ページ1に含まれる内容の要旨
2
User Manual
1
Quick Start Guide
MCD 705
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
Composite video and audio
Remote control with two
4XSpeaker stands and wall
cables
AAA batteries
brackes with screws
(yellow, white, red)
Quick start guide
FM and MW antennas
Control Cable
User manual
MCD705 QUG_Eng 1 2005.9.14, 9:15
ページ2に含まれる内容の要旨
1 Connect the speaker cables. 2 Tips Connect the MW and FM antennas. – See the User Manual for other TV connection options. 3 – See the related part in the User Connect the control cable. Manual if you want to mount the speakers on the wall. 4 –For connecting to a Progressive Scan Connect the composite video and audio cables to a TV. TV, refer to the user manual for proper connections and detailed setup. 5 Connect the power cords of the system and TV. AC power 5 2 4 Rear Speaker (Left) Front Spe
ページ3に含まれる内容の要旨
Setting the clock 1 In standby mode, press and hold CLOCK on the remote. 2 When the hour digits flash, turn VOLUME-/+ on the system or press VOLUME+/- on the remote to set the hours. 3 Press CLOCK again and the minute digits flash. Then turn VOLUME-/+ on the system or press VOLUME+/- on the remote to set the minutes. 4 Press CLOCK again to confirm the time setting. Setting DVD menu options IMPORTANT! If the progressive scan feature is activated but the connected TV does not support progressive s
ページ4に含まれる内容の要旨
Playing a disc 1 Press OPEN •CLOSEç (ç on the remote) to open the disc tray and load in a disc, then press the same button again to close the disc tray. 2 OPEN•CLOSE Load in a disc with the label side facing up. 3 Playback will start automatically. If not pressÉÅ. 4 To stop playback, press PRESET-/9 (9 on the remote). Programming and tuning to radio stations 1 Press SOURCE (TUNER on the remote) to select tuner source. 2 Press PROG on the remote for more than two seconds to program all available
