ページ1に含まれる内容の要旨
DVD Player
DVP 500
Operation Manual
ページ2に含まれる内容の要旨
Contents Safety Precautions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 Features - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3 About Discs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - 4 Parts Introduction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5 Front Panel - - - - - - - - - - - - - - - - - - - -
ページ3に含まれる内容の要旨
Safety Precautions WARNING: To reduce the risk of fire or electric shock, DO NOT expose this product to rain or moisture. The lighting flash with arrowhead symbol, within a triangle, alerts the user to “dangerous voltage” which could cause electric shock. The exclamation point within a triangle indicates to the user to read important operating and maintenance instructions in the manual. IMPORTANT FOR LASER PRODUCTS 1. CL
ページ4に含まれる内容の要旨
Features DUAL COMPATIBILITY FEATURES Supports both “Progressive 1. Compatibility Scan” and “Interlaced” DVD, CD, MP3, CD-R, CD-RW, televisions. Picture CD, JPEG compatible. IMPORTANT: Ensure the 2. Zoom Function selection switch on the back You can view scenes close-up. of the DVD player matches 3. All Playback Functions your television type. Fast forward and reverse, slow playback, frame playback, HIGH QUALITY PROPERTY
ページ5に含まれる内容の要旨
About Discs DISC LOGO CONTENTS SIZE MAXIMUM TIME 120min one side 12cm 240min two sides Audio + Video DVD (active picture) 80min one side 8cm 160min two sides 12cm 74min CD Audio 8cm 20min MP3 Audio 12cm 600min The disc manufacturer specifies operation instructions for some DVD discs. Please refer to the instruction manual for details. NOTES 1. Using of Discs 2. Cleaning of Discs Do not touch the playing surface of If a
ページ6に含まれる内容の要旨
Parts Introduction Front Panel 1. POWER button 5. EJECT button -Press to turn on/off the power. -Press to open/close the disc 2. Disc tray tray. -Used to load disc 6. PLAY button 2. Display panel -Press to begin the playback of -Indicates the current status of the inserted disc. the unit. 7. STOP button 4. Remote sensor -Press to stop playback. -Receiving the signal from the 8. PREV button remote contro
ページ7に含まれる内容の要旨
Parts Introduction Display Panel 1 1 2 2 3 3 4 4 5 5 6 6 C CD D M MP P3 3 A A A AL L L LL L L L 7 7 8 8 9 9 1 10 0 1 11 1 1 12 2 1 13 3 1. DVD disc indicator 4. S-Video Output jack 2. Playing/pause status indicator 9. Repeat status indicator 3. CD disc indicator 10. Chapter number indicator for 4. Dolby double-D mark in
ページ8に含まれる内容の要旨
“Progressive” mode 7. Power-supply cord. Remote Control 1. Power 2. Angle 3. Audio 4. Numeric buttons 5. +10 button 6. Menu 7. Navigation buttons 8. Setup 9. Pause/Step 10. Reverse 11. Forward 12. Program 13. Slow 14. Display 15. Eject 16. Subtitle On/Off 17. Subtitle 18. Search 19. Title 20. Zoom 21. Stop 22. Play 23. Next Skip/Scan 24. Previous Skip/Scan 25. Repeat 26. A-B Repeat 27. Volume Up/Do
ページ9に含まれる内容の要旨
Remote Control Functions 1. Power -Press to turn the DVD player on or off. 2. Angle -Press to access various camera angles (if the DVD disc contains multiple camera angles). 3. Audio -Press to access various audio languages (if the DVD disc contains multiple audio languages). 4. Numeric buttons -Select numbers by pressing these buttons. 5. +10 button -Select numbers greater than 9 by pressing the (+10) button first, and then an additional numeric b
ページ10に含まれる内容の要旨
Connections Do not connect the power cord until all other connections have been made. Do not block the ventilation holes of any equipment, and arrange them so that air can circulate freely. Audio connections: there are stereo audio, coaxial and component digital audio outputs. Video connections: there are Video and S-Video outputs. Ensure that you observe the color-coding when connecting audio and video cables. Connecting To a TV Make o
ページ11に含まれる内容の要旨
Connections NOTE: We suggest using S-Video for higher quality pictures, you may also use the standard composite video connection if your TV does not have an S-Video input. Component Video connection 1. Connect the COMPONENT VIDEO OUT jacks on the DVD Player to the corresponding input jacks on the TV using a Y/Pb(Cb)/Pr(Cr) cable supplied. 2. Connect the Left and Right AUDIO OUT jacks of the DVD Player to the audio left/right input jacks on the TV us
ページ12に含まれる内容の要旨
Connections Connecting To an Amplifier With Dolby Digital or DTS Decoder Connect the DVD Player’s DIGITAL AUDIO OUT jack (coaxial) to the corresponding input jack on your amplifier with a digital (coaxial) audio cable (not supplied). When DVDs encoded in Dolby Digital or DTS are played, the Dolby Digital or DTS bit stream is outputted from the player’s coaxial digital audio output. When the DVD player is connected to a Dolby Digital or DTS decoder, you
ページ13に含まれる内容の要旨
Remote Control Operation Remote Control Operation Range Battery Installation Point the remote control unit from Insert the batteries supplied while observing the correct (+) and ( ) no more than about 23 feet from the remote sensor and within about polarities. 60 degrees of the front of the unit. Service life of Batteries The batteries normally last for about six months, although this depends on how often, and for what operations, the re
ページ14に含まれる内容の要旨
System Setup System Defaults choose the highlighted content. The final step of the installation is The current setting is highlighted. to establish the system’s defaults. It If you wish to change this setting, is helpful to take a few minutes to use the (/) buttons to select a familiarize yourself with these new setting and press the Enter settings, as they may require button. Press the Navigation change before the first use and butt
ページ15に含まれる内容の要旨
System Setup General Setup When you enter the Setup menu, use the (/) buttons to highlight - - GENERAL SETUP PAGE - - the General Setup, then press the TV DISPLAY button to access the General ANGLE MARK >ON Setup. The left column shows the OSD LANGUAGE OFF CAPTIONS items in the General Setup. The SCREEN SAVER right column shows the current AUDIO OUT setting for each item. MAIN PAGE - - GENERAL
ページ16に含まれる内容の要旨
select your language preference. System Setup Captions function. Select the Captions menu by Audio Out pressing the (/) Navigation Select the Audio out menu by buttons until CAPIIONS is pressing the (/) Navigation highlighted and then press the buttons until AUDIO OUT is button to access the submenu. highlighted and then press the This setting allows you to select button to access the submenu. This “ON” or “OFF”. setting allows you to select “SPD
ページ17に含まれる内容の要旨
System Setup Audio Setup In the Setup menu, use the (/) Navigation buttons to highlight the This setting enables Dolby Digital Audio Setup; press the ENTER recordings to be played back with button to access the Audio full dialog volume while reducing submenu. The left column shows peak volume levels. This smooth the items in the Audio Setup menu. level compression prevents abrupt The right column shows the current volume transitions without red
ページ18に含まれる内容の要旨
- 17 -
ページ19に含まれる内容の要旨
System Setup Audio you may press the button Select AUDIO with the (/) proceed to the next setting. buttons, if it is not already selected; To change the setting, make certain press the button to access the that the SUBTITLE line is Audio submenu. The right column highlighted and press the button. displays the current setting The right side of the screen will (highlighted) and the options. Press then display the available options the ENTER button
ページ20に含まれる内容の要旨
- 19 -
