ページ1に含まれる内容の要旨
MCD755
DVD Micro Theatre
pg 001-039_MCD755_93_Eng 1 2007.8.29, 10:21
ページ2に含まれる内容の要旨
HDMI (High Definition Multimedia Interface) is a digital interface that allows pure HD digital video transmission without the loss of image quality. The integrated control bus allows system control between the TV set and connected devices like a digital set top box. This product incorporates Manufactured under license from Dolby copyright protection Laboratories. technology that is "Dolby", "Pro-logic" and the double-D symbol are protected by method trademarks of Dolby Laboratories. claims of ce
ページ3に含まれる内容の要旨
Index English ------------------------------------------------ 4 -------------------------------------------------------- 40 3 pg 001-039_MCD755_93_Eng 3 2007.8.29, 10:21 English
ページ4に含まれる内容の要旨
English Contents General Information Disc Operations Features .................................................................. 6 Playable Discs ...................................................... 20 Supplied accessories ............................................ 6 Playing discs ......................................................... 20 Environment information ................................... 6 Using the Disc Menu ......................................... 21 Installation .............
ページ5に含まれる内容の要旨
Contents System Menu Options Basic Operations ................................................ 26 GENERAL SETUP PAGE ........................... 26~27 TV DISPLAY OSD LANGUAGE SCREEN SAVER DIVX(R) VOD registration code Audio Setup Page ........................................ 27~29 SPEAKER SETUP SPDIF SETUP DOLBY DIGITAL SETUP 3D PROCESSING HDCD NIGHT MODE VIDEO SETUP PAGE ................................. 29~30 COMPONENT TV MODE QUALITY HDMI SETUP PREFERENCE PAGE ................................
ページ6に含まれる内容の要旨
English General Information Congratulations on your purchase and welcome Supplied accessories to Philips! – Remote control with two AAA batteries – FM wire antenna To fully benefit from the support that Philips – Composite video cable (yellow) offers, register your product at www.philips.com/ – Control cable welcome. – Five satellite speakers – One passive subwoofer Features –Power cord Your DVD Micro Theatre with 5.1-channel full – Stand for the DVD player and power digital amplifier creates th
ページ7に含まれる内容の要旨
General Information Installation ● Place the player on a flat, hard, and stable surface. ● In a cabinet, allow about 10cm (4 inches) of free space all around the player for adequate ventilation. ● Do not expose your player to extreme temperatures or humidity. ● The apparatus shall not be exposed to dripping or splashing. ● No objects filled with liquids, such as vases, shall be placed on the apparatus. ● No naked flame sources, such as lighted candles, shall be placed on the apparatus. ● Instal
ページ8に含まれる内容の要旨
English Connections IMPORTANT! Step 2: Connecting speakers – The type plate is located at the and subwoofer bottom of the system. – Before connecting the AC power cord Surround to the wall outlet, ensure that all speaker (left) Front speaker (left) other connections have been made. Center speaker –Never make or change any connections with the power switched on. Step 1: Placing the speakers and subwoofer Center speaker and DVD system Surround speaker (right) 2 Front speaker Front speaker Front
ページ9に含まれる内容の要旨
Connections Step 3: Connecting the control 1 Use the composite video cable (yellow) to connect the system's VIDEO OUT jack to the cable video input jack (or labelled as A/V In, Video In, Composite or Baseband) on the TV set. 2 To listen to the TV channels through this DVD system, use the audio cables (white/red-not supplied) to connect AUX IN jacks to the corresponding AUDIO OUT jacks on the TV. Using Component Video jacks (Y Pb Pr) IMPORTANT! – The progressive scan video quality is ● Connect th
ページ10に含まれる内容の要旨
English Connections Note: Using an accessory RF modulator – If your TV does not support Progressive Scan, you will not be able to view the picture. IMPORTANT! Press SYSTEM on the remote to exit the system – If your TV only has a single Antenna In menu and then DISC and “1” to exit progressive jack (labeled as 75 ohm or RF In), you scan. will need an RF modulator in order to view DVD playback on the TV. See your electronics retailer or contact Philips for Using S-Video jack details on RF modulat
ページ11に含まれる内容の要旨
Connections Step 5: Connecting FM Step 6: Connecting the power antenna cord FM antenna 1 ~ AC MAINS ● Connect the supplied FM antenna to the FM (75 Power Outlet Ω) jack. Extend the FM antenna and fix its end to the wall. For better FM stereo reception, connect an After everything is connected properly, external FM antenna (not supplied). plug in the AC power cords of the main set and TV set to the power outlet. Never make or change any connection with the power switched on. Additional:
ページ12に含まれる内容の要旨
English Connections Connecting to a TV with HDMI Jack E VIDEO IN HDMI connects untouched and uncompressed AUDIO IN C R VCR digital transmission for the highest and crispest L sound/image quality. It has plug and play capability using only one cable for both audio/video output. B ● Use a HDMI cable (not supplied) to connect the HDMI jack on the DVD Player to HDMI IN AUDIO OUT L on a HDMI compatible device (e.g.; TV, Projector, R A Adaptor). ➜ It may take a while for the DVD player and input devic
ページ13に含まれる内容の要旨
Functional Overview 1 2 6 43 6 758 9 0 ! 7 OPEN•CLOSE ç DVD player and power amplifier – opens or closes the disc tray. 1 STANDBY-ON B 8 SURROUND – switches the system on or to standby mode. – selects 2.1 channel output (2.1CH) or 5.1 channel output (SUR5.1 or DVD5.1). 2 Display – shows the current status of the DVD player. 9 SOURCE – selects the respective sound source: DVD/AUX/ 3ÉÅ TUNER (FM). – starts or interrupts disc playback. – switches the system on. 4 PRESET + 0 IR SENSOR – in tuner mod
ページ14に含まれる内容の要旨
English Functional Overview 4 PROG Remote control – DVD/VCD/CD: enters the program menu. – MP3/WMA-CD: adds/deletes a programmed 1 B track to/from the program list. – switches the system on/ off. – Picture CD: during playback, to select a slide 2 0 show mode. – opens or closes the disc compartment – Tuner: programs preset radio stations. 3 Numeric Keypad (0-9) 5 GOTO/ST – inputs a track/title/chapter number of the disc. – Disc: fast searches in a disc by entering a time, title, chapter or track.
ページ15に含まれる内容の要旨
Functional Overview ∞ A-B $ CH +/- (¡ / ™) – Disc: skips to the previous/next chapter/title/ – repeats playback of a specific section on a disc. track § MODE – Tuner: selects a preset radio station. – selects various repeat modes or the shuffle play %ÉÅ mode for a disc. – starts or interrupts disc playback. ≥ SLOW ^ 9 – selects different slow playback modes for a – stops disc playback or erases a program. DivX/VCD/SVCD/DVD. & DISC/TUNER/AUX • DBB – enables or disables bass enhancement. – selects
ページ16に含まれる内容の要旨
English Getting Started ➜ Or, you may go to channel 1 on your TV, then Step 1: Inserting batteries into press the Channel down button repeatedly until the Remote Control you see the Video In channel. ➜ Or, the TV Remote Control may have a 3 button or switch that chooses different video 1 modes. ➜ Or, set the TV to channel 3 or 4 if you are 2 using an RF modulator. Selecting the colour system that corresponds to your TV 1 Open the battery compartment. 2 Insert two AAA batteries following the This
ページ17に含まれる内容の要旨
Getting Started Setting up Progressive Scan feature (for There will be a distorted picture on your Progressive Scan TV only) TV at this state until you turn on the progressive scan mode on your TV. The progressive scan display twice the number 9 Turn on your TV progressive scan mode (refer to of frames per seconds than interlaced scanning your TV user manual). (ordinary normal TV system). With nearly double ➜ The below menu appears on the TV. the number of lines, progressive scan offers higher p
ページ18に含まれる内容の要旨
English Getting Started 1 Press SYSTEM. Adjusting the delay effect 2 Press 1 2 to select “GENERAL SETUP PAGE”. 3 Use 1 2 3 4 on the remote to navigate in SPEAKER SETUP the menu. CHANNEL DELAY Move to “OSD LANGUAGE” and press 2. 4 Select a language and press OK. To exit from the menu 1 Press SYSTEM. ● Press SYSTEM again. 2 Use 3 4 to select "AUDIO SETUP PAGE". 3 Use 3 4 on the remote to highlight Setting the Audio, Subtitle and Disc "CHANNEL DELAY" and then press 2 or OK Menu language to enter ch
ページ19に含まれる内容の要旨
Basic Operations DSC (Digital Sound Control) Switching the system on/off DSC provides a different type of preset sound ● Press STANDBY-ONB (B on the remote). equalizer setting. ➜ “HELLO” is displayed briefly. The system will switch to the last selected source. ● Press DSC on the remote repeatedly to select: FLAT, POPS, JAZZ, CLASSIC or ROCK. ● Press DISC, TUNER or AUX on the remote. ➜ The system will switch to the selected source. Selecting surround sound To switch the system to standby mode IMP
ページ20に含まれる内容の要旨
English Disc Operations IMPORTANT! Region Codes – Depending on the DVD or VIDEO CD, DVDs must be labeled as shown below in order some operations may be different or to play on this DVD system. You cannot play restricted. discs that are labeled for other regions. – Do not push on the disc tray or put any objects other than disc on the disc tray. Doing so may cause the disc player malfunction. Note: – If the inhibit icon (ø) appears on the – If you are having trouble playing a certain disc, TV scr
