ページ1に含まれる内容の要旨
DVD Player
DVP 0600
Operation Manual
- 1 -
ページ2に含まれる内容の要旨
Contents Important Safety Instructions --------------------------------------------------------------------- 3 Features ------------------------------------------------------------------------------------------------ 4 About Discs -------------------------------------------------------------------------------------------- 5 Care of Discs -------------------------------------------------------------------------------------------- 6 Elements of Operation------------------------------
ページ3に含まれる内容の要旨
Important Safety Instructions WARNING: To reduce the risk of fire or electric shock, DO NOT expose this product to rain or moisture. The lighting flash with arrowhead symbol within a triangle alerts the user to “dangerous voltage” which could cause electric shock. The exclamation point within a triangle alerts the user to read important operating and maintenance instructions in the manual. IMPORTANT FOR LASER PRODUCTS CLASS 1 LASER P
ページ4に含まれる内容の要旨
Features DUAL COMPATIBILITY ■ VIDEO OUT Supports both “Progressive scan” and Standard Video, S-Video and easy “Interlaced” televisions. PAL/NTSC shift. Progressive Scan creates a picture signal ■ AUDIO OUT with double the scan lines of a 2CH and 5.1CH analog audio output, conventional DVD, resulting in higher optical and coaxial digital audio output picture resolution and sharper image can be connected to any amplifie
ページ5に含まれる内容の要旨
About Discs Disc Formats Supported by this Player The unit can play discs bearing any of the following logos: PLAYBACK TIME/ DISC LOGO DIAMETER PLAYABLE SIDES 133 min SS-SL 242 min SS-DL DVD 12cm 266 min DS-SL 484 min DS-DL 12cm 74 min CD 8cm 20 min MP3 12cm 600 min DIVX 12cm The operating method of some DVD discs is specified by the software maker. Please refer to the instruction manual of the disc. The D
ページ6に含まれる内容の要旨
Care of Discs How to hold discs Cleaning Care When loading or removing discs, try not Use a soft, dry cloth for cleaning. For to touch their playing surfaces. stubborn dirt, soak the cloth in a detergent solution; ring well first and wipe. Use a dry cloth to wipe it dry. Do not use any volatile agents such as benzine or paint thinner, as they may damage the surface of the player. Cleaning Lens cleaner Fingerprints or other d
ページ7に含まれる内容の要旨
Elements of Operation – Front Panel 1. Standby-on button 7. STOP button -Press to turn off the power. -Press to stop playback. 2. Remote sensor 8. PREV button -Receiving remote control signal for -Press to select the previous track or operation. menu page. 3. Display panel 9. NEXT button -Indicates the current status of the -Press to select the next track or unit. menu page. 4. Disc tray 10. MENU button -Used to load disc -Pr
ページ8に含まれる内容の要旨
Rear Panel 1. 5.1CH Audio output jacks 6. Video output jack 2. 2CH Audio output jacks 7. Component (Y/Y, Pb/Cb, Pr/Cr) 3. Coaxial digital audio output jack output jacks 4. Optical digital audio output jack 8. Switch between progressive and 5. S-video output jack interlace scan 9. Power-supply cord - 8 -
ページ9に含まれる内容の要旨
Remote Control Handset Button Functions 1. Power 5. 10 -Press to turn the DVD player on or off. -Used corporately with 0-9 number 2. Angle buttons to select the track number more -Press to access various camera angles than nine numbers. (if the DVD contains multiple camera 6. Menu angles). -Press to display/close the disc menu 3. Audio on the TV screen in Play mode. -Press to access various audio 7. Direction buttons ( ◄
ページ10に含まれる内容の要旨
Remote Control Handset Button Functions 9. Pause/Step 19. Title -Press to pause playback or step frame -Press to display titles if present on the by frame. DVD disc. -Press PLAY button to resume normal 20. Enter playback. -Press to confirm after selection. 10. Reverse 21. Zoom -Press to search backward. -When a DVD disc is playing, press this 11. Forward button to activate zoom. -Press to search forward. 22. Stop 12. Program -Press to stop playback, press t
ページ11に含まれる内容の要旨
Usage of the Remote Control Battery Installation ● Do not mix old and new batteries. Insert the batteries supplied while ● Wipe away any leakage inside the observing the correct (+) and ( ) remote control unit, and install new polarities. batteries. ● If leakage should come into contact with your skin, immediately wash it off thoroughly with water. ● Batteries contain chemical substances and we recommend that you dispose of them properly and i
ページ12に含まれる内容の要旨
Connections Do not connect the power cord until all other connections have been made. Audio Connection: There are stereo audio output and coaxial digital audio output; Video Connection: there are video output and S-video output. You can choose anyone to connect. Connecting to a TV The connection is shown as following: 1. In this figure, there are VIDEO OUT and S-VIDEO OUT. If the TV has S-VIDEO IN jack, you can achieve more vivid
ページ13に含まれる内容の要旨
Connections 3. Y Cb Cr video connection If a display device with Y/Cb/Cr jacks is connected, then you should connect the jacks with three Y/Cb/Cr cables: 1) Press the SETUP button to access the setup menu. 2) Press the up/down direction buttons to select “VIDEO OUTPUT” in “PREFERENCES”. 3) Select “YPBPR/YCBCR” in “VIDEO OUTPUT”, then press the ENTER button to confirm. IMPORTANT: Y/Cb/Cr uses interlacing. Please move switch on the rea
ページ14に含まれる内容の要旨
Connections Connecting to an Analog Amplifier - 14 -
ページ15に含まれる内容の要旨
Connections Connecting to an Amplifier with 5.1 CH Audio Output Audio Connection: To experience the best possible sound from your DVD player, you should use the 5.1 channel audio connections. To do this, connect the 5.1 CH AUDIO OUT jacks on the DVD player to the corresponding AUDIO IN on your amplifier. Ensure that each channel is connected correctly. For example, the subwoofer output from the DVD player must be connected to the subwoofer i
ページ16に含まれる内容の要旨
Connections Connecting to an Amplifier with Dolby Digital Decoder If the amplifier has Dolby Digital decoding function, set the output format of digital audio signal in setup menu to “SPDIF/RAW”. An optical digital audio cable or coaxial audio cable (both optional) is required for these connections, as shown above. Only one connection is needed, not both at the same time.
ページ17に含まれる内容の要旨
Disc Play Operations Preparation After connection, turn on the power of relevant equipment and select video input. 1. Turn on the player’s power Press the EJECT button on front panel to turn on the power and the player will search for the disc automatically. If there is a disc in, the player will play it. 2. Press the EJECT button on front panel or the OPEN/CLOSE button on remote control to open the disc tray. 3. Load the disc into th
ページ18に含まれる内容の要旨
Disc Play Operations Subtitle The DVD player can support up to 32 kinds of subtitles. When you play a multi-subtitle disc, press the SUBTITLE button on remote control to select different subtitle. Angle The DVD player supports multi-angle function. Multi-angle means that a scene is shot from different angles so that audience can watch from any angle. If there are multiple angles in a scene, you can use the ANGLE button to select the angle you
ページ19に含まれる内容の要旨
Disc Play Operations JPEG Playback JPEG is a common picture format that has few bytes and low loss rate of picture. Hundreds of pictures can be stored in a disc in this format. In order to realize real digital album, use film to make”PICTURE CD”, namely JPEG format. 1. Normal Playback Load a JPEG disc in. After reading the disc, the display may show “SMART NAVI” and “ROOT” (the left is the menu of last level and the right is the menu of next l
ページ20に含まれる内容の要旨
Playback Functions Stop During playback, press the STOP button on remote control to stop playback. For DVD discs, after pressing the STOP button once, if you press the PLAY button, then the player will play from the stopped point. Pause Press the PAUSE/STEP button on remote control to pause, and press it repeatedly to achieve step-by-step playback. Repeat 1. Use the REPEAT button to repeat a title, a chapter, a track and a disc respectively
