ページ1に含まれる内容の要旨
1
Quick Start Guide
2
User Manual
MCD109
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
DISC AUX DISPLAY SLOW
OSD
SUBTITLE REPEAT A-B SHUFFLE
SYSTEM MENU DISC MENU
OK
CR2025
AUDIO MUTE
+
VOL
1 2 3 GOTO
4 5 6 ZOOM
7 8 9 DSC
PROG ANGLE
0 DBB Remove the insulation plastic tab
Remote control with one
Composite video cable DIN cable
before use
CR2025 battery loaded
AC power cord Quick start guide User manual
MCD109_55 QSG_Eng 1 24/8/06, 15:18
ページ2に含まれる内容の要旨
1 Important! Connect the speaker wires of the right speaker to the left speaker. – This set can only be operated after the supplied DIN cable has been connected. 2 – Before connecting the AC power cord Connect the left speaker and the DVD player by using the supplied to the wall socket, make sure that the DIN cable. VOLTAGE SELECTOR (located on the rear of the left speaker) is adjusted to match 3 the local power voltage. Connect the DVD player to your TV by using the supplied composite video cab
ページ3に含まれる内容の要旨
DISC AUX DISPLAY SLOW OSD Setting up the TV SUBTITLE REPEAT A-B SHUFFLE SYSTEM MENU DISC MENU 1 Press SOURCE (DISC on the remote) to select disc source. OK 2 AUDIO MUTE Turn on the TV and set it to the correct Video In channel. + VOL 1 2 3 GOTO 4 5 6 ZOOM 7 8 9 DSC PROG ANGLE 0 DBB Setting DVD menu options IMPORTANT! If the progressive scan feature is activated but the connected TV does not support progressive signals or the video cables are not connected accordingly, see the user manual for pro
ページ4に含まれる内容の要旨
Playing a disc 1 Push OPEN /CLOSEç to open the disc door. 2 Load in a disc with the label side facing up, then close the disc door. 3 Playback will start automatically. If not, pressÉÅ. 4 To stop playback, press 9. Notes for the remote control: Tip – First, select the source you wish to Detailed playback features and control by pressing one of the source select additional functions are described in the keys on the remote control (DISC or AUX, for example). accompanied user manual. – Then select
