ページ1に含まれる内容の要旨
MCD288
DVD Micro Theatre
ページ2に含まれる内容の要旨
Important notes for users in the U.K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 Remove fuse cover and fuse. 2 Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type. 3 Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug
ページ3に含まれる内容の要旨
3
ページ4に含まれる内容の要旨
ª 1 4 ™ ¡ $ £ 5 6 8 7 7 9 8 ∞ º ) 0 # ⁄ @ ! • & ( * ^ 2 % ≤ 3 § ≥ 4
ページ5に含まれる内容の要旨
Index English ------------------------------------------------ 6 Manufactured under license from Dolby This product incorporates copyright protection Laboratories. technology that is protected by method claims of certain U.S. patents and other intellectual "Dolby", "Pro Logic" and the double-D symbol property rights owned by Macrovision are trademarks of Dolby Laboratories. Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporat
ページ6に含まれる内容の要旨
Language Code Abkhazian 6566 Inupiaq 7375 Pushto 8083 Afar 6565 Irish 7165 Russian 8285 Afrikaans 6570 Íslenska 7383 Quechua 8185 Amharic 6577 Italiano 7384 Raeto-Romance 8277 Arabic 6582 Ivrit 7269 Romanian 8279 Armenian 7289 Japanese 7465 Rundi 8278 Assamese 6583 Javanese 7486 Samoan 8377 Avestan 6569 Kalaallisut 7576 Sango 8371 Aymara 6589 Kannada 7578 Sanskrit 8365 Azerhaijani 6590 Kashmiri 7583 Sardinian 8367 Bahasa Melayu 7783 Kazakh 7575 Serbian 8382 Bashkir 6665 Kernewek
ページ7に含まれる内容の要旨
Contents General Information Disc Operations Features .................................................................. 9 Playing discs ......................................................... 25 Discs for playback ................................................ 9 Using the disc menu .......................................... 25 Supplied accessories .......................................... 10 Basic playback controls ............................... 25-27 Environmental information ...........
ページ8に含まれる内容の要旨
English Contents System Menu Options Basic operations ................................................. 30 SYSTEM SETUP ............................................ 30-32 TV SYSTEM SCREEN SAVER TV TYPE PASSWORD RATING DEFAULT DIVX(R) VOD registration code LANGUAGE SETUP .......................................... 32 VIDEO SETUP .............................................. 32-33 BRIGHTNESS CONTRAST HUE SATURATION AUDIO SETUP ................................................... 33 DIGITAL OUT DOWN
ページ9に含まれる内容の要旨
General Information – DivX 3.11, 4.x and 5.x Features – Supported MP3-CD format. Your DVD Micro Theatre with 2.1 channel full • ISO 9660 / UDF format digital amplifier creates the same dynamic • Max. title/album name –10 characters sound qualities that you find in full-fledged • Max. title number plus album is 255. cinemas and incorporates some of the best • Max. nested directory is 8 levels. features in home theater technology. • The max. album number is 32. • The max. MP3 track number is 999.
ページ10に含まれる内容の要旨
English General Information/Maintenance Do not block the vents Supplied accessories ● Do not operate the system in an enclosed – A/V cord (R/W/Y) cabinet and allow about 10 cm (4 inches) of free – FM wire antenna space all around the player for adequate – External video box ventilation. – Power cord ● The ventilation should not be impeded by – 15-pin D-Sub cable covering the ventilation openings with items, – Stand such as newspapers table-cloths, curtains, etc. – Remote Control and two AAA batt
ページ11に含まれる内容の要旨
Installation R AC power cord Speaker Speaker (left) (right) FM wire antenna IMPORTANT! – The type plate is located at the rear of To avoid overheating of the system, a safety the system. circuit has been built in. Therefore, your – The voltage selector located at the system may switch to Standby mode bottom of the subwoofer is preset at automatically under extreme conditions. If 220V-240V from the factory. For this happens, let the system cool down countries that operate at 110V-127V, before reu
ページ12に含まれる内容の要旨
English Installation Step 1: Connecting speakers Step 2: FM antenna connection Connect the supplied FM antenna to the FM AERIAL terminal. Fully extend and adjust the position of the antenna for optimal reception. 1 Place the main set with the front side facing down on a flat and firm surface. Then remove ● For better FM stereo reception, connect an the detachable cover on the back of the set to outdoor FM antenna to the FM AERIAL (FM expose the terminals available for connection. ANTENNA) termin
ページ13に含まれる内容の要旨
Installation Using the video box Step 3: Connecting TV The supplied video box provides you with more TV connection options. IMPORTANT! – You only need to make one video ● First connect the 9-pin connector of the connection from the following options, supplied video box to the CONNECT TO depending on the capabilities of your TV. VIDEO BOX jack on the back of the set by – Connect the DVD system directly to matching the pins. the TV . Using AV OUT jack R Using Composite Video jack R 1 Connect the e
ページ14に含まれる内容の要旨
English Installation Using Component Video jacks (Y Pb Pr) Using S-Video jack IMPORTANT! IMPORTANT! – The progressive scan video quality is – If S-Video is used for DVD playback only possible when using Y Pb Pr, and a connection, the system's VIDEO OUT progressive scan TV is required. setting will need to be changed accordingly. R R ● Use an S-Video cable (not supplied) to connect the S-VIDEO OUT jack to the S-Video input jack (or labeled as Y/C or S-VHS) on the TV. 1 Use component video cables
ページ15に含まれる内容の要旨
Installation Using an accessory RF modulator Step 4: Placing the set and IMPORTANT! speakers – If your TV only has a single Antenna In 1 After finishing all rear connections, mount the jack (labeled as 75 ohm or RF In), you detachable cover on the back of the set until will need an RF modulator in order to hearing a click to avoid cable clutter. view DVD playback on the TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations. ANT IN RF coaxial
ページ16に含まれる内容の要旨
English Installation Using the VCR for recording DVDs Step 5: Connecting the power cord After everything is connected properly, VIDEO IN plug in the AC power cord to the power outlet. AUDIO IN L Never make or change any connection with the VCR R power switched on. Optional: Connecting additional equipment Listening to the playback of a non-USB device AUDIO OUT L R VCR (for example) 1 Connect the end of the supplied AV cord with only one connector to the AV OUT jack of the DVD system. 2 For the o
ページ17に含まれる内容の要旨
Installation Recording (digital) Connecting a USB device or memory card IMPORTANT! – Before connecting the USB plug, first slide down the movable baffle as shown on Page 3 to expose the jack. By connecting a USB mass storage device (including USB flash memory, USB flash players or memory cards) to the Hi-Fi system, you can enjoy the device's stored music through the powerful speakers of Hi-Fi system. ● Insert the USB device's USB plug into the socket on the set. ● Connect the COAXIAL (DIGITAL
ページ18に含まれる内容の要旨
English Controls Controls on the system 0 AUX-IN – connects an external non-USB device. 1 STANDBY-ON y – switches the system on or to standby mode. ! USB DIRECT – jack for the external USB mass storage device. 2 iR sensor – infrared sensor for remote control. @ SLIDE OPEN 4 – slides down to expose some buttons and jacks 3 PROGRAM on the front panel. – DVD/VCD/CD/MP3-CD/USB: enters the program menu. – Picture CD: during playback, to select a slide Controls on the remote control show mode. 1 STAND
ページ19に含まれる内容の要旨
Controls 9 OK ™ A-B – to exit or confirm the selection. – for VCD/CD/USB: to repeat a specific section within the same track. 0í/ë – for DVD: to repeat a specific section in a disc. – Disc: skips to the previous/next chapter/title/ £ DIM track. – selects different levels of brightness for the – Tuner: selects a preset radio station. display screen. ! 9 ≤ AUDIO – In DISC/USB mode, to stop playback or clear a for VCD program. – sets Stereo, Mono-Left or Mono-Right sound @ 2; mode. – In DISC/USB mo
ページ20に含まれる内容の要旨
English Preparations IMPORTANT! Step 2: Setting the clock – Make sure to complete the preparation procedures before operating 1 Go to Standby mode. the system. 2 Press and hold CLOCK on the remote. ➜ “CLOCK SET” is displayed briefly. Then, the Step 1: Inserting batteries into hour digits flash on the display screen. the Remote Control 3 Press VOLUME -/+ (VOL +/- on the remote) 3 to set the hours. 1 4 Press CLOCK again. ➜ The minute digits flash on the display screen. 2 5 Press VOLUME -/+ (VOL +/
