Philips MCD297/12の取扱説明書

ページ1に含まれる内容の要旨

1
Quick Start Guide
2
User Manual
MCD297
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
Remove the plastic
USB/ USB/
protective sheet
Remote control with
Quick Start Guide
Composite Video Cable
battery
MW antenna FM antenna User Manual
MCD297 QUG_Eng 1 2008.6.24, 10:37 AM

ページ2に含まれる内容の要旨

1 Connect the speaker cables. 2 Connect the FM and MW antennas. Tip 3 See the User Manual for other TV connection options. Connect the composite video cable to a TV. 4 Connect the power cords of the system and TV. MW loop antenna FM wire A antenna LINE OUT A To listen to the sound of this DVD Player R L FM aerial 75 Ω through your TV, use the audio cables (white/ VIDEO S-VIDEO MW aerial red-not supplied) to connect LINE OUT Speaker Speaker VIDEO OUT (L/R) jacks of the D

ページ3に含まれる内容の要旨

Setting the clock Important! – To set clock in the Eco Power mode, press and hold ECO POWER/STANDBY ON on the set for 3 seconds or more to switch to normal standby mode first before proceeding with the procedures below. 1 In standby mode, press and hold CLOCK on the system. 2 When the hour digits flash, turn the VOLUME -/+ control on the front panel or press VOL +/- on the remote to set the hours. 3 Press CLOCK again and the minute digits flash. Then turn the VOLUME -/+ control on the front pan

ページ4に含まれる内容の要旨

Playing a disc 1 Press OPEN•CLOSE 0 to open the disc tray and load in a disc, then press the same button again to close the disc tray. ➜ Make sure the label side of the disc is facing up. 2 Playback will start automatically. If not pressÉÅ. 3 To stop playback, press 9. Programming and tuning to radio stations 1 Press SOURCE (TUNER on the remote) to select tuner source. 2 Press PROG/ANGLE for more than two seconds to program all available stations in order of waveband. 3 Press PRESETí/ë until the