ページ1に含まれる内容の要旨
SD4300KU
Owner’s Record
The model number and serial number are on the back
of your DVD Player. Record these numbers in the spaces
below Refer to these numbers whenever you
communicate with your Toshiba dealer about this DVD
Player.
Model number:
Serial number:
ページ2に含まれる内容の要旨
English Introduction SAFETY PRECAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated 'dangerous voltage' within the product' s enclosure that may be of sufficient magnitude to constitute a risk of CAUTION: VISIBLE LASER RADIATION WHEN electric shock to persons. OPEN. DO NOT STARE INTO BEAM. The exclamation point within an equila- teral triangle is intended to alert the user to the presence of imp
ページ3に含まれる内容の要旨
Introduction 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience rec
ページ4に含まれる内容の要旨
English Introduction CAUTION! WARNING: Do not use solvents such as benzene, thinner, RISK OF ELECTRIC SHOCK! commercially available cleaners, or anti-static sprays intended for analog discs. Since the optical unit Never attempt to service this product yourself. (laser) of the DVD system operates at a higher Opening and removing the covers may expose you power than regular DVD or CD players, cleaning to dangerous voltage or other hazards. Failure to
ページ5に含まれる内容の要旨
Introduction Discs that can Region be played U.S.A. and Canada regions ALL 1 U.K., Europe regions and ALL 2 Japan Asia Pacifi c, Taiwan, Korea ALL 3 Australia, New Zealand, ALL 4 Latin America Russia and India regions ALL 5 China, Calcos Islands, Walls and Futuna ALL 6 Islands This product incorporates copyright protection tech- nology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights ow
ページ6に含まれる内容の要旨
English Introduction Table of Contents Introduction SAFETY PRECAUTIONS 1 IMPORTANT SAFETY INSTRUCTIONS 1-2 Setup 3 Cleaning discs 3 Moisture Condensation 3 Region Codes 3-4 Table of Contents 5 Connections Connecting to television 6 Connecting to a Stereo System 7 Connecting to a Digital AV Receiver 7 Connecting the power cord 8 Product Overview Front and Rear panels 9 Remote Control 10 Getting Started Inserting Batteri
ページ7に含まれる内容の要旨
Connections corresponding Component video input jacks (or labeled as Y, Pb, Pr) on the TV (cable not supplied). Connecting to television B Use the audio cables (white/red) to connect AUDIO OUT (L/R) jacks of the DVD player to the corresponding AUDIO IN jacks on the TV (cable not IMPORTANT! supplied). – You only need to make one video connection C Proceed to page 11 for detailed Progressive Scan set from the following options, depending on the up. capabilities of your television. –
ページ8に含まれる内容の要旨
English MAINS Connections Connecting to a Stereo System Connecting to a Digital AV Receiver Receiver has a PCM, Dolby Digital or MPEG Stereo System with Left/Right Audio In Jacks decoder A Select one of the video connections (CVBS VIDEO A Select one of the video connections (CVBS VIDEO IN IN or COMPONENT VIDEO IN) or COMPONENT VIDEO IN) depending on the options available on your TV. depending on the options available on your TV. B Use the audio cables (white/red) to connect AU
ページ9に含まれる内容の要旨
Connections Connecting the power cord After everything is connected properly, plug in the AC power cord to the power outlet. Never make or change any connections with the power switched on. Helpful hint: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet. English
ページ10に含まれる内容の要旨
English Product Overview Front and Rear panels I/2 ON/STANDBY -Turns the player on or switches it to Disc tray standby mode - Place a disc here B/X PLAY/ PAUSE -Starts or pauses playback çOPEN/CLOSE - Opens or closes the disc tray STOP - Stops playback IR Sensor - Points the remote control towards this sensor Display - Shows information about the current status of the DVD Player MAINS ~ - Connects to a standard AC outlet AUDIO OUT (Left/Right) - Connects
ページ11に含まれる内容の要旨
Product Overview Remote Control See the page in [ ] for details. [ 15 ]DISPLAY REMOTE SIGNAL EMITTER -Displays information on [ 11 ] TV screen during playback -Point remote control to the sensor on the front panel 2 [ 11, 13 ] [ 13 ]OPEN/CLOSE ON / STANDBY -Open/close the disc tray -To switch the DVD player to ON or standby mode [ 13, 15, 20 ]Number Buttons -Selects numbered items in a menu [ 15 ] T - SEARCH -Press to enter track/chapter/title -Start playback from a designated numbers
ページ12に含まれる内容の要旨
English Getting Started and highest channels and may be called FRONT, A/V IN or VIDEO. See your TV' s manual for more Inserting Batteries details. Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until you see the Video In channel. Or, the TV remote control may have a button that chooses different video modes. Or, set the TV to channel 3 or 4 if you are using an RF modulator. C If you are using external equipment, (such as audio system or re
ページ13に含まれる内容の要旨
Getting Started/Playback from disc G Press to highlight { Yes } and press OK to confirm. on the disc, the disc’s default language will be used instead. The reconfirmation menu will appear on the TV. Video Out OSD language : English Language Subtitle : Off Confirm again to use new setting Video 14 Seconds Audio English DVD Menu French Audio Spanish Yes No Rating H Press to highlight { Yes } and press OK to confirm. Misc Th
ページ14に含まれる内容の要旨
English Playback from disc/Playback Feature – For DVD+R andDVD+R Wmulti border ,both Video CD finalized and unfinalized disc cannot be supported. (Formats 1.0, 1.1, 2.0) Starting disc playback Super Video CD A Turn on the TV and select the video input connected MP3-Disc to the DVD player. B Press 2ON/STANDBY to turn on the DVD player. is a trademark of DVD Format/Logo Licensing C Press OPEN/CLOSE to open the disc tray. Corporation. D Place a disc onto the disc tray with t
ページ15に含まれる内容の要旨
Playback Feature Stopping playback ybac Operations for video playback (DVD/ VCD/SVCD) A During playback, press STOP . The DVD player memorises the stopped point. Press PLAY/ PAUSE to resume playback from the Using the disc menu location where you stopped playback. If you press STOP again, the DVD player will Depending on the disc, a menu may appear on the cancel the resume function. TV screen once you load in the disc. Tips: To select a playback feature or item -Screensave
ページ16に含まれる内容の要旨
English Playback Feature For MP3, JPEG B Use the number buttons ( 0-9 ) to input a valid -Repeat Single (currently playing file) number or time ("0" cannot be input as the first -Repeat All (current folder) number). (This function only apply to DVD/VCD/CD/ SVCD.) -Off (cancel) C Press OK to confirm. Tip: The playback skips to the selected title/chapter/ -ForVCD2.0/SVCD discs, repeatplayback is not track/time. possible if the PBC mode isturned on. Angle Repeating a s
ページ17に含まれる内容の要旨
Playback Feature C Select Add To Program in the toolkit then press OK. ' √ ' will disappear from screen. It means that the Playing MP3/JPEG/ Kodak picture CD files/tracks you have selected already added into the Program View list. D Select Program View in the toolkit then press OK to IMPORTANT! open the file/track in the Program View list that you You have to turn on your TV and set to already selected in step B. the correct Video In channel. (See page E Press PLAY / PAUSE to play
ページ18に含まれる内容の要旨
English Playback Feature/DVD Menu Options Press PREV / NEXT to view the previous -SomeDVD video discs allow you to change subtitle or next thumbnail screen. selections only viathe disc menu. If this is thecase, press the MENU button andchoose the appropriate Zoom picture ( JPEG) subtitle languagefrom the selection onthe disc During playback, press ZOOM repeatedly to menu. display the picture with different scales. -SomeD
ページ19に含まれる内容の要旨
DVD Menu Options { Fill } 0 Brightness Fill the screen with decoded image. 0 Contrast { Original } 0 Tint Display image as its original size. 0 Color { Height Fit } Close Fit the screen height with image height. D Press / to
ページ20に含まれる内容の要旨
English DVD Menu Options is down sampled to 48 KHz. Example: { Night Mode } B Use / to select a setting and press OK to The options for the selected item appears. confirm. If the selection in the menu is greyed out, that Tip: means the feature is not available or not possible to - Whenplaying back disc with copyright protection, change at the current state. the sound will be down sampled to 48 KHz even D Use / to select a setting and press OK to whenyou select
