Philips MCD906/73の取扱説明書

ページ1に含まれる内容の要旨

2
User Manual
1
Quick Start Guide
MCD 906
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
3
1
2
Remote control with two
Composite Video Cable
AAA batteries
Quick start guide
FM antenna
User manual
MCD906 QSG_Eng-98 1 2008.9.4, 16:48

ページ2に含まれる内容の要旨

1 Connect the speaker cables. 2 Connect the FM antenna. Tips – See the User Manual for other TV 4 connection options. Connect the composite video cable to a TV. –For connecting to a Progressive Scan TV, refer to the user manual for proper 5 connections and detailed setup. Connect the power cords of the system and TV. Speaker Speaker (right) (left) 1 2 3 4 FM antenna AC power Setting up the TV 1 Press SOURCE (DISC on the remote control) to select disc source. 2 Turn on the TV and set it to the co

ページ3に含まれる内容の要旨

Setting the clock 1 In standby mode, press and hold CLOCK on the remote control. 2 When the hour digits flash, turn VOLUME-/+ on the system or press VOL +/- on the remote control to set the hours. 3 Press CLOCK again and the minute digits flash. Then turn VOLUME-/+ on the system or press VOL+/- on the remote control to set the minutes. 4 Press CLOCK again to confirm the time setting. Setting DVD menu options IMPORTANT! If the progressive scan feature is activated but the connected TV does not su

ページ4に含まれる内容の要旨

Playing a disc 1 Press ç to open the disc tray and load in a disc, then press the same button again to close the disc tray. ➜ Make sure the label side of the disc is facing up. 2 Playback will start automatically. If not pressÉÅ. 3 To stop playback, press 9. Programming and tuning to radio stations 1 Press SOURCE (TUNER on the remote control) to select tuner source. 2 Press PROGRAM on the remote control for more than two seconds to program all available stations in order of waveband. 3 Press ¡ /