ページ1に含まれる内容の要旨
SD-860
ページ2に含まれる内容の要旨
Introduction READ THIS BEFORE OPERATING YOUR UNIT This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. : TO REDUCE THE RISK OF CAUTION ELECTRIC SHOCK, DO NOT This symbol is intended to alert the user to the REMOVE COVER (OR BACK). NO presence of important operating and USER-SERVICEABLE PARTS maintenance (servicing) instructions in the INSID
ページ3に含まれる内容の要旨
SAFETY INSTRUCTIONS 1. Read Instructions - All the safety and operating instructions should Figure 1 be read before the product is operated. Example of antenna grounding as per National Electrical Code, ANSI/NFPA 70 2. Retain instructions - The safety and operating instructions should ANTENNA LEAD IN WIRE be retained for future reference. 3. Heed Warnings - All warnings on the product and in the operating GROUND CLAMP instructions should be adhered to. 4. Follow Instructions - All operating and
ページ4に含まれる内容の要旨
FOR YOUR SAFETY Units shipped to the U.S.A and Canada are designed for operation on 120 V AC only. Safety precaution with use of a polarized AC plug. However, some products may be supplied with a nonpolarized plug. U.S.A : To prevent electric shock, match wide blade of plug to wide slot, fully CAUTION and 120 V insert. CANADA : Pour éviter chocs électriques, introduire la lame la plus large de la fiche ATTENTION dans la borne correspondante de la prise et pousser jusqu’ au fond. The available po
ページ5に含まれる内容の要旨
CONTENTS • Introduction READ THIS BEFORE OPERATING YOUR UNIT | 2 • System Connections CONNECTING TO A/V AMPLIFIER OR RECEIVER | 6 CONNECTING TO TV WITH AUDIO AND VIDEO INS | 9 CONNECTING TO TV WITH SCART CONNECTOR(Regional Option) | 9 • Front Panel & Remote Controls | 10 REMOTE CONTROL OPERATION RANGE | 11 LOADING BATTERIES | 11 • Preliminary Knowledge About Discs PLAYABLE DISC TYPES | 12 REGION CODE | 12 NOTES ON COPYRIGHT | 12 SYMBOL ABOUT I
ページ6に含まれる内容の要旨
System Connections • Do not connect the AC input cord into the AC outlet when plugging and unplugging connection cords. • Since different components often have different terminal names, carefully read the operating instructions of the component connected. • Be sure to observe the color coding when connecting audio and video cords. • The supplied cords are a (stereo) audio cord, a composite video cord, a system control cord and a power cord. Other cords are commercially-available cords. CONNECTIN
ページ7に含まれる内容の要旨
1. Connecting 5.1CH AUDIO OUTPUTs • When your amplifier/receiver is not compatible with the • To fully enjoy the multichannel audio of DVD Audio and digital signals that are output from this unit, loud noise or no SACD as well as Dolby Digital and DTS soundtracks of sound may be heard from the speakers, and it may be DVD Video, etc., connect these jacks to the corresponding harmful to your ears and damages the speakers. To channel input jacks of your amplifier/receiver. prevent it, you should se
ページ8に含まれる内容の要旨
4. Connecting COMPOSITE VIDEO OUTPUTs 1, 2 7. Connecting DIGI-LINK jack • Connect this jack to the (composite)VIDEO input jack of • Connect this jack to the DIGI LINK jack of the external your amplifier/receiver or TV. Sherwood component that uses the DIGI LINK II or III • The same signal is output from COMPOSITE VIDEO remote control system. OUTPUT 1 and 2 jacks, enabling connection to two devices(e, g., an A/V amplifier and additional TV) Sherwood component simultaneously. with DIGI LINK II or
ページ9に含まれる内容の要旨
CONNECTING TO TV WITH AUDIO AND VIDEO INS • You can enjoy DVD Videos by simply connecting this unit to a TV. To hear improved audio sound quality, connect the 2CH AUDIO OUTPUTs to the AUDIO INs of DVD(, AUX, CD, etc.) of your amplifier/receiver. • To connect these jacks correctly, refer to “Connecting 2CH AUDIO OUTPUTs” on page 7, “Connecting COMPOSITE VIDEO OUTPUTs 1, 2” and so forth on page 8. Notes: • If your TV has a monaural audio input instead of stereo, you need to use an optional audio c
ページ10に含まれる内容の要旨
Front Panel & Remote Controls Front Panel Controls 1. POWER switch 2. STANDBY indicator 3. FORWARD/BACKWARD SKIP ( / ) buttons 4. STOP( ) button 5. PAUSE/STEP( ) button 6. PLAY( ) button 7. OPEN/CLOSE( ) button 8. DISC TRAY 9. SACD indicator 10. DVD AUDIO indicator 11. PURE AUDIO indicator 12. REMOTE SENSOR 13. FLUORESCENT DISPLAY • For details, see next page. Remote Controls 1. POWER ON button 2. STANDBY button 3. OPEN/CLOSE( ) button 4. DIMMER button 5. DISPLAY button 6. NTSC/PAL
ページ11に含まれる内容の要旨
Fluorescent Display PLAY Indicator SOUND RECORDING SYSTEM PURE AUDIO indicators indicators DISC TYPE VIDEO FILE TYPE SOUND RECORDING SYSTEM indicators PROGRESSIVE indicator indicators indicators PAUSE indicator REMAIN indicator Group/title number, RANDOM indicator ANGLE indicator track/chapter number, PROGRAM indicator AUDIO FILE TYPE indicators REPEAT indicators playin
ページ12に含まれる内容の要旨
Preliminary Knowledge About Discs PLAYABLE DISC TYPES REGION CODE This unit supports the following discs. • DVD players and DVD Videos have their own Region Code numbers which are assigned to each country or area as Disc Logo Format or file type shown below. DVD players are set to your Region Code number at the factory. As a result, if the region code number of this DVD player is different from that of the DVD DVD Video DVD Video Video, playback of the DVD Video w
ページ13に含まれる内容の要旨
AUDIO AND VIDEO FILES CARE AND HANDLING OF DISCS • Folder and file names are displayed up to 11 characters. • In handling a disc, hold it carefully • Characters except “A~Z”, “0~9”, “ - ” may be not displayed. with edges. • The playback order of folders and files shown in the menu may differ from the order shown in a PC. • This unit supports multi-session discs. Some multi-session discs may take a long time to load and some may not be loaded at all. • Do not stick paper or write anything on the
ページ14に含まれる内容の要旨
Operations Before starting playback • Make the initial settings to suit your usage conditions the very first time this unit is turned on.(For details, refer to “Initial Settings” on page 30) • For explanation purposes, this instructions explains the OSD(On-Screen Display) language displayed on TV in English. • Usable discs for each operation/ function are referred to by the icons; BASIC PLAYBACK Preparations • Turn on the TV and select the video input source connected to the unit. • When you w
ページ15に含まれる内容の要旨
• When you load a MP3, WMA, JPEG, DivX disc or a DVD that contains a menu, the menu display may appear on the TV screen. In this case, see “To start playback from the menu of DVD” below or “To start playback from the menu of MP3, WMA, JPEG or DivX disc” on the next page. • Example of DVD Video • Example of MP3 disc TITLE MENU SMART NAVI Dogs Cats ROOT ROOT 0 POPS 1 Cows Horses BLUES 2 Folder and file menu Root menu HAPPY 3 SO LONG 4 CLASSIC 5 LI
ページ16に含まれる内容の要旨
To start playback from the menu of MP3, WMA, JPEG or DivX disc In the stop mode, press the CURSOR / buttons to select the folder and file menu. 1 RC Press the CURSOR / buttons to select the preferred folder or file then press the ENTER button. 2 RC RC • When selecting the preferred file, playback starts from the selected file. • When selecting the preferred folder, the file menu screen of the selected folder is displayed. In this case, repeat this step to select the preferred file in its fi
ページ17に含まれる内容の要旨
To stop playback • When playback of a DVD is stopped, the unit memorizes Main unit RC the point where the STOP( ) button was pressed(RESUME function: DVD only). (“RESUME” is displayed on the unit’s display when this or function is activated.) • Press the PLAY( ) button again, and playback will resume from this point. When the STOP( ) button is pressed again, the RESUME function will be canceled and it enters stop mode.(“STOP” is displayed.) • During playback of a DVD, when the unit is turned
ページ18に含まれる内容の要旨
To skip ahead or back during playback • To skip ahead • To skip back • Each time the button is pressed, a chapter/track/file is skipped. • In case of DVD, SACD and CD, when the BACKWARD SKIP button is pressed once midway through a Main unit RC Main unit RC chapter/track, playback returns to the beginning of that chapter/track. When it is pressed again, a chapter/ track is skipped. or or • You can select a chapter/track/file directly with pressing the NUMERIC buttons on t
ページ19に含まれる内容の要旨
Bonus group playback • Some DVD Audios contain an extra bonus group that requires a 4-digit password to access.(For details on 4-digit password, see the disc’s sleeve notes.) During playback, select the bonus group. 1 • Then password input screen is displayed. RC • Depending on DVD Audios, you can select the bonus group on the title or DVD menu, too. • Depending on the disc, the bonus group operation may BONUS GROUP INPUT PW: vary. Input the 4-digit password with pressing the NUMERIC buttons. Ex
ページ20に含まれる内容の要旨
DISPLAYING DISC INFORMATION DURING PLAYBACK • The unit features the on-screen display function showing disc information. • Press the DISPLAY button. RC • Then the disc information is displayed on the TV screen. • Each time this button is pressed, the disc information is changed depending on the disc types as follows : TITLE 01/07 CHAPTER 001/012 : Elapsed time of TRACK ELAPSED : Title/chapter number 00:22 the track or group/track number Total title/group number
