ページ1に含まれる内容の要旨
DVD-H1080
DVD-H1080R
DVD-H1080W
DVD Player
user manual
imagine the possibilities
Thanks you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/global/register
AK68-01754K(02)
ページ2に含まれる内容の要旨
precautions - When condensation forms inside 1. Setting up the player due to sharp changes in - Refer to the identification label located temperature, the player may not operate on the rear of your player for its proper correctly. If this occurs, leave the player operating voltage. at room temperature until the inside of the - Install your player in a cabinet with player becomes dry and operational.
ページ3に含まれる内容の要旨
before you start table of content Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Accessories Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Setup General Features . . . . . . . . . . . . . . . . . . . . . . . . . .4 Disc Type and Characteristics . . . . . . . . . . . . . . . .5 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Batteries for Remote Tour of the Remote Control . . . . . . . . . . . . . . . . . . .7 R
ページ4に含まれる内容の要旨
setup Note General Features - Discs which cannot be played with this player. Excellent Sound • DVD-ROM • DVD-RAM Dolby Digital, a technology developed by Dolby • CD-ROM • CDV Laboratories, provides crystal clear sound reproduc - • CDI • CVD tion. • CDGs play audio only, not graphics. Screen Both regular and widescreen(16:9) pictures can be - Ability to play back may depend on recording viewed. conditions. Slow Motion • DVD-R, +R
ページ5に含まれる内容の要旨
● setup Disc Type and Characteristics This DVD player is capable of playing the following types of discs with the corresponding logos: Disc Types Recording Disc Max. Playing Time Characteristic (Logos) Types Size DVD Single-sided 240 min. - DVD contains excellent sound and video due to 12 Cm Audio Double-sided 480 min Dolby Digital and MPEG-2 system. + - Various screen and audio functions can be easi- Video Single-sided 80 min. 8 Cm ly selected thr
ページ6に含まれる内容の要旨
setup Description Front Panel Controls 4. OPEN/CLOSE/Stop ( ) 1. STANDBY/ON ( ) Press to open and close the disc tray, Stops disc play. When STANDBY/ON is pressed on, the indicator goes 5. PLAY/PAUSE ( ) out and the player is turned on. Begin or pause disc play. 2. STANDBY Indicator When the unit is first plugged in, the indicator lights. 3. DISC TRAY Place the disc here. Rear Panel 1. DIGITAL AUDIO OUT JACKS 4. VIDEO OUT JACK - Use coaxial
ページ7に含まれる内容の要旨
● setup Note - Consult your TV User’s Manual to find out if your TV supports Progressive Scan (P-SCAN). If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system. - The HDMI output of this unit can be connected to a DVI jack on a TV or other device using a conver- sion adapter. In this case, it is necessary to use a TV or display with an HDCP-compatible DVI i
ページ8に含まれる内容の要旨
connections Choosing a Connection The following shows examples of connections commonly used to connect the DVD player with a TV and other components. Before Connecting the DVD Player - Always turn off the DVD player, TV, and other components before you connect or disconnect any cables. - Refer to the user’s manual of the additional components you are connecting for more information on those particular components. Connecting to a TV (VIDEO CVB
ページ9に含まれる内容の要旨
● ConneCtions Connection to a TV (Interlace) - Connecting to your TV using Component video cables. - You will enjoy high quality and accurate color reproduction images. Component video separates the pic- ture element into black and white(Y), blue(P ), red(P ) signals to present clear and clean images. (Audio B R signals are delivered through the audio output.) 1 Using component video cables (not included), connect the COMPONENT VIDEO OUT ter
ページ10に含まれる内容の要旨
connections Connection to a TV (Progressive) 1 Using component video cables (not included), connect the COMPONENT VIDEO OUT terminal on the rear of the DVD player to the COMPONENT IN terminal of TV. 2 Using the audio cables, connect the AUDIO (red and RED BLUE GREEN white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of TV. Turn on the DVD player and TV. RED WHITE 3 Press the input selector on your T
ページ11に含まれる内容の要旨
● ConneCtions Connecting to a TV with DVI Jack 1 Using an HDMI-DVI cable (not included), connect the HDMI OUT terminal on the rear of the DVD player to the DVI IN terminal of your TV. 2 Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the RED WHITE AUDIO (red and white) IN terminals of your TV. Audio Cable Turn on the DVD player and TV. RED WHITE HDMI-DVI cable 3 Press the input selecto
ページ12に含まれる内容の要旨
connections • HDMI (High Definition Multimedia Interface) • Why does Samsung use HDMI? Analog TVs require an analog video/audio signal. HDMI is an interface to enable the digital transmission However, when playing a DVD, the data transmitted of video and audio data with just a single connector. to a TV is digital. Therefore either a digital-to-analog Using HDMI, the DVD player transmits a digital video converter (in the DVD player) or an
ページ13に含まれる内容の要旨
● ConneCtions Connection to an Audio System (2 Channel Amplifier) 1 Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of the Amplifier. 2 Using the video signal cable(s), connect the VIDEO or COMPONENT OUT terminals on the rear of the DVD player to the VIDEO or COMPONENT IN terminal of your TV as described on pages 8 to 11. 3 WHITE RED Turn on th
ページ14に含まれる内容の要旨
connections Connection to an Audio System (Dolby Digital, MPEG2 or DTS Amplifier) 1 If using a coaxial cable (not included), connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier. 2 Using the video signal cable(s), connect the VIDEO, COMPONENT or HDMI OUT terminals on the rear of the DVD player to the VIDEO, COMPONENT or DVI IN termi- nals of your TV as descri
ページ15に含まれる内容の要旨
● basi C funCtions basic functions 4. Stopping Play Playing a Disc Press the STOP ( ) button during play. Before Play 5. Removing Disc - Turn on your TV and set it to the correct Video Press the OPEN/CLOSE ( ) button. Input by pressing TV/VIDEO button on the TV 6. Pausing Play remote control. Press the PAUSE ( ) button on the remote control during play. - If you connected an external Audio System, turn - Screen stops, no
ページ16に含まれる内容の要旨
basic functions Using the Search and Skip Using the Display Function Functions When Playing a DVD/MPEG4 During play, you can search quickly through a chapter or 1. During play, press the INFO button on the remote control. track, and use the skip function to jump to the next selection. 2. Press the π/† buttons to select the desired item. 3. Press the √/® buttons to make the desired setup and then Searching through a Chapter or press the E
ページ17に含まれる内容の要旨
● basiC funCtions Using the Disc and Title Disc Menu Using the Disc Menu Off 1. During the playback of a DVD disc, press the DISC MENU button on the remote control. Using the A-B Repeat function 2. Press the π/† buttons for navigation/change selection, 1. Press the REPEAT A-B button on the remote control at then-press ENTER button. the point where you want repeat play to start (A). 3. To make the screen disappear, press the RETURN or DISC
ページ18に含まれる内容の要旨
advanced functions If you are using a 4:3 TV Adjusting the Aspect Ratio (EZ View) For 16:9 aspect ratio discs - 4:3 Letter Box To play back using aspect ratio Displays the content of the DVD title in 16:9 aspect ratio. (DVD) The black bars will appear at the top and bottom of the screen. 1. During play, press the INFO button on the remote control. - 4:3 Pan Scan E 2. Press the π/† buttons to select Z icon. Press the √/® The left and
ページ19に含まれる内容の要旨
● advanCed funCtions Press √/AUDIO button Note MPEG4 at remote control repeat- - You have to change the desired subtitle in the edly to select the desired 1/1 MP3 2CH Disc Menu, according to discs. Press the DISC Audio on MPEG4 then MENU button. press the ENTER . - This function depends on what subtitles are Note encoded on the disc and may not work on all DVDs. - This function depends on audio languages - A DVD disc can cont
ページ20に含まれる内容の要旨
advanced functions Using the Bookmark Using the Zoom Function Function Using the Zoom Function (DVD) This feature lets you bookmark sections of a DVD so 1. During play, press the INFO button on the remote control. you can quickly find them at a later time. 2. Press the π/† buttons to select icon, then press the ENTER button to zoom in 2x, 3x, 4x. Using the Bookmark Function (DVD) 3. To make the screen disappear, press the INFO button
