Philips MCD295/12の取扱説明書

ページ1に含まれる内容の要旨

1
Quick Start Guide
2
User Manual
MCD295
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
Remote control with two
Quick Start Guide
Composite Video Cable
AA batteries
PRO
MW antenna FM antenna User Manual
MCD295 QUG_Eng 1 2005.12.27, 16:37

ページ2に含まれる内容の要旨

1 Connect the speaker cables. 2 Connect the MW antenna. Tip 3 See the User Manual for other TV Connect the composite video cable to a TV. connection options. 4 Connect the power cords of the system and TV. 4 FM wire antenna MW loop AC power cord antenna 2 3 3 Speaker Speaker (right) (left) 1 4 AC power cord Setting up the TV 1 Press SOURCE (DISC on the remote) to select disc source. 2 Turn on the TV and set it to the correct Video In channel. MCD295 QUG_Eng 2 2005.12.27, 16:37

ページ3に含まれる内容の要旨

Setting the clock 1 In standby mode, press and hold CLOCK/RDS on the system. 2 When the hour digits flash, turn the VOLUME control on the front panel or press VOLUME +/- on the remote to set the hours. 3 Press CLOCK/RDS again and the minute digits flash. Then turn the VOLUME control on the front panel or press VOLUME +/- on the remote to set the minutes. 4 Press CLOCK/RDS again to confirm the time setting. Setting system menu options Tip See chapters "Preparations" and "System Menu Options" in t

ページ4に含まれる内容の要旨

Playing a disc 1 Press OPEN•CLOSE3 to open the disc tray and load in a disc, then press the same button again to close the disc tray. ➜ Make sure the label side of the disc is facing up. 2 Playback will start automatically. If not press PLAY/PAUSEÉÅ. 3 To stop playback, press STOP 9. Programming and tuning to radio stations 1 Press SOURCE (TUNER on the remote) to select tuner source. 2 Press PROGRAM for more than two seconds to program all available stations in order of waveband. 3 Press PRESETí