ページ1に含まれる内容の要旨
SD390EKB
ページ2に含まれる内容の要旨
English Introduction SAFETY PRECAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated 'dangerous voltage' within the product' s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: VISIBLE LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM. The exclamation point within an equila- teral triangle is intended to alert the user to the presence of imp
ページ3に含まれる内容の要旨
Introduction 18. Do not use a cracked , deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and apparatus malfunction. 19. If the apparatus should smoke or smell, immediately disconnect the power cord from the wall outlet. Wait until the smoke or smell stops, then ask your dealer for a check and repair. Neglecting to do so may cause fire. 20. While it is thundering, do not touch the connecting cables or the apparatus. SOME DOS AND DON'TS ON THE SAFE
ページ4に含まれる内容の要旨
English Introduction CAUTION: This Digital Video Disc Player employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference Should the unit require maintenance, contact an authorized service location. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Vis
ページ5に含まれる内容の要旨
Introduction CAUTION! WARNING: Do not use solvents such as benzene, thinner, RISK OF ELECTRIC SHOCK! commercially available cleaners, or anti-static sprays intended for analog discs. Since the optical unit Never attempt to service this product yourself. (laser) of the DVD system operates at a higher Opening and removing the covers may expose you power than regular DVD or CD players, cleaning to dangerous voltage or other hazards. Failure to CDs in
ページ6に含まれる内容の要旨
English Introduction Discs that can Region be played U.S.A. and Canada regions ALL 1 U.K., Europe regions and EU Conformity Statement ALL 2 Japan “This product is marked with “CE” and complies therefore Asia Pacifi c, with the applicable harmonized European standards Taiwan, Korea listed under the Low Voltage Directive 2006/95/EC and ALL 3 the EMC Directive 2004/108/EC.” Responsible for CE-marking is TOSHIBA INFORMATION Australia, SYSTEMS (U.K.) LTD, Toshiba Court, Weybridge New
ページ7に含まれる内容の要旨
Introduction Table of Contents Introduction SAFETY PRECAUTIONS 1 IMPORTANT SAFETY INSTRUCTIONS 1-3 Setup 4 Cleaning discs 4 Moisture Condensation 4 Region Codes 4-5 Table of Contents 6 Connections Connecting to television 7-8 Connecting to a Stereo System 8 Connecting to a Digital AV Receiver 9 Connecting the power cord 9 Product Overview Front and Rear panels 10 Remote Control 11 Getting Started Inserting Batteries
ページ8に含まれる内容の要旨
English Connections corresponding AUDIO IN jacks on the TV(cable not supplied). Connecting to television TM Using HDMI cable IMPORTANT! – You only need to make one video connection from the following options, depending on the HDTV / DVI TV capabilities of your television. – Connect the DVD player directly to the HDMI IN television. HDMI IN Using SCART socket IMPORTANT! – A simple 1-cable connection with a device having an HDMI( high definition multimedia interface ) conn
ページ9に含まれる内容の要旨
Connections Using a RF modulator Connecting to a Stereo System IMPORTANT! -If your TV only has a single Antenna In jack (or labelled as 75 ohm or RF In), you will need an RF modulator in order to view the DVD playback on Stereo system has Dolby Pro Logic or Right/Left the TV. Audio In Jacks A Use the composite video cable (yellow) to connect the DVD player' s VIDEO (CVBS) jack to the video A Select one of the video connections (CVBS VIDEO input jack on the RF modulator (cabl
ページ10に含まれる内容の要旨
English Connections Connecting the power cord Connecting to a Digital AV Receiver (Illustration of SD390EKB) After everything is connected properly, plug in the AC power cord to the power outlet. Never make or change any connections with the power switched on. Receiver has a PCM, Dolby Digital or MPEG decoder A Select one of the video connections (CVBS VIDEO IN, SCART IN or HDMI IN) depending on the options available on your TV. B Conne
ページ11に含まれる内容の要旨
Product Overview Front and Rear panels I/2 ON/STANDBY - Turns the player on or switches it to standby mode B/X PLAY/ PAUSE Disc tray - Starts or pauses playback - Place a disc here STOP IR Sensor - Stops playback - Points the remote control towards this sensor Display çOPEN/CLOSE - Shows information about the current status of the - Opens or closes the disc tray DVD Player MAINS ~ SCART OUT - Connects to a standard AC outlet - Connects to SCART input of a T
ページ12に含まれる内容の要旨
English Product Overview Remote Control See the page in [ ] for details. [ 15 ]DISPLAY REMOTE SIGNAL EMITTER -Displays information on [ 12 ] TV screen during playback -Point remote control to the sensor on the front panel 2 [ 12, 13 ] [ 13 ]OPEN/CLOSE ON / STANDBY -Open/close the disc tray -To switch the DVD player to ON or standby mode [ 14, 15, 20 ]Number Buttons -Selects numbered items in a menu [ 15 ] T - SEARCH -Press to enter track/chapter/title -Start playback from a designated
ページ13に含まれる内容の要旨
Getting Started and highest channels and may be called FRONT, A/V IN or VIDEO. See your TV' s manual for more Inserting Batteries details. Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until you see the Video In channel. Or, the TV remote control may have a button that chooses different video modes. Or, tune the TV until you can see the DVD player signal from the RF modulator (refer to your TV user manual). C If you are using external equ
ページ14に含まれる内容の要旨
English Getting Started/Playback from disc { Subtitle } This DVD player requires discs/recordings to meet Select this to change the subtitle language. certain technical standards in order to achieve { Audio } optimal playback quality. There are many different Select this to change the disc soundtrack language. types of recordable disc formats (including CD-R { DVD Menu } containing MP3 files). Not all recordable discs will Select this to change the language of the disc menu. operate o
ページ15に含まれる内容の要旨
Playback from disc/Playback Feature password, see page 20. Program For more playback features, see pages 14 - 17. 1 2 Track 1 3 4 Tips: Track 2 5 6 - Do not overturn the DVD player while disc loading, 7 8 Track 3 9 10 playing or ejecting. Track 4 11 12 - Do not close the disc tray manually even if the Track 5 13 14 Track 6 power is switched off. 15 16 Play Clear Clear All Basic playback control For DVD: Unless otherwise stated, all operations described are Program based on Remot
ページ16に含まれる内容の要旨
English Playback Feature Time B To return to normal speed, press PLAY/ PAUSE . Time 00：03：33/01：24：46 (DVD) Forward/ Reverse Searching Title Title 1/1 (DVD) Chapter You can fast forward or fast reverse a disc during Chapter 2/8 (DVD) playback and select a desired search speed. Audio For DVD,VCD, SVCD,CD, MP3 Audio 1/1 6Ch Eng (DVD) A During playback, press F.R/ F.F to select the required Subtitle speed: X2, X8, X30, X100(backward or forward). Subtitle 1
ページ17に含まれる内容の要旨
Playback Feature B Press / to select the folder and press OK to Changing the Audio Language open the folder. For DVD： C Press / to select a track/file. Press AUDIO repeatedly to select different audio D Press OK to confirm. languages. Tips: Changing the Audio Channel - If you highlight on a jpeg file, a preview will appear. For VCD： - During MP3 playback, the LED will display the track Press AUDIO to select the available audio channels number. provided by the disc (Left,
ページ18に含まれる内容の要旨
English Playback Feature tracks on the disc. This DVD Player setup is carried out via the TV, Mode(Normal/Random) enabling you to customise the DVD player to suit This mode can also be toggled by using RANDOM your particular requirement. button. Normal: Resumes normal playback Random: Playbacks track/file in random order. ® During MP3/CD-DA/JPEG /DivX files playback; Using the Language setup menu - If Repeat All and Random are selected, all the tracks will be played random
ページ19に含まれる内容の要旨
DVD Menu Options B Use / to select a setting and press OK to confirm. Using the Video setup menu Tip: -Depending on the type of disc, you may not be able A Press SETUP on the remote control. to view the mode as selected. The system setup menu appears. TV System Language 4:3 The video standard of the DVD player output can be Aspect Ratio Aspect Ratio Aspect Ratio : : : 4:3 4:3 V V Viiiew Mode ew Mode
ページ20に含まれる内容の要旨
English DVD Menu Options 0 Brightness 0 Using the Audio setup menu Contrast 0 Tint 0 Color A Press SETUP on the remote control. Close The system setup menu appears. Language Digital Output : PCM D Press / to highlight one
