ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
Important Safety Instructions The lightning flash with an arrowhead symbol, within WARNING the equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to cause an electric shock. The exclamation point within the equilateral triangle is WARNING: TO REDUCE THE RISK OF ELECTRIC intended to alert the user to the presence of important SHOCK, DO NOT REMOVE COVER (OR BACK). NO operating and
ページ3に含まれる内容の要旨
Important Safety Instructions (For USA) 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed. 5. Water and Moisture - The appliance should not be used
ページ4に含まれる内容の要旨
Table of Contents Repeat Playback ................................... 25-26 Important Safety Instruction ..................... 1-2 Repeating a title/chapter (DVD) ............................ 25 Disc Formats ................................................ 4 Repeating a single track/whole disc (CD) ........... 25 Before You Start ........................................... 5 Repeating a specific section (DVD) ...................... 26 Using the remote control ...................................
ページ5に含まれる内容の要旨
Disc Formats The Unit can playback. DVDs [8cm(3")/12cm(5”) disc] Compatible Audio CDs [8cm(3")/12cm(5”) disc] Region Management Information Region Management Information: This Unit is designed and manufactured to respond to the Region Management Information that is encoded on DVD discs. If the Region number printed on the DVD disc does not correspond to the Region number of this Unit, this Unit cannot play that disc. 1 The region number of this Unit is 1. Disc Function or Operation that is Not A
ページ6に含まれる内容の要旨
Before You Start Using the Remote Control • Point the Remote Control at the REMOTE SENSOR located on the Unit. • When there is a strong ambient light source, the performance of the infrared REMOTE SENSOR may be degraded, causing unreliable operation. • The recommended effective distance for remote operation is about 16 feet (5 meters). To install Batteries 1.Open the battery door. 2.Insert two "AA" or UM-3 size batteries. Battery Replacement When batteries become weak, the operating distance of
ページ7に含まれる内容の要旨
Parts and Functions Front Panel 1) Disc tray 8) FUNCTION button Open or close tray by pushing OPEN/CLOSE button. Select the source. Place a disc on the disc tray, label side up. 9) STOP button 2) standby indicator Stop playing a disc. When the Unit is turned on by pressing the POWER/ 10) PAUSE button STANDBY button, the light will illuminate a few Press to pause playback. Each time you press the seconds. If you press the POWER button on the PAUSE button the picture advances one frame. remote co
ページ8に含まれる内容の要旨
Parts and Functions Remote Control 1) POWER / button Turns the Unit on and puts it in standby mode. 2) RETURN button O PEN / POW ER Return to the normal operation after using the SETUP CLOSE RETURN FU NC TIO N menu. 1 3) Number (0 - 9) and (+10) buttons GOTO 2 Use when creating programs, and entering a parental level password. To select numbers over 9, press +10 button and then the second no. for example, to enter 18, press +10 and then 8. 3 4) 5.1 Ch button Switch speaker output to 5.1 channel
ページ9に含まれる内容の要旨
Parts and Functions Remote Control 19) FUNCTION button 19 Display the FUNCTION screen where you can check O PEN / or change various setting. POW ER CLOSE 20) OPEN / CLOSE button RETURN FU NC TIO N 20 Use to open or close the disc tray. GOTO 21) GOTO button 21 Skip directly to a specific location on a DVD disc. 22) SOUND button Selects sound balance and tone controls for adjustment with the cursor buttons. 23) 2.1 CH button MEMO RY 5.1 CH 2.1 CH SOUND Switch speaker outputs to 2.1 channel. (Front
ページ10に含まれる内容の要旨
Display Front Panel Display MEMORY ANGLE indicator CHAPTER / TRACK indicator REPEAT 1 Appears when multiple camera angles indicator When a DVD is loaded in the playback are recorded in the section of the DVD Displayed Unit, this indicator appears indicator that is currently playing. during along with the chapter number. Displayed programmed When a Audio CD is loaded in during playback. the Unit, this indicator appears R. TOTAL(REMAIN.TOTAL) repeat along with the track number. indicator playback.
ページ11に含まれる内容の要旨
Setup FM antenna For better reception FM Connect FM antenna (included) to the FM ANTENNA jacks. AM Connect the loop antenna To wall outlet (included) to the AM LOOP ANTENNA terminals. AM(MW) LOOP ANTENNA (SUPPLIED) A.Connecting your TV The Unit can be connected to your TV in several different ways, depending on the design of your TV. RCA Audio/Video Jacks Use the included Audio/Video cable. 1. Connect the VIDEO OUT and left/right AUDIO OUT jacks to the VIDEO and left/right AUDIO IN jacks on your
ページ12に含まれる内容の要旨
Setup B. Connecting a VCR 1.Using the supplied Audio/Video cable, connect the yellow plug from VIDEO OUT jack on your Unit to VIDEO IN jack on your TV, connect the left and right AUDIO OUT jacks on your Unit to AUDIO IN jacks on your TV. If you want the sound come from the speakers of the Main Unit, you need not to connect these left and right Audio cable from the Main Unit to your TV. 2. Using the Video cable (not supplied), connect the VIDEO IN (VCR) jack on your Unit to VIDEO OUT jack on you
ページ13に含まれる内容の要旨
Setup C. Connecting another source Using the supplied Audio/Video able, connect ONLY the left and right AUDIO OUT jack on your Unit to the AUDIO IN jack or use a coaxial digital Audio cable (not supplied) to connect to the coaxial in jack on your another equipment. Do not connect the yellow video plug. Listening to another audio equipment 1.Turn on the Unit. 2.Turn on your audio equipment and follow the instructions included with it to select the AUDIO IN or DIGITAL IN function. Analogue connect
ページ14に含まれる内容の要旨
Setup D. Connecting the speakers & subwoofer 1. The speaker cords have been color-coded to simplify connection. Just plug the POSITIVE (+) and NEGATIVE (-) ends of each speaker wire into the corresponding jacks on the rear of the Unit, matching the color tube on the end of the speaker wire to the color-coded connector. 2. Connect each of the speaker wires to the satellite speakers. The front left/right and rear left/right speakers are all the same. However, make sure you connect to the center sp
ページ15に含まれる内容の要旨
Setup Mounting rear surround speakers 1) Mark the correct mounting position on the wall. 2) Insert a fixing screw(s) at the marked position on the wall. 3) Align the slot hole(s) of the speaker over the screw and pull the speaker downward until it is firmly hooked. Need More Help? DO NOT RETURN THIS TO THE STORE Please call Customer Service at 1-800-252-6123 or visit online help at http://www.18002526123.com Turning on the Unit and TV 1)Press the POWER button to turn the Unit ON, or 2)Press the
ページ16に含まれる内容の要旨
Adjusting the Sound To adjust the surround sound balance while Pro Logic decoding is in effect Use the remote control to make the following changes to speaker balance: Front speaker (left) • Press the SOUND button repeatedly to display LEFT, then press the or CURSOR button to adjust the sound level. It will show on the display of the Unit. Front speaker (right) • Press the SOUND button repeatedly to display RIGHT, then press the or CURSOR button toadjust the sound level. It will show on the
ページ17に含まれる内容の要旨
Adjusting the Sound To select the listening channel 1.When the disc is stopped, you can press 5.1 CH and 2.1 CH buttons on the remote control to select different speakers output status shown as below table. 2.At AV_IN function mode, you also can press the PRO LOGIC button repeatedly on the remote control to select 3 STEREO, PRO LOGIC (indicator on the front panel will illuminate) or OFF three different speakers output status, Details please refer to below listed table. 3.You can active or off
ページ18に含まれる内容の要旨
DVD CD Playing a Disc Basic playback This owner’s manual explains the basic instructions of this DVD Unit. Some DVD discs are produced in a manner that allows specific or limited operation during playback. As such, the DVD Unit may not respond to all operating commands. This is not a defect in the DVD Unit. Refer to the instruction notes of discs. “ ” may appear on the TV screen during operation. A “ ” means that the desired operation is not permitted by the DVD Unit or the disc. Playing a Dis
ページ19に含まれる内容の要旨
Playing a Disc DVD CD Fast Forward/Fast Reverse 1. Press the TUNING or TUNING button when a disc is playing. • The disc begins fast scan at x2 speed. • Four speeds are available. Each time TUNING or TUNING button is pressed, the speed of fast scan changes in the following sequence: Note : You also can press and hold SKIP button on front panel repeatedly to select different fast scan speed. 2.Press the PLAY button when you reach the desired point to resume playback at normal speed. DVD S
ページ20に含まれる内容の要旨
DVD Playing a Disc Angle selection Some DVDs contain scenes which have been shot from a number of different angles. For these discs, the same scene can be viewed from each of these different angles. 1.While you are playing a DVD with different angles recorded, press the ANGLE button to view the number of the current angle. 2.Press the ANGLE button repeatedly to change the scene to the next angle in those recorded. • About two seconds later, playback continues from the new angle you selected. • I
