ページ1に含まれる内容の要旨
DVD Player
DVD-1080P7
www.samsung.com/sg
ページ2に含まれる内容の要旨
PRECAUTIONS PRECAUTIONS 1. Setting up - When condensation forms inside the player due to sharp changes in temperature, the - Refer to the identification label located on player may not operate correctly. If this the rear of your player for its proper operat- occurs, leave the player at room tempera- ing voltage. ture until the inside of the player becomes - Install your player in a cabinet with ade- dry and operational. quate ventilation holes. (7~10cm) Do not block ventilation holes on any of t
ページ3に含まれる内容の要旨
BEFORE YOU TABLE OF BEFORE YOU TABLE OF START CONTENTS START CONTENTS Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Accessories Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Setup - General Features . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Disc Type and Characteristics . . . . . . . . . . . . . . . . 5 + / - Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Tour of the Remote Control . . . . . . . . .
ページ4に含まれる内容の要旨
SETUP SETUP Note General Features - Discs which cannot be played with this player. Excellent Sound • DVD-ROM • DVD-RAM Dolby Digital, a technology developed by Dolby • CD-ROM • CDV Laboratories, provides crystal clear sound reproduc- • CDI • CVD tion. • CDGs play audio only, not graphics. Screen Both regular and widescreen(16:9) pictures can be - Ability to play back may depend on recording viewed. conditions. Slow Motion • DVD-R, +R An important scene can be viewed in slow motion. • CD-RW •
ページ5に含まれる内容の要旨
Disc Type and Characteristics This DVD player is capable of playing the following types of discs with the corresponding logos: Disc Types (Logos) Recording Types Disc Size Max. Playing Time Characteristics - DVD contains excellent sound and Single-sided 240 min. DVD 12 Cm video due to Dolby Digital and MPEG- Double-sided 480 min. Audio 2 system. + - Various screen and audio functions Video Single-sided 80 min. 8 Cm can be easily selected through the on- Double-sided 160 min. screen menu. VIDEO-C
ページ6に含まれる内容の要旨
Description Front Panel Controls 10 9 OPEN/CLOSE 1 2 3 4 5 6 8 7 6. VIDEO SEL. 1. STANDBY/ON ( ) Press to change Video output mode. When STANDBY/ON is pressed on, the indicator goes out and the player is turned on. 7. STOP ( ) Stops disc play. 2. STANDBY Indicator When the unit is first plugged in, the indicator lights. 8. SKIP ( ) / SEARCH Use to forward skip a scene or music. 3. DISC TRAY Place the disc here. 9. SKIP ( ) / SEARCH 4. OPEN/CLOSE ( ) Use to reverse skip a scene or music. Press
ページ7に含まれる内容の要旨
Rear Panel 1 2 6 13 5 4 1. DIGITAL AUDIO OUT JACKS 5. S-VIDEO OUT JACK - Use either an optical or coaxial digital cable to con- - Use the S-Video cable to connect this jack to the S- nect to a compatible Dolby Digital receiver. Video jack on your television for higher picture quality. - Use either an optical or coaxial digital cable to con- - The Video Output in Setup Menu must be set to nect to an A/V Amplifier that contains a Dolby Digital, S-Video. MPEG2 or DTS decoder. 6. HDMI OUT JACK 2. C
ページ8に含まれる内容の要旨
Tour of the Remote Control 7. INSTANT REPLAY Button This function is used to replay the previous 10 seconds of a movie from the current position. - 17 1 8. SKIP Buttons ( ) / 18 2 Use to skip the title, chapter or track. 3 19 9. STOP Button ( ) 10. TV VOL (+, -) Buttons 20 Control volume 11. MENU Button 4 Brings up the DVD player’s menu. 12. ENTER/ Buttons / , / This button functions as a toggle switch. 13. EZ VIEW Button 5 21 The aspect ratio of a picture can easily be adjusted acco
ページ9に含まれる内容の要旨
CONNECTIONS CONNECTIONS Choosing a Connection The following shows examples of connections commonly used to connect the DVD player with a TV and other components. Before Connecting the DVD Player - Always turn off the DVD player, TV, and other components before you connect or disconnect any cables. - Refer to the user’s manual of the additional components you are connecting for more information on those particular components. Connection to a TV (For Video) 1 Using video/audio cables, connect the
ページ10に含まれる内容の要旨
Connection to a TV (S-Video) - Connecting to your TV using an S-Video cable. - You will enjoy high quality images. S-Video separates the picture element into black and white(Y) and color(C) signals to present clearer images than regular video input mode. (Audio signals aredelivered through the audio output.) 1 Using an S-Video cable (not included), connect the S- VIDEO OUT terminal on the rear of the DVD player to the S-VIDEO IN terminal of TV. 2 Using the audio cables, connect the AUDIO (red an
ページ11に含まれる内容の要旨
Connection to a TV (Interlace) - Connecting to your TV using Component video cables. - You will enjoy high quality and accurate color reproduction images. Component video separates the pic- B R ture element into black and white(Y), blue(P ), red(P ) signals to present clear and clean images. (Audio signals are delivered through the audio output.) 1 Using component video cables (not included), connect the COMPONENT VIDEO OUT terminal on the rear of the DVD player to the COMPONENT IN terminal of T
ページ12に含まれる内容の要旨
Connection to a TV (Progressive) 1 Using component video cables (not included), connect the COMPONENT VIDEO OUT terminal on the rear of the DVD player to the COMPONENT IN terminal of TV. 2 RED BLUE GREEN Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of TV. Turn on the DVD player and TV. RED WHITE 3 Audio Cable Press the input selector on your TV remote control until the Component cable WHITE RED Com
ページ13に含まれる内容の要旨
Connecting to a TV with DVI Jack 1 Using the HDMI-DVI cable (not included), connect the HDMI OUT terminal on the rear of the DVD player to the DVI IN terminal of your TV. 2 Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the WHITE RED AUDIO (red and white) IN terminals of your TV. Audio Cable Turn on the DVD player and TV. RED WHITE HDMI-DVI cable (Not Included) 3 Press the input selector on your TV remote control until the DVI signal fro
ページ14に含まれる内容の要旨
• HDMI (High Definition Multimedia Interface) • Why does Samsung use HDMI? Analog TVs require an analog video/audio signal. HDMI is an interface to enable the digital transmission However, when playing a DVD, the data transmitted of video and audio data with just a single connector. to a TV is digital. Therefore either a digital-to-analog Using HDMI, the DVD player transmits a digital video converter (in the DVD player) or an analog-to-digital and audio signal and displays a vivid picture on a T
ページ15に含まれる内容の要旨
Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier) 1 If using an optical cable (not included), connect the DIGI- TAL AUDIO OUT (OPTICAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (OPTICAL) terminal of the Amplifier. If using a coaxial cable (not included), connect the DIGI- TAL AUDIO OUT (COAXIAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) termi- nal of the Amplifier. 2 Using the video signal cable(s), connect the VIDEO, S- VI
ページ16に含まれる内容の要旨
BASIC FUNCTIONS BASIC FUNCTIONS 4. Stopping Play Playing a Disc Press the STOP ( ) button during play. 5. Removing Disc Before Play Press the OPEN/CLOSE ( ) button. - Turn on your TV and set it to the correct Video Input by pressing TV/VIDEO button on the TV 6. Pausing Play remote control. Press the PLAY/PAUSE ( ) or STEP button on the remote control during play. - If you connected an external Audio System, turn - Screen stops, no sound. on your Audio System and set it to the correct To resume,
ページ17に含まれる内容の要旨
Using the Search and Skip Using the Display Function Functions When Playing a DVD/VCD/MPEG4 During play, you can search quickly through a chapter or 1. During play, press the INFO button on the remote control. track, and use the skip function to jump to the next selection. - You can select Info in the function menu by pressing the MENU button. Searching through a Chapter or 2. Press the /buttons to select the desired item. Track - When playing VCD2.0, this function works only when During pla
ページ18に含まれる内容の要旨
Using the Disc and Title Using the Function Menu Menu Using the Function Menu Using the Disc Menu (DVD/VCD) 1. Press the MENU button during playback. 1. During the playback of a DVD disc, press the MENU button on the remote control. 2. Press the / buttons to select Function, then press the or ENTER button. 2. Press the / buttons to select Disc Menu, then press the - Info (See pages 17) or ENTER button. - Zoom (See page 22) - Bookmark (See pages 21 to 22) - Repeat (See pages 18 to 19)
ページ19に含まれる内容の要旨
Using the A-B Repeat function 1. Press the REPEAT button on the remote control. 2. Press the / buttons to select A-B button. ADVANCED ADVANCED 3. Press the ENTER button at the point where you want repeat play to start (A). B is automatically highlighted. FUNCTIONS FUNCTIONS 4. Press the ENTER button at the point where you want the repeat play to stop (B). Adjusting the Aspect Ratio - To return to normal play, press the CANCEL button. (EZ View) 3. To return to normal play, press REPEAT b
ページ20に含まれる内容の要旨
If you are using a 4:3 TV 2. To remove the AUDIO icon, press the CANCEL or RETURN For 16:9 aspect ratio discs button. - 4:3 Letter Box Note Displays the content of the DVD title in 16:9 aspect ratio. The - This function depends on audio languages are black bars will appear at the top and bottom of the screen. encoded on the disc and may not work. - 4:3 Pan Scan The left and right portions of the screen are cut off and the - A DVD disc can contain up to 8 audio lan- central portion of the 16:9 sc
