ページ1に含まれる内容の要旨
U
DVD / VIDEO CD / CD PLAYER
DVD-S540
OWNER’S MANUAL
STANDBY
/ON
ページ2に含まれる内容の要旨
WARNING To reduce the risk of fire or electric shock, do not CAUTION expose this appliance to rain or moisture. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION Use of controls or adjustments or performance of CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). procedures other than herein may result in hazardous NO USER-SERVICEABLE PARTS INSIDE. radiation exposure. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The set complies with the FCC-Rules, Part 15 and This symbol w
ページ3に含まれる内容の要旨
FCC INFORMATION (for US customers only) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installati
ページ4に含まれる内容の要旨
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 To assure the finest performance, please read 14 Do not attempt to modify or fix this unit. this manual carefully. Keep it in a safe place for Contact qualified YAMAHA service personnel future reference. when any service is needed. The cabinet should 2 Install this unit in a well ventilated, cool, dry, clean never be opened for any reason. place — away from direct sunlight, heat sources, 15 When not planning to use this unit for long vibration, du
ページ5に含まれる内容の要旨
Contents Introduction Picture CD & MP3 Playback Environmental Information......................................2 General Operation..................................................12 Supplied accessories..................................................2 MP3 & JPEG Navigator...................................................12 Notes about discs ......................................................2 Play Mode.............................................
ページ6に含まれる内容の要旨
Introduction Thank you for purchasing this unit. This Owner’s Cleaning discs Manual explains the basic operation of this unit. ● When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre out. The region code is 1 for U.S.A and Do not wipe in a circular motion. Canada models. ● Do not use solvents such as benzine, thinner, 1 commercially available cleaners, or antistatic spray Since it is usual for DVD movies to intended for analog re
ページ7に含まれる内容の要旨
Functional Overview Front and Rear Panels STANDBY/ON R/T – to turn this unit to standby mode or – search forward* / go to the next ON chapter or track Disc Tray S/Q – search backward* / go to a previous / OPEN/CLOSE chapter or track – to open/close the disc tray 9 STOP B/ ; PLAY/PAUSE – to stop playback – to start/interrupt playback STANDBY /ON * Press button for about two seconds. S-VIDEO AC Power Cord – connect to S-Video input of your AV – connect to a standard AC outlet receiver AUDI
ページ8に含まれる内容の要旨
Functional Overview Remote Control | TOP MENU/RETURN B/ – display the top-level disc menu – turn this unit ON or go to (DVD) / go back to previous standby-on mode 1 23 menu (VCD) 46 5 0-9 numeric buttons MENU – select numbered items in a 79 8 TOP MENU RETURN ON SCREEN – access menu of a disc (DVD) / menu 0 switch PBC on/off (VCD) MENU SETUP ON SCREEN 1 2 3 4 ENTER – access or remove player’s On – (left/right/up/down) select an Screen Display menu OK item in the menu SETUP STOP PAUSE ENT
ページ9に含まれる内容の要旨
Preparation Note: General Notes on connections – If the audio format of the digital output does not Never make or change connections with the match the capabilities of your receiver, the receiver power switched on. will produce a strong, distorted sound or no sound at all. Make sure to select the appropriate audio ● Depending on the equipment you wish to format at menu screen included on the disc. connect, there are various ways you could Pressing AUDIO once or more may
ページ10に含まれる内容の要旨
Preparation S-Video terminal Video Connections S (separate) video connection achieves a clearer If your AV receiver has video output jacks, picture than composite video connection by connect your receiver (and then to your TV) so separating color and luminance when transmitting that you can use one TV for several different signals. Use commercially available S-video cable. video sources (LD, VCR etc.) by simply switching Receiver (and TV) with S-video input is required. th
ページ11に含まれる内容の要旨
Preparation Inserting batteries into the NTSC/PAL Conversion Remote Control This player is equipped with a NTSC/PAL conversion feature to convert the video output of 1 Open the battery cover by pressing in the tab, the disc to match your TV system. The then lift off the cover. conversions supported are as below. To activate 2 Insert batteries with the correct polarity as the conversion, refer to “TV Type”: indicated by the + and - symbols inside the battery compartment. Disc Ou
ページ12に含まれる内容の要旨
Operation 3 To go directly to any chapter/track, enter the Basic Playback chapter/track number using the numeric buttons 1 Press STANDBY/ON on the front panel to turn and press ENTER/OK. on the DVD player. Note: Long press of the ¡1 or 2™ till switch on 2 Press / (OPEN/CLOSE) on the front panel to backward or forward search. open disc loading tray. D DV VD D VCD VCD CD CD SVCD SVCD 3 Place the chosen disc in the tray, with the label SEARCH facing up. 1 To search the contents in fast speed,
ページ13に含まれる内容の要旨
Operation ➜ Mono Right: Output the right audio channels OSD (On-Screen Display) of the disc through the left and right audio jacks. This function will provide some information about ➜ MIX-Mono: each of the audio jacks can output your playing disc on the screen. the same audio effect as stereo. ● Press ON SCREEN. The Status window appears on the TV. Repeat and Shuffle D DV VD D VCD VCD Title/Chapter/Track selection D DV VD D 1 Press 34 to select “Title” or “Chapter” (DVD) or “Track” (VCD).
ページ14に含まれる内容の要旨
Operation D DV VD D VCD VCD SVCD SVCD Zoom Changing the Audio Language and/or D DV VD D format The Zoom function allows you to change the image size. ● Press AUDIO repeatedly to select the different 1 Press ZOOM to activate the function. languages. ➜ Use 341 2 to view other parts of the Note: The function will be activated only if the DVD zoomed picture. is recorded with multi-language audio tracks. ➜ Playback will continue. 2 Press ZOOM repeatedly to return to the original DV DVD D SVC
ページ15に含まれる内容の要旨
Operation 2 Disc Interval Preview Function This function is used to divide a disc into six parts ● Press SCAN to enter previewing menu. by regular intervals and display them on one page ● Press 34 to highlight Track Digest, Disc Interval to help you preview the whole disc. or Track Interval. ● Press ENTER/OK to open one option. ● After you enter the menu of any digest type, ➜ To quit preview function: Press 341 2 to - To choose the desired track, press 341 2 to highlight EXIT and press ENT
ページ16に含まれる内容の要旨
Picture CD & MP3 Playback This player can playback JPEG format pictures and Play Mode MP3 files on a personally recorded CD-R/RW Auto Playback disc or commercial CD, and is compatible with If you choose WITHOUT MENU, the DVD Kodak Picture CD. player will automatically playback Picture CD/MP3 ● Playback pictures or songs one by one CD in sequence when it is loaded. automatically. ● Album and track selection. Repeat / Shuffle ● Repeat (disc / album / track / picture). ● When the Picture CD/M
ページ17に含まれる内容の要旨
Picture CD & MP3 Playback Playback with multi-angles Special JPEG Features When displaying one picture on TV screen ● Press 341 2 to get different effects. Function Introduction 3: Flip the picture vertically. Picture CD is a disc with a collection of JPEG 4: Flip the picture horizontally. format pictures, and all extension filenames 1: rotate the picture anti-clockwise. should end with ‘JPG’. The CD can be recorded 2: rotate the picture clockwise. on any computer, and pictures may be from di
ページ18に含まれる内容の要旨
Setup Menu Program (not for Picture CD/MP3) Basic Operation 1 press 34 to choose “Program”. 1 Press SETUP in the STOP mode to enter the 2 Press 2 to move the cursor to the field of the Setup Menu. submenu to choose the item Input menu. 2 Press ENTER/OK to go to the next level submenu ➜ Input menu: Enter the Program item. or confirm your selection. 3 Press ENTER/OK to enter the program page. 3 Press 1 2 to enter the submenu or return to the previous menu. 4 Press 34 to highlight the desired
ページ19に含まれる内容の要旨
Setup Menu Repeat the program playback Audio Setup menu ● During playback of the programmed tracks, press There are items included in Audio Setup Page REPEAT. The programed tracks can be played such as “Speaker Setup”, “Digital Audio Setup”, again. “Equalizer” and “3D”. Note: If you select Shuffle mode by pressing REPEAT several times, the DVD player cancels program playback. OSD language This option is to select a language for information displayed on TV screen. 1 Press 34 to highlight “
ページ20に含まれる内容の要旨
Setup Menu Digital Audio Setup Equalizer (Sound Mode) In this menu, you can set up the digital audio The “Equalizer” allow you to select from various output signal from the digital jacks, such as coaxial preset modes that control the frequency bands of etc. sound to optimize certain musical styles. It greatly enhances the excitement and enjoyment Digital Output of your favourite music. 1 Press 34 to highlight Digital Output. 1 Press 34 to highlight the “Equalizer”. 2 Enter its submenu by press
