET
ページ5に含まれる内容の要旨
Language Code Abkhazian 6566 Inupiaq 7375 Pushto 8083 Afar 6565 Irish 7165 Russian 8285 Afrikaans 6570 Íslenska 7383 Quechua 8185 Amharic 6577 Italiano 7384 Raeto-Romance 8277 Arabic 6582 Ivrit 7269 Romanian 8279 Armenian 7289 Japanese 7465 Rundi 8278 Assamese 6583 Javanese 7486 Samoan 8377 Avestan 6569 Kalaallisut 7576 Sango 8371 Aymara 6589 Kannada 7578 Sanskrit 8365 Azerhaijani 6590 Kashmiri 7583 Sardinian 8367 Bahasa Melayu 7783 Kazakh 7575
ページ6に含まれる内容の要旨
English Contents Language Code ................................................... 5 Disc Operations Playable Discs ................................................. 19 Region Codes ................................................. 19 Introduction Playing discs ..................................................... 19 Supplied accessories ....................................... 8 Basic playback controls................................. 20 Care and safety information .......................... 8 S
ページ7に含まれる内容の要旨
Contents DVD Menu Options General Setup menu ............................... 26-27 Locking/Unlocking the disc for viewing ... 26 Dimming system’s display screen .............. 26 Programming disc tracks .......................26-27 OSD Language ............................................... 27 Screen Saver - turning on/off ..................... 27 Sleep ................................................................ 27 DivX VOD registration code ..................... 27 Audio Setup Menu ......
ページ8に含まれる内容の要旨
English Introduction Do not block the vents Supplied accessories – Do not operate the DVD Player in an enclosed cabinet, allow about 10 cm (4 inch) of free space all around the player for adequate ventilation. 10 cm (4 inches) 10 cm PHILIPS 10 cm (4 inches) (4 inches) Remote Control and Care of the cabinet two AA batteries PREVIEW PREVIEW M MUTE UTE – Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives.
ページ9に含まれる内容の要旨
Connections Connecting TV S-VIDEO IN AUDIO TV IN S-VIDEO IN IN AUDIO TV IN IN VIDEO IN S-VIDEO VIDEO IN IN AUDIO TV IN IN VIDEO IN S-VIDEO IN AUDIO IN TV IN VIDEO IN 1 2 1 IMPORTANT! Using Composite Video jacks – You only need to make one video (CVBS) connection from the following 1 Use the composite video cable (yellow) to options, depending on the connect the DVD Player’s CVBS (VIDEO) capabilities of your TV system. jack to the video input jack (or labeled as – Connect the DVD system directly
ページ10に含まれる内容の要旨
English Connections RF coaxial cable to TV 2 COMPONENT VIDEO IN Back of RF Modulator S-VIDEO IN V (Pr/Cr) (example only) AUDIO IN U (Pb/Cb) INT IN TO TV VIDEO AUDIO IN VIDEO IN IN R L COMPONENT VIDEO IN Y S-VIDEO IN V (Pr/Cr) AUDIO IN U (Pb/Cb) VIDEO IN Y CH3 CH4 Antenna or 1 2 Cable TV signal 1 IMPORTANT! IMPORTANT! – If your TV only has a single – The progressive scan video Antenna In jack (or labeled as 75 quality is only possible when using Y ohm or RF In,) you will need an
ページ11に含まれる内容の要旨
Connections Connecting the power cord COMPONENT VIDEO IN S-VIDEO IN AUDIO V (Pr/Cr) OUT ~ AC MAINS U (Pb/Cb) VIDEO IN Y After everything is connected properly, plug in the AC power cord to the power outlet. Never make or change any connections with the power switched on. When no disc is loaded, press STANDBY ON on the DVD Player front panel, “NO DISC” may appear on the display panel. NO DISC 11 English
ページ12に含まれる内容の要旨
English Connections Optional: Connecting to an Optional: Connecting Digital AV Audio System Receiver STEREO AV Receiver AUDIO AUDIO IN IN DIGITAL DIGITAL Stereo system has Dolby Pro Logic Receiver has a PCM, Dolby Digital, or Right / Left Audio In jack or MPEG2 decoder 1 Select one of the video connections 1 Select one of the video connections (CVBS VIDEO IN, SCART or (CVBS VIDEO IN, SCART or COMPONENT VIDEO IN) depending on COMPONENT VIDEO IN) depending on the options available on your TV. th
ページ13に含まれる内容の要旨
Functional Overview Front and Rear Panels T NEXT – To search or select next chapter or track PREV S STANDBY-ON B – To search or select previous chapter or – To switch the DVD Player to Standby track mode or ON 9 STOP Disc tray – To stop playback OPEN/CLOSE / 2; PLAY – Open/Close the disc tray – To start or interrupt playback Display IR Sensor – Shows the current status of the DVD – Point the remote control towards this Player sensor TV OUT – Connect to Scart input of a TV Mains (AC Power Cord) A
ページ14に含まれる内容の要旨
English Functional Overview Remote Control RETURN/TITLE POWER B – To go back to previous menu/ show – To switch the DVD player to title menu standby mode or ON DISC MENU 0-9 numerical key pad – Enters or exits the disc contents – Selects numbered items in a menu menu – Switches on or off the playback control mode (for VCD version DISPLAY 2.0 only) – Displays information on TV screen during playback 1 2 3 4 – Selects an item in the menu/ SYSTEM MENU fast forward/backward, slow forward/ – Access o
ページ15に含まれる内容の要旨
Getting Started Step 1: Inserting batteries into Step 2: Setting up the TV the Remote Control IMPORTANT! Make sure you have completed all 3 the necessary connections. (See 1 pages 9-10 “Connecting TV”). 2 1 Turn on the TV and set to the correct video-in channel. You should see the Philips DVD background screen on the TV. 1 Open the battery compartment. 2 Usually these channels are between the 2 Insert two batteries type R06 or AA, lowest and highest channels and may be following the indication
ページ16に含まれる内容の要旨
English Getting Started 7 Select {COMPONENT} to {YUV}, then Setting up Progressive Scan feature OK to confirm. (for Progressive Scan TV only) 8 Select {PROGRESSIVE} to {ON}, then OK The progressive scan display twice the to confirm. number of frames per seconds than ➜ The instruction menu appears on the interlaced scanning (ordinary normal TV TV. system). With nearly double the number of lines, progressive scan offers higher picture resolution and quality. ACTIVATING PROGRESSIVE SCAN: 1. ENSUR
ページ17に含まれる内容の要旨
Getting Started 4 Press 3 4 to highlight one of the options To deactivate Progressive manually below: When the distorted sign still PAL – Select this if the connected TV is appears on the TV, it may be due to PAL system. It will change the video signal the connected TV does not accept of a NTSC disc and output in PAL format. progressive signals, and progressive is set by mistake. You must reset the unit to NTSC – Select this if the connected TV interlace format. is NTSC system. It will chang
ページ18に含まれる内容の要旨
English Getting Started Step 3: Setting language Setting the Audio, Subtitle and Disc menu language preference You can choose your own preferred You can select your preferred language language or soundtrack from audio, settings. This DVD Player will subtitles and disc menu languages. If the automatically switch to the language for language selected is not available on the you whenever you load a disc. disc, the disc’s default language will be used instead. Setting the OSD Language The On-screen
ページ19に含まれる内容の要旨
Disc Operations IMPORTANT! Region Codes – If the inhibit icon (ø) appears on The regional code ‘X’ (denotes the ALL the TV screen when a button is number) of this device is shown at pressed, it means the function is not the back panel of this device. If the available on the current disc or at X DVD is marked with a different the current time. region code, it cannot be played on – Depending on the DVD or VIDEO this device. CD, some operations may be different or restricted. Helpful Hints: – Do n
ページ20に含まれる内容の要旨
English Disc Operations Basic playback controls Selecting various repeat/shuffle functions Unless otherwise stated, all operations described are based on Remote Control Repeat play mode use. While playing a disc, press REPEAT Pausing playback continuously to choose a ‘Play Mode’. 1 During playback, press PAUSEÅ. CHAPTER (DVD) ➜ Playback will pause and sound will be – to repeat playback of the current muted. chapter. 2 To resume normal playback, press TRACK/TITLE (CD/SVCD/VCD/DVD) PLAY B. – to
