ページ1に含まれる内容の要旨
DOUBLE DIN SIZE CD/MD-RECEIVER
DPX-7010MD
INSTRUCTION MANUAL
© PRINTED IN JAPAN B64-1720-00 (M) (+)
01/12 11 10 9 8 7 6 5 4 3 2 1 00/12 11 10 9 8 7 6 5
ページ2に含まれる内容の要旨
Contents Before use DSP/Graphic Equalizer features Safety precautions ........................................................................3 DSP (Digital Signal Processor) ....................................................20 Handling Compact discs ...............................................................5 Sound Field Control.....................................................................20 Graphic Equalizer ........................................................................2
ページ3に含まれる内容の要旨
Safety precautions IMPORTANT INFORMATION 2WARNING 2CAUTION You cannot connect the unit directly to the To prevent injury or fire, take the To prevent damage to the machine, following CD automatic changers. If you want to use older changers with the unit, following precautions: take the following precautions: follow the directions below according to the • Insert the unit all the way in until it is fully • Make sure to ground the unit to a negative type of changer you own: locked in place. Otherwi
ページ4に含まれる内容の要旨
Safety precautions Handling Mini discs Lens Fogging NOTE • The MD shutter is designed so that it cannot In cold climates, there may be a period after • If you experience problems during be opened. If forced open, the cartridge will you turn on your vehicle's heater when the installation, consult your Kenwood dealer. be damaged and use of the MD will no lens that guides the laser beam used in your longer be possible. If the shutter has been CD/MD player fogs up. If this happens, you • If the uni
ページ5に含まれる内容の要旨
Handling Compact discs Playing a CD that is dirty, scratched or back in their cases. Do not pile up CDs that Removing the CD warped can cause the sound to skip and are removed from their cases or prop them Only remove the CD from the machine in a the unit to operate incorrectly, resulting in against something. horizontal direction, holding it flat. You may worsened sound quality. Take the damage the surface of the CD if you try Cleaning CDs following precautions to prevent your CDs pulling it do
ページ6に含まれる内容の要旨
General features Power 5/∞ ATT COL SRC OPEN 4/¢ Turning on the power: Press the SRC (source) button. NOTE MD CD RECEIVER OPEN 7 BAND EQUALIZER Turn the power on before carrying out the following procedures. Turning off the power: PWR CRSC OFF Press the SRC button for at least one second. Switching Modes DISC AUD Switching Modes: DISP USER FNC NAME.S Each time you press the SRC (source) button, the mode switches as follows: Tuner mode AUD DISP FM/AM MD mode CD mode External disc control mode 1 Ex
ページ7に含まれる内容の要旨
switching adapter (KCA-S210A or CA-C1AX) or CD changer Please refer to the following for the contents of the (KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is adjustment modes. connected to this unit. 3 Adjust each mode During the AUX mode, "Aux Mode" will show in the display. Press the FM or AM button. When the CA-C1AX is being used, the AUX Mode will replace Please refer to the following for the adjusting values. the External Disc Control Mode. 4 Press the AUD button to end the control mode. Vol
ページ8に含まれる内容の要旨
General features Adjusting Time Spectrum Analyzer Display Selection Adjust the time. You can select the display to enjoy sounds with eyes. 1 When the time is not displayed, first press the DISP button to Switching the Preset Spectrum Analyzer Display: display the time. 1 Press the COL button for at least one second. "SPEANA CTRL" 2 Press the DISP button for at least one second to enter the is displayed once the Spectrum Analyzer Display Selection clock adjustment mode. mode is entered. 3 2 The s
ページ9に含まれる内容の要旨
NOTE Illumination Color Selection User setting You can set any colors you like, by adjusting the amount of You can select the display illumination colors. Red, Green and Blue blended into each one. Switching the illumination color: •The "#" display indicates the setting value. • The default setting is "R-1 / G-1 / B-1". 1 Press the COL button."Color CTRL" is displayed once the Illumination Color Selection mode is entered. 1 Press the COL button."Color CTRL" is displayed once the Illumination Co
ページ10に含まれる内容の要旨
General features Tuner features Panel Angle Adjustment COL SRC CRSC 4/¢ You can adjust the panel angle for easy viewing. 1 Slide the control panel by holding down the OPEN Button. 2 Each time you press the bottom of the control panel, it will MD CD RECEIVER OPEN 7 BAND EQUALIZER slide one step up (there are 4 steps in all). PWR CRSC OFF DISC AUD DISP USER FNC NAME.S FM/AM DISP/NAME.S #1~6 ST indicator AUTO indicator indicator 2CAUTION • Take care that your fingers and so on do not get caught dur
ページ11に含まれる内容の要旨
Tuning Frequency Step Setting Switch the frequency step used in seeks. The factory defaults 1 Press the SRC (source) button repeatedly to select the tuner are 50 kHz for FM and 9 kHz for AM. mode. "TUNER" is displayed when the tuner mode has been selected. 1 Turn the power off. 2 Press either the FM or AM button to select the band. 2 Hold down buttons #1 and #5, then turn the power back on. Each time you press the FM button, the band switches The frequency step settings will be changed to 200 kH
ページ12に含まれる内容の要旨
Tuner features Also, if you make no input for 10 seconds, the name will be Station Name Preset (SNPS) stored up to the point that you have entered, and the mode You can assign names to radio stations with the Station Preset ends. Memory. Up to 30 stations can be assigned names. NOTE 1 Adjust the frequency to the station whose name you want to • You can assign names to up to 30 FM/AM stations in all. enter. If you try to enter more than that, the station name stored the earliest will be the firs
ページ13に含まれる内容の要旨
CD/MD/External disc control features 4/¢ Clean Reception System Circuit (CRSC) COL MD slot SRC MD0 OPEN Temporarily have reception switched from stereo to mono to reduce multi-path noise when listening to the FM station. The indicator lights up when CRSC is off. Turning CRSC On/Off: MD CD RECEIVER OPEN Press the CRSC button for at least one second to turn the 7 BAND EQUALIZER function on/off. PWR NOTE CRSC OFF Strong electrical fields (such as from power lines) may cause unstable sound qua
ページ14に含まれる内容の要旨
CD/MD/External disc control features 2CAUTION Playing CDs Do not attempt to insert a CD into the slot if another one is Playing CDs: already there. 1 Slide the control panel by holding down the OPEN Button. NOTE 2 Insert the CD you want to play. • When you load a CD and eject it right away, the next time you try to insert the CD may not load. In such a situation, take the 3 When the CD has been taken inside, press the bottom of the CD out for a moment and then reinsert it. control panel to clos
ページ15に含まれる内容の要旨
"N"-operation: NOTE • The disc title and track title of the CD text can be displayed. When one disc has finished playing its last track, the next disc in • The disc name will be displayed when the name has been the changer will start playing. When the last disc in the changer registered to any connected unit with the Presetting Disc has finished, the player will return to the first disc and start Names function, or when the playing unit contains a disc to playing it. which the disc title has bee
ページ16に含まれる内容の要旨
CD/MD/External disc control features Fast Forwarding and Reversing Disc Play Disc Search (Function of disc changers) Search forward or backward through the discs in a disc Fast Forwarding Disc Play: changer. Hold down on the ¢ button. Release your finger to play the disc at that point. Making a Reverse Disc Search: Press the DISC– button to display the desired disc number. Reversing Disc Play: Each time the button is pressed, the displayed disc number Hold down on the 4 button. decreases by one.
ページ17に含まれる内容の要旨
Track Scan Random Play Successively play the beginning of each track on a disc until Play all the tracks on the current disc in random order. you find the track that you want to listen to. 1 Press the RDM button to switch random play on and off. Starting the Track Scan : The RDM indicator lights up when random play is turned on. Press the SCN button. The SCN indicator lights up and the first The track number will change over and over in the display as 10 seconds of each track will be played, in
ページ18に含まれる内容の要旨
CD/MD/External disc control features Magazine Random Play (Function of disc changers) Presetting Disc Names (DNPS) Play the tracks on all the discs in the disc changer in random Store the names of CDs to be displayed when played. order. 1 Play the disc whose name you want to preset. 1 Press the M.RDM button to switch magazine random play on NOTE and off. • This function is not available for disc changers that do not The M.RDM indicator lights up when magazine random play is feature the Disc Name
ページ19に含まれる内容の要旨
DSP/Graphic Equalizer features Operations can be followed again from Step 2 at a time such 4/¢ as this, and the characters to be input are selected using the procedure described below. Press the DISC+ or DISC– button to display the desired character. Besides the alphabet (capital letters only) and MD CD RECEIVER OPEN 7 BAND EQUALIZER numbers, you can choose the following characters: /, +, –, ∗, =, <, >, [ and ]. PWR 5 CRSC OFF Continue steps 3 and 4 until all the characters are chosen for the na
ページ20に含まれる内容の要旨
DSP/Graphic Equalizer features NOTE DSP (Digital Signal Processor) If you make no button operation for 10 seconds, the DSP control A DSP is a device which uses digital control to correct the audio signal and produce sound effects that can compensate mode is automatically canceled. for thesmall passenger compartment of a vehicle. The DSP indicator lights up when the DSP is on. Turning the DSP On: Graphic Equalizer Press the DSP button. This mode allows you to call up the preset equalizer curves,
