ページ1に含まれる内容の要旨
Contents
Before Using Your DVD Player 2
DVD AUDIO/VIDEO PLAYER
Getting Started
DV-S757
Instruction Manual
Basic Playback
Advanced Playback
Thank you for purchasing the ONKYO DVD AUDIO/
VIDEO PLAYER.
Function Setup
Please read this manual thoroughly before making
connections and plugging in the unit.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new DVD AUDIO/VIDEO
PLAYER.
Please retain this manual for future reference.
O
ページ2に含まれる内容の要旨
WARNING: WARNING AVIS TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE DO NOT OPEN NE PAS OUVRIR DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated CAUTION: “dangerous voltage” within the product’s enclosure that may be of TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT sufficient magnitude to constitute a risk of
ページ3に含まれる内容の要旨
Precautions This unit contains a semiconductor laser system and is classified The label on the right as a “CLASS 1 LASER PRODUCT”. So, to use this model is applied on the rear properly, read this Instruction Manual carefully. In case of any panel except for USA “CLASS 1 LASER trouble, please contact the store where you purchased the unit. and Canadian PRODUCT” To prevent being exposed to the laser beam, do not try to open models. the enclosure. CAUTION: 1. This unit is a CLASS 1 LASER PRODUCT a
ページ4に含まれる内容の要旨
Precautions 1. Regional Restriction Codes (Region Number) 8. Notes on Handling Regional restriction codes are built into DVD Players and DVD- • When shipping the unit, use the original shipping carton and Video media for each sales region. If the regional code of the packing materials. For maximum protection, repack the unit as DVD Player does not match one of the regional codes on the it was originally packed at the factory. DVD-Video, playback is not possible. • Do not use volatile liquids, su
ページ5に含まれる内容の要旨
Notes on Discs This section shows you how to handle, clean, and store discs. The Structure of the Disc Content Playable Discs This DVD Player can playback the following discs. DVD-Video Normally, the contents of DVD-Video are divided into titles, Disc mark and the titles are subdivided into chapters. *1 *2 Title 1 Title 2 DVD videos Chapter 1 Chapter 1 Chapter 2 Chapter 2 Chapter 3 DVD Audio DVD-Audio The contents of DVD-Audio are divided into groups, and the groups are subdivided into tracks. V
ページ6に含まれる内容の要旨
Notes on Discs MP3 compatibility information Handling Discs • Do not touch the playback side of the disc. • The CD-ROM must be ISO 9660 compatible. • Files should be MPEG1 Audio Layer 3 format, 44.1 or 48kHz, fixed bit-rate. Incompatible files will not play and “UNPLAYABLE MP3 FORMAT” will be displayed. • Not compatible with variable bit-rate (VBR) files. • This system only plays tracks that are named with the file Playback side extension “.mp3” or “.MP3”. • This system is not compatible with mu
ページ7に含まれる内容の要旨
Table of Contents Important Safeguards/Precautions/Notes on Discs/Table of Contents ............. 2–7 Getting Started Features/Supplied Accessories ............................................................................. 8 Preparing the Remote Controller .......................................................................... 9 Index to Parts and Controls ................................................................................ 10 Connecting to a TV ................................
ページ8に含まれる内容の要旨
Getting Started Features/Supplied Accessories Features 1 1 * Manufactured under licence from Lucasfilm Ltd. Lucasfilm and THX* Ultra Certified THX are trademarks of Lucasfilm Ltd. 2 3 DTS* /Dolby Digital* /MPEG2/PCM Digital Audio Outputs 2 * “DTS” and “DTS Digital Surround” are trademarks of Digital Advanced 192-kHz/24-Bit D/A Converters Theater Systems, Inc. 3 Manufactured under license from Dolby Laboratories. * Video CD Capability “Dolby”, “Pro Logic” and the double-D symbol Ÿ are 54-MHz/10-b
ページ9に含まれる内容の要旨
Preparing the Remote Controller Inserting the Batteries Using the Remote Controller Point the remote controller toward the remote control 1 Open the battery compartment cover. sensor. Remote control sensor 30˚ 30˚ 2 Insert the two R6 (size AA) batteries. Be sure to match the + and – ends of the batteries with the diagram inside the battery compartment. Notes • Place the unit away from strong light such as direct sunlight or inverted fluorescent light which can prevent proper operation of the rem
ページ10に含まれる内容の要旨
Index to Parts and Controls For operational instructions, see the page indicated in brackets [ ]. Front panel 78 90-= ~ ! 12 34 5 6 @$ #%^&* ( ) _ 1 POWER switch and STANDBY indicator [16] -0 button [21, 24] Turns on the main power supply for the DV-S757. The DV-S757 Press to open and close the disc tray. enters standby state and the STANDBY indicator lights up. = 8 PAUSE button [25, 30] Pressing the switch again to the off position (— OFF) shuts down Press during playback to pause. Press aga
ページ11に含まれる内容の要旨
Display 12 34 5 67 8 90 REPEAT L C R LFE LAST DVD - AUDIOVC D TITLE GROUP CHAPTER TRACK REMAIN LS RS D.MIX COND. D DTS GUI -=~ ! 1£/8 indicator 9 LAST indicator 2 Inserted disc indicator 0 COND. indicator 3 TITLE/GROUP indicator -ŸD indicator 4 Angle icon indicator = DTS indicator 5 CHAPTER/TRACK indicator ~ GUI (Graphical User Interface) indicator 6 REPEAT indicator Indicates an on-screen menu operation is being performed. On- 7 REMAIN indicator screen menu helps you set up the player. 8 L, C
ページ12に含まれる内容の要旨
Index to Parts and Controls Remote controller - FR/FF 1/¡ buttons [23] ON OPEN / CLOSE During playback of DVD and Video CD, press ¡ to perform fast 1 @ STANDBY ANGLE AUDIO SUBTITLE forward scanning or 1 to perform fast reverse scanning of DVD 2 # and Video CD. When a CD or MP3 is loaded, audio scanning is 3 LAST M COND. M DIMMER DISPLAY $ 4 % performed. 5 TOP MENU MENU ^ 6 & = Number buttons (1-9, 0, +10)* [21, 22, 26, 30-32, 55, 57, 58] * Use to perform direct title/folder and chapter/track se
ページ13に含まれる内容の要旨
Connecting to a TV Before connecting Incomplete • Refer also to the instruction manual of the TV. • Connect the plugs securely. • When you connect the DVD Player to the TV, be sure to turn off the power and unplug both units from the mains before making any connections. • Connect the DVD Player to the TV directly. If you connect the DVD Player to a VCR, TV/VCR combination, or video selector, the playback picture may be distorted as DVD videos are copy protected. Insert completely Using the suppl
ページ14に含まれる内容の要旨
Connecting to a TV Making component video connections If the TV or monitor has component video inputs, making this type of video connection will produce the ideal picture BE sure to set the TV Aspect after connection using quality for the presentation of DVD-Video. Using a the Setup Navigator explained in “Setting Up the component video cable (sold separately), connect the Player” starting on page 17 or the function setting VIDEO OUTPUT COMPONENT jacks to the corresponding menu explained in “Ad
ページ15に含まれる内容の要旨
Connecting to an Amplifier (To Enjoy the Sound Advantage of the DVD Player) Although you can reproduce the DVD Player’s sound from the TV speakers with the connections on pages 13 and 14, connecting with an amplifier provides you high quality dynamic sounds. Before connecting Notes • The remote controller supplied with Onkyo amplifier can be used • Refer to the instruction manual of the amplifier. to operate the DVD player. • When you connect the DVD Player to the amplifier, be sure to turn off
ページ16に含まれる内容の要旨
Connecting the Power/ Turning on the DVD Player Before connecting • The DV-S757 is shipped with the main power (POWER) switch in the on position (_ ON). When the power cord is plugged in for the first time, the DV-S757 will automatically enter the standby state and the STANDBY indicator will light (same condition after step 2 below). • Make sure that all the connections on pages 13-15 are complete (the connection to a TV is required). Setting the TV System Plug the supplied power cord into 1 T
ページ17に含まれる内容の要旨
ON OPEN / CLOSE ON STANDBY ANGLE AUDIO SUBTITLE LAST M COND. M DIMMER DISPLAY Setting Up the Player TOP MENU MENU 5/∞ ENTER ENTER The Setup Navigator has been designed to simplify the RETURN SETUP process of getting the DVD player ready to perform. SETUP PAUSE STOP Designed as a series of on-screen multiple-choice PLAY 7 FR FF DOWN UP questions, the Setup Navigator automatically sets the STEP/ SLOW audio, video, and language settings according to how 1 23 + the questions are answered. Once this
ページ18に含まれる内容の要旨
Setting Up the Player Using the Setup Navigator Setting the OSD Language Setting the type of analog audio (On-Screen Display Language) connections The [OSD Language] screen establishes the OSD language, The [Amp Connection] screen establishes the type of analog or on-screen display language, which refers to the language audio connection you made to your amplifier/receiver. that is used by the player in menus and Audio1 A2 Video1 V2 Language General on-screen messages. Additionally, the langu
ページ19に含まれる内容の要旨
Confirming the settings Setting digital audio connections to an AV amplifier or decoder The [Exit Setup Navigator] is the final screen in the Setup Navigator. The [Digital Jack] screen establishes whether digital connections have been made to an AV amplifier, receiver, or Audio1 A2 Video1 V2 Language General external decoder. As there are numerous options available, Setup Navigator please refer to the instructions supplied with the component Save Changes the player is connected to determine
ページ20に含まれる内容の要旨
Setting Up the Player Various sound formats and sound effects Minimum speaker configuration for DTS/Dolby Digital/MPEG2 surround sounds Center Speaker Left front Right speaker front speaker Left Right surround surround speaker speaker The 5.1-channel digital surround format of DOLBY DIGITAL/ DTS/MPEG2 enables you to individually play five full-range (20 Hz-20 kHz) channels (left and right front, center, two surround channels) plus an LFE (Low Frequency Effect) channel for the low-range effect so
