ページ1に含まれる内容の要旨
H-DVD5008-N
DVD PLAYER DVD
Instruction manual
ページ2に含まれる内容の要旨
Contents Contents.........................................................................................................................................2 Importan safeguards......................................................................................................................3 Importannotes..............................................................................................................................4 Features........................................................
ページ3に含まれる内容の要旨
Important safeguards The lightning flash is intended to alert the user to the presence of dangerous voltage within the product's enclosure, and touching the inner parts may result in a risk of electric shock to persons. The exclamatory mark is intended to alert the user to the presence of important operating instructions. To reduce the risk of electric shock or fire, do not open the cover. Refer servicing to qualified service personnel. This mark indicates this unit belongs to class 1 laser prod
ページ4に含まれる内容の要旨
Important notes · Please read through the manual carefully before connection and operation. · Do not open the cover or touch any internal components for non-professional. · Turn off the power when the unit is not being used. (Unplug the power cord if the unit is not used for a long time). · Don't expose this unit to direct sunlight. Keep away the heating sources or equipments. · Don't expose this unit to the rain or moisture. · Place the unit on a horizontal level. Keep the unit ventilate
ページ5に含まれる内容の要旨
Features Thank you for purchasing our product. Please go through this manual carefully before connection and operation. Please keep this manual for future reference. DVD player HYUNDAI is a new generation home player, which can produce high quality video and audio. Its performance is much better than that of any previous home video playing equipment. As the best signal source of home theatre system, it will give you the uppermost enjoyment! · Dolby AC-3, PCM etc. digital audio decoder. · Video D
ページ6に含まれる内容の要旨
Accessories Accessories User manual Remote control A/V Cable Batteries AAA 1.5V Remote controller operation · Insert the batteries into the cell box. The remote control points at remote sensor within 8 meters and within 30 degree at left or right side. · Take the battery out of the controller if it is not used for a long time. This unit can play the following types of discs Disc types Symbol Contents DVD Audio + Video AC-3 Dolb
ページ7に含まれる内容の要旨
Accessories About Disc Terms Title Generally, pictures or music compressed on a DVD are divided into several sections that is TITLE Chapter The smaller section unit of picture or music in a DVD under the title, usually one title is comprised of one or more chapters and each of them is numbered for easy searching. But some discs may not have a recording chapter. Track A segment of picture or music on a SVCD VCD or CD. Each track is numbered for searching Scene VCD with playback control function,
ページ8に含まれる内容の要旨
Panel Front panel 1. Power (standby) button 2. Disc tray 3. LED display 4. Open / Close button 5. Play button 6. Pause button 7. Stop button 8. MIC jacks Rear panel 1. AC Cord 2. 5.1CH Audio (Center, Sub woofer, Surround right/left, mail right/left) 3. Down-mix right/left 4. Composite video output 5. S-Video output 6. Optical digital output 7. VGA output 8. SCART output 9. Component output 10. Coaxial output H-DVD5008-N (www.hyundai-electronics.ru)
ページ9に含まれる内容の要旨
Remote control H-DVD5008-N (www.hyundai-electronics.ru) 9 ENGLISH
ページ10に含まれる内容の要旨
Remote control 1. Power Press to access to or exit from the STANDBY mode. 2. Mute Press to turn on/off the speaker output. 3. Browse Press to advance look through from some small picture, and select the play content. 4. Repeat Press to repeat a chapter, track, title, or all content 5. A-B Repeat Press to mark a segment of A-B to repeat. 6. Subtitle Press to select various language subtitles while playing DVD. 7. Audio Press to close different languages when playing DVD. 8. 0-9 Numbers Under time
ページ11に含まれる内容の要旨
Connection Before connection Disconnect the AC power supply cord. Video system connection The following available video output for this unit. Composite Video Use the AV cable (yellow terminal) to connect composite video output of this unit to the TV/monitor video input. S-Video Use the S-video cable to connect the s-video output of this unit to the TV/monitor S-video input. Component Video (YUV) Use 3-core AV cable to connect the component output terminals of this unit to the corresponding TV/mo
ページ12に含まれる内容の要旨
Connection Audio connection system Two types of audio output systems: analog audio and digital audio. Analog audio includes 2- channel stereo and Dolby AC-3 5.1 channel output. Digital audio includes optical and coaxial output. Stereo audio Use a pair of AV cable (red for right /white for left) to connect the stereo audio output of this unit to the TV or a stereo input of power amplifier. 5.1 CH Analog audio (option) Use 3 pairs of AV cable to connect the 5.1 channel output of this unit to corre
ページ13に含まれる内容の要旨
System Setup Press SETUP key, screen show setup page. In setup mode, press SETUP key again to quit the setup page. Press direction key to the desired item, press ENTER to confirm. (1) Some setup items are concerning the present modes. The items in gray can't be set up. (2) The setup is memorized and kept after power off. GENERAL SETUP PAGE · TV Display 4:3 Panscan: When the unit connects to the normal TV set, the wide-screen image shows on the full screen, but some part is cut off. 4:3 LetterBox
ページ14に含まれる内容の要旨
System Setup AUDIO SETUP Analog audio setup page · DOWNMIX LT/RT: The audio out is Left and Right channels format even if the original sound is 5.1CH format. STEREO :The audio out format is stereo even if the original sound is 5.1CH format. 3D SURROUND: The audio out is virtual surround sounds (only for 5.1CH player) OFF: Turn off downmix function. If playing 5.1CH discs or the unit is connected with 5.1 channel amplifier, this item should be selected.(only for 5.1CH player) · FRONT, CENTER, REA
ページ15に含まれる内容の要旨
System Setup · TEST TONE With 5.1 operating choose On , will check 5 CHs in turn. The checking must be done with no disc in the unit and under the condition of Downmix being with 5.1CH . change 5.1 to OFF Using this function can check all CHs if their linkage with sound box is correct or wrong. · DIALOG With Audio output mode , and choose LT/RT stereo then under the Speaker Setup Page you can select Dialog item and adjust volumes. While playing 5.1CH disc, can adjust speakers volumes vi
ページ16に含まれる内容の要旨
System Setup Dolby digital setup · DUAL MONO Stereo stereo output signal, L-Mono left output signal, R-Mono right output signal, Mix-Mono :left and right output average signal. · DYNAMIC If watching large dynamic scope movie program at night, to select this mode you can reduce the volume to a very low level, at the same time, to keep the fine details sounds. In this case, this doesn't disturb the family and keep the quality sounds. Channel delay (No this setup in 2CH DVD) If the above setups di
ページ17に含まれる内容の要旨
System Setup · EQUALAZER TYPE (No this setup in 2CH DVD) Seven EQ modes are available. You can select one according your preference and the disc content · SELECT BASS BOOST, SUPER BASS OR TREBLE BOOST On means strengthen the corresponding audio. 3D processing ( No this setup in 2CH DVD) In PROLOGIC ON mode, the reverb mode setup is available. The initial factory setup is off. · PRO LOGIC II On means 2CH music switch into 5.1CH music and can by played with multi CHs speakers while in Off status
ページ18に含まれる内容の要旨
System Setup Film At the surrounding CH plus 10ms delay. PRO LOGIC mode imitate PRO LOGIC I adopting logic 2 Auto means auto selecting mode according to a disc type. Only under audio out status, and 5.1CH being chosen can PRO Logic be set. While in PRO Logic , and choosing On can go into next Mode menu. · PANORAMA On means the front stereo extends to both sides, with a better surrounding sense. · DIMENSION Similar as front and rear balance control, adjusting gradually the front and rear sou
ページ19に含まれる内容の要旨
System Setup VIDEO SETUP · VIDEO OUTPUT YUV: set video output in analog component video format when connecting to Y/U/V terminals RGB: set video output in Red/Green/Blue format when connecting to SCART terminals VGA: set to this item when connecting to VGA terminals The player is always with signal output under all conditions, and if it is connected to a component video display equipment, suggesting the linkage be set on OFF . · TV MODE You can choose between progressive and interleaved output
ページ20に含まれる内容の要旨
System Setup PREFERENCE SETUP · TV TYPE This unit is suitable for all kinds of TV systems. You can select one of the PAL, NTSC or MULTI. MULTI: the TV system is auto switched according to the disc system. NTSC: this system is used in USA, TAIWAN, JAPAN etc. PAL: this system is used in CHINA, EUROPE, HONGKONG etc. · PBC To set PBC with On off , PBC On , means the function is available, Off , no function · AUDIO, SUBTITLE, DISC MENU LANGUAGE SETUP These are the initial settings by your preference.
