ページ1に含まれる内容の要旨
INSTALL INSTRUCTIONS C-TCB-24
1999-2006 FORD EXCURSION &
1999-2008 F-250/F-350/F-450/F-550 PICKUP
TOOLS REQUIRED:
Torx Bit Set (T-55) 3/8” Ratcheting Wrench
3/16” Allen wrench Powered drill
3/8” Standard Socket Set 3/16” & 5/16” Drill bits
3/8” Metric Socket Set Open-end wrench set
COMPONENTS & HARDWARE:
ITEM # QTY DESCRIPTION PART #
1 1 Pole Support Assembly CM93071-24
2 1 Telescoping Pole Assembly CM93072-3
3 1 Lateral Brace Arm CM93338
4 2 5/16” Hex nut GSM30007
ページ2に含まれる内容の要旨
Always! Read all instructions before installing any Havis-Shields Equipment Corp products. Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes! Use hardware provided with install kit INSTALLATION: • Remove front passenger seat bolts. Loosen but do not remove rear bolts. Telescoping Pole Assembly Note: When installing C-TCB-24 into Extended Cab or Crew Cab pick-ups, the air duck on the passenger side floor must be cut out or completely remo
