ページ1に含まれる内容の要旨
Model: 434
DVD VIDEO PLAYER
.
User Manual
.
Manuel D’utilisation
.
Manual de Instrucciones
.
Manual do Utilizador
.
Gebruikershandleiding
3139 246 16611
01-39 xDV434_Eng_191 1 13/04/05, 1:48 PM
ページ2に含まれる内容の要旨
Important notes for users in the CAUTION U.K. Use of controls or adjustments or Mains plug performance of procedures other This apparatus is fitted with an approved 13 than herein may result in hazardous Amp plug. To change a fuse in this type of plug radiation exposure or other unsafe proceed as follows: operation. 1 Remove fuse cover and fuse. 2 Fix new fuse which should be a BS1362 5 Amp, VAROITUS A.S.T.A. or BSI approved type. Muiden kuin tässä esitettyjen 3 Refit the fuse cover. toimintoje
ページ3に含まれる内容の要旨
DK SF Luokan 1 laserlaite Advarsel: Usynlig laserstråling ved åbning når sikkerhedsafbrydere er ude Varoitus! Laitteen käyttäminen muulla af funktion. Undgå utsættelse for kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän stråling. turvallisuusluokan 1 ylittävälle Bemærk: Netafbryderen er sekundært näkymättömälle lasersäteilylle. indkoblet og ofbryder ikke strømmen Oikeus muutoksiin varataan. Laite ei fra nettet. Den indbyggede netdel er saa olla alttiina tippu-ja roiske
ページ4に含まれる内容の要旨
General Information Environmental Information Laser safety All unnecessary packaging has been This unit employs a laser. Due to possible omitted. The packaging has been made eye injury, only a qualified service person easy to separate into two materials: should remove the cover or attempt to cardboard (box, buffer) and polyethylene service this device. (bags, protective foam sheet). NOTE: Your DVD player consists of materials PICTURES SHOWN MAYBE which can be recycled and reused if DIFFERENT BET
ページ5に含まれる内容の要旨
Index English --------------------------------------- 6 Français ------------------------------------ 40 CAUTION VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM. ADVARSEL SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING UNDGÅ UDSÆTTELSE FOR STRÅLING VARNING SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD BETRAKTA EJ STRÅLEN VARO! AVATTAESSA OLET ALTTIINA NÄKYVÄLLE JA NÄKYMÄTTÖMÄLLE LASER SÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN VORSICHT GEFAHR VON SICHTBARER UND UNSICHTBARER L
ページ6に含まれる内容の要旨
English Contents Introduction Disc Operations Supplied accessories ....................................... 8 Playable Discs ................................................. 19 Care and safety information .......................... 8 Region Codes ................................................. 19 Playing discs ..................................................... 19 Basic playback controls................................. 20 Connections Selecting various repeat/shuffle functions 20 Connecting
ページ7に含まれる内容の要旨
Contents DVD Menu Options General Setup menu ............................... 26-27 Locking/Unlocking the disc for viewing ... 26 Dimming system’s display screen .............. 26 Programming disc tracks .......................26-27 OSD Language ............................................... 27 Screen Saver - turning on/off ..................... 27 Sleep ................................................................ 27 DivX VOD registration code ..................... 27 Audio Setup Menu ......
ページ8に含まれる内容の要旨
English Introduction Do not block the vents Supplied accessories – Do not operate the DVD Player in an enclosed cabinet, allow about 10 cm (4 inch) of free space all around the player for adequate ventilation. 10 cm (4 inches) 10 cm PHILIPS 10 cm (4 inches) (4 inches) Remote Control and Care of the cabinet two AAA batteries – Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. Finding a suitable locat
ページ9に含まれる内容の要旨
Connections Connecting TV S-VIDEO IN AUDIO TV IN S-VIDEO IN IN AUDIO TV IN IN VIDEO IN S-VIDEO VIDEO IN IN AUDIO TV IN IN VIDEO IN S-VIDEO IN AUDIO IN TV IN VIDEO IN 1 2 1 IMPORTANT! Using Composite Video jacks – You only need to make one video (CVBS) connection from the following 1 Use the composite video cable (yellow) to options, depending on the connect the DVD Player’s CVBS (VIDEO) capabilities of your TV system. jack to the video input jack (or labeled as – Connect the DVD system directly
ページ10に含まれる内容の要旨
English Connections RF coaxial cable to TV 2 COMPONENT VIDEO IN Back of RF Modulator S-VIDEO IN V (Pr/Cr) (example only) AUDIO IN U (Pb/Cb) INT IN TO TV VIDEO AUDIO IN VIDEO IN IN R L COMPONENT VIDEO IN Y S-VIDEO IN V (Pr/Cr) AUDIO IN U (Pb/Cb) VIDEO IN Y CH3 CH4 Antenna or 1 2 Cable TV signal 1 IMPORTANT! IMPORTANT! – If your TV only has a single – The progressive scan video Antenna In jack (or labeled as 75 quality is only possible when using ohm or RF In,) you will need an RF
ページ11に含まれる内容の要旨
Connections Connecting the power cord COMPONENT VIDEO IN S-VIDEO IN AUDIO V (Pr/Cr) OUT ~ AC MAINS U (Pb/Cb) VIDEO IN Y After everything is connected properly, plug in the AC power cord to the power outlet. Never make or change any connections with the power switched on. When no disc is loaded, press STANDBY ON on the DVD Player front panel, “NO DISC” may appear on the display panel. O OPEN/CLOSE PEN/CLOSE S ST TO OP P P PLA LAY Y//P PA AU US SE E NO DISC TANDBY ON MIC LEVEL 11 3139 246 16611 01
ページ12に含まれる内容の要旨
English Connections Optional: Connecting to an Optional: Connecting Digital AV Audio System Receiver STEREO AV Receiver AUDIO AUDIO IN IN DIGITAL DIGITAL Stereo system has Dolby Pro Logic Receiver has a PCM, Dolby Digital, or Right / Left Audio In jack or MPEG2 decoder 1 Select one of the video connections 1 Select one of the video connections (CVBS VIDEO IN, SCART or (CVBS VIDEO IN, SCART or COMPONENT VIDEO IN) depending on COMPONENT VIDEO IN) depending on the options available on your TV. th
ページ13に含まれる内容の要旨
Functional Overview Front and Rear Panels STANDBY-ON B – To switch the DVD Player to Standby mode or ON IR Sensor – Point the remote control towards this Disc tray sensor OPEN/CLOSE / 2; PLAY/PAUSE – Open/Close the disc tray – To start or interrupt playback Display 9 STOP – Shows the current status of the DVD – To stop playback Player O OPEN/CLOSE PEN/CLOSE ST STO OP P PLA PLAY/ Y/P PA AUSE USE ST TA ANDBY NDBY-ON ON MIC LEVEL TV OUT – Connect to Scart input of a TV Mains (AC Power Cord) Audio O
ページ14に含まれる内容の要旨
English Functional Overview Remote Control POWER B PREVIEW – To switch the DVD player to – To search chapter/track during standby mode or ON playback 0-9 numerical key pad MUTE – Selects numbered items in a menu – Disables or enables sound output RETURN/TITLE DISPLAY – To go back to previous menu/show – Displays information on TV title menu screen during playback T S – To search or select next chapter – To search or select previous or track chapter or track PAUSE ( ; ) PLAY ( B ) – To pause play
ページ15に含まれる内容の要旨
Getting Started Step 1: Inserting batteries into Step 2: Setting up the TV the Remote Control IMPORTANT! Make sure you have completed all 3 the necessary connections. (See pages 9-10 “Connecting TV”). 1 2 1 Turn on the TV and set to the correct video-in channel. You should see the DVD background screen on the TV. 2 Usually these channels are between the 1 Open the battery compartment. lowest and highest channels and may be 2 Insert two batteries type R03 or AAA, called FRONT, A/V IN, or VIDEO.
ページ16に含まれる内容の要旨
English Getting Started 7 Select {PROGRESSIVE} to {ON}, then OK Setting up Progressive Scan feature to confirm. (for Progressive Scan TV only) ➜ The instruction menu appears on the The progressive scan display twice the TV. number of frames per seconds than interlaced scanning (ordinary normal TV ACTIVATING PROGRESSIVE: system). With nearly double the number 1) ENSURE YOUR TV HAS PROGRESSIVE SCAN. of lines, progressive scan offers higher 2) CONNECT USING YPBPR (GBR) VIDEO CABLE. picture resolut
ページ17に含まれる内容の要旨
Getting Started 4 Press 3 4 to highlight one of the options To deactivate Progressive manually below: When the distorted picture still PAL – Select this if the connected TV is appears on the TV, it may be due to PAL system. It will change the video signal the connected TV does not accept of a NTSC disc and output in PAL format. progressive signals, and progressive is set by mistake. You must reset the unit to NTSC – Select this if the connected TV interlace format. is NTSC system. It will ch
ページ18に含まれる内容の要旨
English Getting Started Step 3: Setting language Setting the Audio, Subtitle and Disc menu language preference You can choose your own preferred You can select your preferred language language or soundtrack from audio, settings. This DVD Player will subtitles and disc menu languages. If the automatically switch to the language for language selected is not available on the you whenever you load a disc. disc, the disc’s default language will be used instead. Setting the OSD Language The On-screen
ページ19に含まれる内容の要旨
Disc Operations IMPORTANT! Region Codes – If the inhibit icon (ø) appears on DVD discs must be labeled for ALL ALL the TV screen when a button is regions or Region 2 in order to pressed, it means the function is not play on this Player. You cannot play available on the current disc or at 2 Discs that are labeled for other the current time. regions. – Depending on the DVD or VIDEO CD, some operations may be Helpful Hints: different or restricted. – It may not be possible to play CD-R/RW – Do not
ページ20に含まれる内容の要旨
English Disc Operations Basic playback controls Selecting various repeat/shuffle functions Unless otherwise stated, all operations described are based on Remote Control Repeat play mode use. While playing a disc, press REPEAT Pausing playback continuously to choose a ‘Play Mode’. 1 During playback, press PAUSEÅ. CHAPTER (DVD) ➜ Playback will pause and sound will be – to repeat playback of the current muted. chapter. 2 To resume normal playback, press TRACK/TITLE (CD/SVCD/VCD/DVD) PLAY B. – to
