ページ1に含まれる内容の要旨
AVD300
SLOT-IN DVD Player
Owner’s Manual
ページ2に含まれる内容の要旨
A . Welcome Thank you for choosing the AVD300 DVD Player. The AVD300 is de- signed to optimize the enjoyment of your favorite DVDs in the mobile environment. This DVD Player is constructed to provide years of reli- able, trouble-free service. Please read this manual thoroughly prior to operating the player and retain it for future reference. B. Precautions EXPLANATION OF GRAPHIC SYMBOLS The lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to t
ページ3に含まれる内容の要旨
SAFETY PRECAUTION For safety reasons, when changing video media, it is recommended that the vehicle is not in motion, and that you do not allow children to unfasten seat-belts to change video media or make any adjustments to the system. Enjoy your entertainment system but always remember the safety of all passengers remains the number one priority. IMPORTANT NOTICE It is unlawful in most jurisdictions for a person to drive a motor vehicle which is equipped with a television viewer or screen
ページ4に含まれる内容の要旨
4. DISC Do not use irregularly shaped discs such as heart or star-shaped discs as they may cause the unit to malfunction. Do not stick paper, tape or glue on the disc. Do not expose the disc to direct sunlight or heat sources such as hot air ducts. Do not touch the surface of the disc. Handle the disc by its edge. Clean the disc by wiping the disc from the center out with a soft lint free cleaning cloth. Remove the disc from the unit and store it in its case after playing. Some playback operatio
ページ5に含まれる内容の要旨
C. Contents 1. Main Unit 2. Remote control with one CR2025 Battery 3. Power Cable 4. Two (2) Brackets with four (4) Screws 5. Owner's Manual 6. Power Adaptor* (4-Pin to 2-Pin) Cable 7. DVRCA * Adaptor for connection to a second monitor 8. RCA Cables ( Red, Yellow, and White) * For use with 8010730 Accessory Cable D. Controls Main Unit (Refer to Figure 1) 10 1. Power Button 11 2. Menu Button 3. Previous Button 4. Play & NAV Up, Down, 1 2 3 4 56 78 9 Left, Right Button 5. Next Button 6. Sto
ページ6に含まれる内容の要旨
E. Remote Control View (Refer to Figure 2) 1) Power Button 2) Display Button 3) Angle Button 4) Subtitle Button 5) Audio Button 6) Zoom Button 7) Up/Down/Left/Right / Enter Buttons 8) Menu Button 9) Return Button 10) A-B Button 11) Forward Button 12) Reverse Button 13) Slow Button 14) Stop Button 15) Eject Button 16) Number Buttons 17) Setup Button 18) Repeat Button 19) Skip- Button (Previous) 20) Skip+ Button (Next) 21) Play Button 22) Pause Button Fi
ページ7に含まれる内容の要旨
F. Connections MMH56B/T/G REMOTE IR RECEIVER 12VDC S-VIDEO OUTPUT VIDEO L AUDIO R MONITOR1 MONITOR2 INPUT A/V OUTPUT RED BLACK SWITCHED GROUND 12VDC Figure 3 1. Powering Your DVD Player ( Refer to Figure 3) Connect the black wire (-) to the vehicle ground. Connect the red wire (+) to a switched (Accessory) 12VDC source. Plug the other end into the 12VDC input jack on the rear of the unit. 2. Remote IR Receiver ( Refer to Figure 3) Plug the 1/8” jack on the remote IR cable into the IR IN jac
ページ8に含まれる内容の要旨
AUDIOVOX DVRCA Figure 4 3. Connecting to an Audiovox Overhead Monitor a. The AVD300 can be connected to Audiovox Overhead monitors with the supplied adaptors (DVRCA and 4 pin to 2 pin power adapter) when using the Audiovox accessory cable (part number 8010730). Plug in the 3 RCA jacks, white (left audio) to white, red (right audio) to red, and yellow (video) to yellow. Connect the 2 pin IR jacks. Connect the 4 pin to the 2 pin power adapter, 4 pin to the accessory cable and the plug into the
ページ9に含まれる内容の要旨
Figure 5 b. Connect any of the two monitor ports on the back of the DVD player directly to the Movies To Go headrest hoods Model MMH56 B/T/G. This is plug and play, power, audio, video and IR signals are supplied in one DIN cable. c. If your TV has an S Video input connector, connect the DVD Player using the S-VIDEO connector. This connection will have a better picture. Refer to the owner's manual supplied with the TV to be used. d. Using the supplied adapter (Part Number DVRCA) the monit
ページ10に含まれる内容の要旨
1. Basic Operation POWER Turn the unit on/off EJECT Eject/load the disc PLAY Start Playback SLOW Play at 1/2, 1/4, or 1/8 times speed PAUSE Still Picture STOP (1 time) Stop at the present playing point / (2 times) Stop playing NEXT Go to the next chapter, track or scene during play back. PREVIOUS Go back to the preceding chapter, track or scene during play back. FORWARD Scan forward at 2, 4, 6, or 8 times speed REVERSE Scan backward at 2, 4, 6, or 8 times speed UP/DOWN/LEFT Used for Menu Navigat
ページ11に含まれる内容の要旨
2. MENU A DVD is divided into sections called titles and chapters. When you play a DVD, a root menu of the disc will appear on the screen of your TV or Monitor. The contents of the menu vary from disc to disc. Press MENU during playing to display the menu, and press ENTER or PLAY to start playing. Some DVDs only allow you to select disc playback options using the DVD menu. 3. DISPLAY (Display contents vary from disc to disc.) 1) PLAYING TIME AND REMAINING TIME a. During playback press ‘D
ページ12に含まれる内容の要旨
c. Press ‘DISPLAY’ the 3rd time to display the Elapsed Time for the chapter. The heading will disappear automatically in about 3 seconds. Chapter Elapsed Time Screen Display d. Press ‘DISPLAY’ the 4th time to display the Remaining Time for the chapter. The heading will disappear automatically after 3 seconds. Chapter Remaining Time Screen Display e. Press ‘DISPLAY’ a 5th time to exit. 2) ANGLE During playback of a disc, press ‘ANGLE’ to display the available angles for discs containing mul
ページ13に含まれる内容の要旨
Angle Screen Display 3) SUBTITLE During disc playback press ‘SUBTITLE’ to select the subtitle lan- guage you desire*, with the current Subtitle Language Number (1) and the total Number of Subtitle Languages (2) displayed. If there are multiple languages press ‘SUBTITLE’ again to select another subtitle language. To turn subtitles OFF, press the ‘SUB- TITLE’ button until ‘SUBTITLE OFF’ is displayed. The Subtitle display will disappear automatically if the ‘SUBTITLE’ button is not pressed aga
ページ14に含まれる内容の要旨
4) AUDIO During playback press ‘AUDIO’ to select the audio language you desire*, with the current Audio Channel Number (1) and the total number of Audio Channels (2) displayed. Press AUDIO again to select another audio language. The audio display will disappear automatically if the ‘AUDIO’ button is not pressed again for 3 seconds. Audio Language Screen Display *Some DVDs only allow access to this function through the DVD menu. 5) ZOOM During playback press ‘ZOOM’ to enlarge the picture by 1.5
ページ15に含まれる内容の要旨
6) A-B REPEAT a. During playback press ‘A-B’ to set the Starting Point A. A-B Repeat Starting Point Screen Display b. Press ‘A-B’ to set the Ending Point B and the player will re- peatedly play the part between Point A and Point B. A-B Repeat Ending Point Screen Display c. Press ‘A-B’ a 3rd time to Cancel A-B Repeat. Normal play back will resume from Point A. A-B Repeat Cancelled Screen Display 14
ページ16に含まれる内容の要旨
7) REPEAT a. During playback press ‘REPEAT’ once to repeatedly play the current chapter. Chapter Repeat ON Screen Display b. During playback press ' REPEAT' again to repeatedly play the current title. Title Repeat ON Screen Display c. During playback press 'REPEAT' a 3rd time to cancel the re- peat playback function and resume normal play back. The repeat display will disappear automatically if the ‘REPEAT’ button is not pressed again for 3 seconds. Repeat OFF Screen Display 15
ページ17に含まれる内容の要旨
4. PLAYING AUDIO CDS When playing an audio CD, the DISPLAY Banner appears automatically. It displays the current track and the amount of the time for that track playing, the total amount of time on the disc and the current time running on the disc. Press the DISPLAY button on the remote to display the DISPLAY Banner. The options below show you what happens when you press the DISPLAY button. a. During playback press ‘DISPLAY’ once and SINGLE ELAPSED will appear along with the current track pl
ページ18に含まれる内容の要旨
c. Press ‘DISPLAY’ three times and TOTAL ELAPSED appears along with the current track playing and the total time that the CD has been playing. TOTAL ELAPSED CDDA 01 00:00:00 TOTAL ELAPSED Screen Display d. Press ‘DISPLAY’ four times and TOTAL REMAIN appears along with the current track playing and the amount of time remaining on the CD. CDDA 01 TOTAL REMAIN 00:00:00 TOTAL REMAIN Screen Display e. Press ‘DISPLAY’ a fifth time and “OFF” will appear momentarily then disappear. The
ページ19に含まれる内容の要旨
5. PLAYING MP3 DISCS MP3 is a format for storing digital audio. An audio CD-quality song can be compressed into the MP3 format with very little loss of quality, while taking up much less space. CD-R discs that have been encoded in MP3 format can be played on your DVD player. SELECTING FOLDERS AND SONGS When an MP3 disc is inserted in the player, the SMART NAV screen will appear automatically. The SMART NAV screen is used to change folders and songs as well as display Disc TIME and TITLE Informa
ページ20に含まれる内容の要旨
3) USING THE REPEAT FEATURE The default mode for the Repeat feature is OFF. Pressing REPEAT consecutively changes the repeat options: REP-ONE- repeats the songs that is playing. FOLDER REP- repeats the folder that is playing. FOLDER- turns off repeat and returns to regular play mode. 4) SELECTING A PLAY MODE You can choose what order the songs will play on a disc temporarily. The FOLDER play mode is the default. To access the play mode options, press STOP if the disc is playing. Press the
