ページ1に含まれる内容の要旨
OWNER’S MANUAL
NETWORK BLU-RAY
DISC™ / DVD PLAYER
Please read this manual carefully before operating
your set and retain it for future reference.
BD630C
P/NO : SAC35093503
www.lg.com
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Getting Started 1 Getting Started Getting Started 3 Safety Information CAUTION CAUTION: This product employs a Laser System. 1 RISK OF ELECTRIC SHOCK To ensure proper use of this product, please read DO NOT OPEN this owner’s manual carefully and retain it for future CAUTION: TO REDUCE THE RISK OF ELECTRIC reference. Shall the unit require maintenance, SHOCK DO NOT REMOVE COVER (OR BACK) NO contact an authorized service center. USER-SERVICEABLE PARTS INSIDE REFER SERVICING Use of control
ページ4に含まれる内容の要旨
Getting Started 4 Getting Started This device is equipped with a portable battery or accumulator. Safety way to remove the battery or the battery from the equipment: Remove the 1 old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do not dispose of batteries
ページ5に含まれる内容の要旨
Getting Started Getting Started 5 Notes on Copyrights IMPORTANT SAFETY y Because AACS (Advanced Access Content System) is approved as content protection INSTRUCTIONS system for BD format, similar to use of CSS 1. Read these instructions. 1 (Content Scramble System) for DVD format, 2. Keep these instructions. certain restrictions are imposed on playback, analog signal output, etc., of AACS protected 3. Heed all warnings. contents. The operation of this product and 4. Follow all instructio
ページ6に含まれる内容の要旨
6 Table of Contents 23 – Adjust the Setup Settings Table of Contents 23 – [DISPLAY] Menu 24 – [LANGUAGE] Menu 25 – [AUDIO] Menu 26 – [LOCK] Menu 1 Getting Started 27 – [NETWORK] Menu 28 – [OTHERS] Menu 3 Safety Information 8 Introduction 8 – Playable Discs and symbols used in 4 Operating this manual 9 – About the “7” Symbol Display 29 General Playback 9 – Supplied Accessorries 29 – Using [HOME] menu 10 – File compatibility 29 – Playing a Disc 11 – AVCHD (Advanced Video Codec High 29 – Playi
ページ7に含まれる内容の要旨
Table of Contents 7 5 Troubleshooting 41 Troubleshooting 41 – General 42 – Picture 1 42 – Sound 43 – Network 43 – Customer Support 43 – Open source software notice 2 6 Appendix 44 Controlling a TV with the Supplied Remote Control 3 44 – Setting up the remote to control your TV 45 Network Software Update 45 – Network update notification 45 – Software Update 4 47 Area Code List 48 Language Code List 49 Trademarks and Licenses 50 Audio Output Specifications 52 Video Output Resolution 5 53 Specif
ページ8に含まれる内容の要旨
Getting Started 8 Getting Started Introduction 1 Playable Discs and symbols used in this manual Media/Term Logo Symbol Description y Discs such as movies that can be purchased or rented. e y BD-R/RE discs that are recorded in BDAV format. Blu-ray y BD-R/RE discs that contain Movie, Music or y Photo files. u y ISO 9660+JOLIET, UDF and UDF Bridge format. i y Discs such as movies that can be purchased or rented. r DVD-ROM Video mode and finalized only y DVD-R y Supports the dual layer disc
ページ9に含まれる内容の要旨
Getting Started Getting Started 9 Note , About the “7” Symbol Display y Depending on the conditions of the “7” may appear on your TV display during recording equipment or the CD-R/RW (or operation and indicates that the function explained DVD±R/RW) disc itself, some CD-R/RW (or in this owner’s manual is not available on that DVD±R/RW) discs cannot be played on the 1 specific media. unit. Depending on the recording software & the y finalization, some recorded discs (CD-R/RW, Supplied Ac
ページ10に含まれる内容の要旨
Getting Started 10 Getting Started File compatibility Movie files 1 File File Codec Format Audio Format Subtitle Location Extension “.avi”, “.mpg”, DIVX3.xx, DIVX4.xx, Dolby Digital, SubRip (.srt / .txt), SAMI (.smi), “.mpeg”, “.mkv”, DIVX5.xx, DIVX6.xx DTS, MP3, SubStation Alpha (.ssa/.txt), “.mp4”, “.asf”, (Standard playback WMA, AAC, MicroDVD (.sub/.txt), VobSub Disc, “.wmv”, “.m4v” only) XVID, H.264/ AC3 (.sub), SubViewer 1.0 (.sub), USB (DRM free) MPEG-4 AVC, MPEG1 SubViewer 2.0 (.s
ページ11に含まれる内容の要旨
Getting Started Getting Started 11 Note , AVCHD (Advanced Video y The file name is limited to 180 characters. Codec High Definition) A “avi “file which is encoded “WMV 9 codec” y y This player can playback AVCHD format discs. is not supported. These discs are normally recorded and used in 1 Depending on the size and number of the y camcorders. files, it may take several minutes to read the The AVCHD format is a high definition digital y contents on the media. video camera format. y
ページ12に含まれる内容の要旨
Getting Started 12 Getting Started Certain System Requirements Compatibility Notes For high definition video playback: y Because BD-ROM is a new format, certain disc, digital connection and other compatibility issues High definition display that has COMPONENT or y are possible. If you experience compatibility HDMI input jacks. 1 problems, please contact an authorized BD-ROM disc with high definition content. y Customer Service Center. y HDMI or HDCP capable DVI input on your display y Th
ページ13に含まれる内容の要旨
Getting Started Getting Started 13 Remote control • • • • • • a • • • • • • • • • • • • d • • • • • 1 (POWER): Switches the player ZOOM: Displays or exits the 1 ON or OFF. [Zoom] menu. B (OPEN/CLOSE): Opens and MARKER: Marks any point during closes the disc tray. playback. * : The button is not available for SEARCH: Displays or exits the any function. search menu. TV Control Buttons: See page 44. TITLE/POP-UP: Displays the DVD title menu or BD-ROM’s pop-up 0-9 numerical buttons:
ページ14に含まれる内容の要旨
Getting Started 14 Getting Started Front panel 1 a Disc Tray e N (PLAY / PAUSE) b Display Window f Z (STOP) Remote Sensor (POWER) Button c g 1 d B (OPEN/CLOSE) h USB Port Rear panel a AC power cord e HDMI OUT b VIDEO OUT f DIGITAL AUDIO OUT (COAXIAL) c 2CH AUDIO OUT (Left/Right) g LAN port d COMPONENT VIDEO OUT (Y PB PR)
ページ15に含まれる内容の要旨
Connecting 2 Connecting Connecting 15 HDMI Connection Connecting to Your TV If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable (Type A, High Make one of the following connections, depending TM Speed HDMI Cable). Connect the HDMI jack on on the capabilities of your existing equipment. the player to the HDMI jack on a HDMI compatible y HDMI connection (page 15) TV or monitor. Component Video connection (page 16) y y Video connection (page 17) Note , Rear
ページ16に含まれる内容の要旨
Connecting 16 Connecting Note , Component Video Connection If a connected HDMI device does not accept y Connect the COMPONENT VIDEO OUT jacks on the the audio output of the player, the HDMI player to the corresponding input jacks on the TV device’s audio sound may be distorted or using component video cable. Connect the left and may not output. right AUDIO OUT jacks of the player to the audio y When you use HDMI connection, you can left and right IN jacks on the TV using the audio cha
ページ17に含まれる内容の要旨
Connecting Connecting 17 Video/Audio (Left/Right) Resolution Setting Connection The player provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUT jacks. You Connect the VIDEO OUT jack on the player to the can change the resolution using [Setup] menu. video in jack on the TV using a video cable. Connect 1. Press HOME ( ). n the left and right AUDIO OUT jacks of the player to the audio left and right IN jacks on the TV using the 2. Use a/d to select the [Setup] and press EN
ページ18に含まれる内容の要旨
Connecting 18 Connecting Connect the amplifier’s HDMI output jack to HDMI Connecting to an input jack on your TV using a HDMI cable if your amplifier has HDMI output jack. Amplifier You will need to activate the player’s digital output. (See “[AUDIO] Menu” on pages 25.) Make one of the following connections, depending on the capabilities of your existing equipment. Connecting to an Amplifier via y HDMI Audio connection (page 18) Digital Audio Output Digital Audio connection (page 18) y Co
ページ19に含まれる内容の要旨
Connecting Connecting 19 Connecting to an Amplifier via Connecting to your 2 Channel Audio Output Home Network Connect the Left and Right 2CH AUDIO OUT jacks on the player to the audio left and right in jacks This player can be connected to a local area on your amplifier, receiver, or stereo system using network (LAN) via the LAN port on the rear panel. audio cables. By connecting the unit to a broadband home network, you have access to services such as software updates, BD-Live inter
ページ20に含まれる内容の要旨
Connecting 20 Connecting Broadband service 2. Select [Yes] and press ENTER (b) to continue. The new connection settings reset the current 2 network settings. Router 3. Use w/s/a/d to select the IP mode between [Dynamic] and [Static]. Normally, select [Dynamic] to allocate an IP address automatically. PC Note , If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using w/
