ページ1に含まれる内容の要旨
Instruction Manual
DVD-V5650
DVD-V5650B
www.samsung.com
ページ2に含まれる内容の要旨
SAFETY INSTRUCTIONS Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpos
ページ3に含まれる内容の要旨
SAFETY INSTRUCTIONS Precautions TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates This symbol indicates dangerous voltage inside the product that presents a risk of important instructions accompanying the product. electric shock or personal injury. Do not install this equipment in a confined space such as a bookcase or similar unit. WARNING : To prevent damage whi
ページ4に含まれる内容の要旨
SAFETY INSTRUCTIONS CAUTION THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. Note: This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere. This DVD player is designed and manufactured to respond to the Region Management Information. If the Region
ページ5に含まれる内容の要旨
BEFORE YOU START Before you start Accessories Batteries-2EA Video/Audio Cable Remote Control Antenna Cable Users Guide AK59-00051A 1.5V(AAA) AC39-00073A AC39-42001J AK68-00956E AC43-12002H Install Batteries in the Remote Control 1 Open the battery cover on the back of the remote control. 2 Insert two AAA batteries. Make sure that the polarities (+ and -) are aligned correctly. 3 Replace the battery cover. If the remote control doesnt operate properly: ■ Check the polarity +, - of the batteri
ページ6に含まれる内容の要旨
TABLE OF CONTENTS Table of Contents Safety Instructions ........................................................................................................................................2 Important Safety Instructions ................................................................................................................2 Precautions ..........................................................................................................................................3 Before you
ページ7に含まれる内容の要旨
TABLE OF CONTENTS Chapter 4: DVD Operations Playing a Disc ..............................................................................................................................................31 Using the Search and Skip Functions ........................................................................................................33 Using the Display Function ..........................................................................................................................34 U
ページ8に含まれる内容の要旨
Chapter 1 SETUP Note General Features This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright DVD-VCR Features protection technology must be authorized by Macrovision, and is intended for home and other ■ Perfect compatibility to play back DVDs, audio limited viewing uses only unless otherwise authorized CDs or VHS Tapes. by Macrovision. Reverse engineering or disassembly ■ is prohibited. Enjoy a DV
ページ9に含まれる内容の要旨
SETUP Disc Type and Characteristics This DVD-VCR is capable of playing the following types of discs with the corresponding logos: Recording Types Disc Size Max. Playing Time Characteristics Disc Types (Logos) - DVD contains excellent sound Single-sided 240 min. DVD 5 and video due to Dolby Digital Double-sided 480 min. Audio and MPEG-2 system. + -Various screen and audio Video Single-sided 80 min. 3 1/2 functions can be easily selected Double-sided 160 min. through the on-screen menu. - CD is
ページ10に含まれる内容の要旨
SETUP Description Front Panel Controls 1 2 3 4 6 8 11 12 13 14 15 16 5 7 9 10 1 DISC TRAY 10 DVD/VCR Place the disc here. Press to view DVD or VCR mode. 2 VCR Deck 11 EZ VIEW Insert a standard VHS video tape. The aspect ratio of a picture can easily be adjusted to your TV's screen size. 3 EJECT Press to eject a video tape if the tape is stopped. 12 REC (VCR) Press to begin recording. 4 (POWER) Press to turn the DVD-VCR on and off. 13 (Reverse/Rewind) Press to reverse/rewind a disc/video tape. 5
ページ11に含まれる内容の要旨
▼ SETUP Rear Panel ❶ ❷ ❸ ❹ ➎ ❻ ❼ ❽ 1 AUDIO OUT 5 RF IN (FROM ANT.) Connect to the Audio input jacks of your Connect the RF Antenna cable to your DVD- television. You can use as audio output terminal VCR. when Component or S-Video is connected. 6 S-VIDEO OUT 2 COMPONENT VIDEO OUT Use the S-Video cable to connect this jack to the - Use these jacks if you have a TV with S-Video input jack on your television for higher Component Video in jacks. picture quality. You can use as audio output These jac
ページ12に含まれる内容の要旨
SETUP Tour of the Remote Control 1 POWER button 14 VCR button Press to turn the DVD-VCR Use to operate VCR. on and off. 15 DVD button 2 NUMBER Buttons Use to operate DVD. 3 AUDIO button 16 F.ADV/SKIP/INPUT SEL. Use this button to access button Ú Ú various audio functions on Press to advance play one Œ Œ a disc. (DVD) Æ Æ frame at a time (DVD and VCR). Press to fast forward 4 Skip button a video tape (VCR). Press Press to reverse skip a to select a external signal ´ ´ disc. Use to skip a title,
ページ13に含まれる内容の要旨
Chapter 2 CONNECTIONS Connecting the Antenna Cable There are several ways to connect your DVD-VCR. Select one of the following antenna connections that best suits you below. ■ Method 1: Antenna + DVD-VCR + TV: No Cable box ■ Method 2: Antenna +Cable box + DVD-VCR + TV: Cable box with many scrambled channels ■ Method 3: Antenna + DVD-VCR + Cable box +TV: Cable box with a few scrambled channels - If you are using an off-air antenna that has 300-ohm twin flat leads, use an external antenna connecto
ページ14に含まれる内容の要旨
CONNECTIONS Method2: Antenna + DVD-VCR + TV: Cable box with many scrambled channels Wall You can record channels by selecting the channel on the cable box. You cannot record one channel while watching another channel. Be sure that the Cable Box cable box is turned on. To RF IN To RF OUT Antenna cable To Antenna Input Method3: Antenna + DVD-VCR + TV: Cable box with a few scrambled channels Wall You can record non-scrambled channels by selecting the channel on the cable box. You cannot record scr
ページ15に含まれる内容の要旨
CONNECTIONS Before Connecting the DVD-VCR - Always turn off the DVD-VCR, TV, and other components before you connect or disconnect any cables. - Refer to the users manual of the additional components (such as a TV) you are connecting for more information on those particular components. Connection to a TV The following shows examples of connections commonly used to connect the DVD-VCR with a TV and other components. Connection to a TV (Video) 1 Using video/audio cables, connect the VIDEO (yellow
ページ16に含まれる内容の要旨
CONNECTIONS Connection to a TV (S-Video) - Connecting to your TV using an S-Video cable. -You will enjoy high quality images. S-Video separates the picture element into black and white(Y) and color(C) signals to present clearer images than regular video input mode. (Audio signals are delivered through the audio out or line out audio). 1 Using an S-Video cable (not included), connect the S-VIDEO OUT terminal on the rear of the DVD-VCR to the S-VIDEO IN terminal of your TV. 2 Using the audio cable
ページ17に含まれる内容の要旨
CONNECTIONS Connection to a TV (Interlace) - Connecting to your TV using Component video cables. -You will enjoy high quality and accurate color reproduction images. Component video separates the picture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean images. (Audio signals are delivered through the audio out or line out audio). 1 Using component video cables (not included), connect the COMPONENT VIDEO OUT terminal on the rear of the DVD-VCR to the COMPONENT
ページ18に含まれる内容の要旨
CONNECTIONS Connection to a TV (Progressive) 1 Using component video cables (not included), connect the COMPONENT VIDEO OUT terminal on the rear of the DVD-VCR to the COMPONENT IN terminal of your TV. 2 Using the audio cables, connect from the AUDIO OUT or LINE OUT AUDIO (red and white) terminals on the rear of the DVD-VCR to the AUDIO (red and white) IN terminals of your TV. Blue White Red Turn on the DVD-VCR and TV. Green Red Audio Cable Component Cable 3 (not included) With the unit in stop
ページ19に含まれる内容の要旨
CONNECTIONS Connection to an Audio System Connection to an Audio System (2 Channel Amplifier) 1 Using the audio cables, connect the (LINE) AUDIO (red and white) OUT terminals on the rear of the DVD-VCR to the AUDIO (red and white) IN terminals of the Amplifier. 2 Using the video signal cable(s), connect the VIDEO, S-VIDEO or COMPONENT OUT terminals on the rear of the DVD-VCR to the VIDEO, S-VIDEO or COMPONENT IN terminal of Red White your TV as described on pages 15 to 18. Audio Cable 3 Red Whit
ページ20に含まれる内容の要旨
CONNECTIONS Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier) 1 Using a coaxial cable (not included), connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the DVD-VCR to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier. 2 Using the video signal cable(s), connect the S-VIDEO or COMPONENT OUT terminals on the rear of the DVD-VCR to the S-VIDEO or COMPONENT OUT terminal of your TV as described on pages 15 to 18. Coaxial Cable (not included) 3 Turn on the DVD-
