ページ1に含まれる内容の要旨
®
AVerMedia
AVerDiGi EB5416DVD Pro
User Manual
ページ2に含まれる内容の要旨
FCC NOTICE (Class A) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Federal Communications Commission Statement NOTE- This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
ページ3に含まれる内容の要旨
- WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION IF THERE IS ANY DAMAGE, SHORTAGE OR INAPPROPRIATE ITEM IN THE PACKAGE, PLEASE CONTACT WITH YOUR LOCAL DEALER. WARRANTY VOID FOR ANY UNAUTHORIZED PRODUCT MODIFICATION NOTICE - INFORMATION IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. - THE INFORMATION CONTAINED HEREIN IS TO BE CONSIDERED FOR REFERENCE ONLY.
ページ4に含まれる内容の要旨
Table of Contents Chapter 1 Introduction............................................................................... 1 1.1 Package Content .................................................................................................. 1 1.2 Features and Specifications.................................................................................. 1 1.3 Front Panel ........................................................................................................... 2 1.4 Back
ページ5に含まれる内容の要旨
5.2 Familiarizing with HDD Backup Application ........................................................ 48 5.3 To Backup Recorded Video File.......................................................................... 49 Chapter 6 ImageVerification.................................................................... 51 6.1 To Run the ImageVerification.............................................................................. 51 Chapter 7 iEnhance................................................
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
▲ ▲ ▲ ▲ ▲ RECORD BACK UP ST OP PAUSE A-B A-B REW PLAY FF ZOOM+ FOCUS+ SPEED+ ZOOM_ FOCUS_ SPEED_ PTZ PRESET ME NU AUTOSCAN ENTER FN ID ˙ ˙ ˙ 1 2 3 4 5 6 7 8 9 10 11 12 3 1 6 1 4 15 1 RM-AJ2 ® AVerMedia AVerDiGi EB5416DVD Pro Quick Installation Guide Chapter 1 Introduction 1.1 Package Content (1) (2) (3) (4) (6) (5) (7) (9) (8) (1) EB5416DVD Pro unit (2) Remote Control (batteries included) (3) Quick Installation Guide (4) Power Cord * The power cord varies de
ページ8に含まれる内容の要旨
3 level password authentication mechanism DVD backup (up to 4.2GB) Support 2 HDD backup (up to 1.5TB) JavaViewer on mobile phone and PDAViewer supported Built-in player to playback video without installing CD on PC Remote playback and backup Jog/Shuttle for playback On Screen Display(OSD) control menu Support network time synchronize function (Auto correction time delay & Day light saving) Support WebViewer on Internet Explorer Support Central Management Syst
ページ9に含まれる内容の要旨
Name Function 2 x USB 2.0 ports for connecting any USB devices, ex: USB pen drive, external (3) USB 2.0 port hard disk, keyboard, mouse…and so on. Do Not plug in two USB storage devices at the same time. i (4) Removable Hard To install hard disk for storage recorded video file Disk Draw For hard disk spec, please referring to http://www.avermedia.com/nvd/hardware-recom_eb_c.asp i (5) Removable Hard Removable hard disk power switch Disk Power To zoom in view of PTZ camera l
ページ10に含まれる内容の要旨
Name Function - As a number key for entering password in playback and preview mode - Channel camera selection number in playback and preview mode (12) Number button - As a preset position with in PTZ control ~ mode - With button can switch to different screen display modes (13) LCD Display Display DVR system status such as temperature and operate status A functional key for multiple system control - Press to enable multiple function modes and the button will light up b
ページ11に含まれる内容の要旨
1.4 Back Panel Name Function (1) Video Loop Out Output the video signal to a CCTV monitor. Only output one channel signal at a time. (2) CH1~ 16 Input the video camera signal and display it on channel 1~ 16 (3) Spot Monitor Output a video signal to a Spot Monitor when an alarm event is coming (4) LAN Port For Ethernet connection (5) TV Out Output the video signal to a TV (6) VGA Out Output the video signal to a CRT or LCD monitor (7) Audio I/O Support 16 channels audio input (ex.
ページ12に含まれる内容の要旨
1.5 Setting Up the DVR Unit 1.5.1 Installing the Removable Hard Disk The DVR unit allows user to install one hard disk. Before installing the hard disk, make sure to set the hard disk master jumper setting. Adjust the jumper setting according to the instructions on the hard disk label. For hard disk spec, please referring to http://www.avermedia.com/nvd/hardware-recom_eb.asp i The “compatible hard disks” indicated in the above recommendation list only means that these ® commercia
ページ13に含まれる内容の要旨
5. Carefully insert the hard disk in the removable 6. Turn the removable hard disk drawer over and rack screw hard disk with screws 7. And then, close the removable hard disk drawer 8. Slide the drawer back cover 9. Lock the removable hard disk drawer keylock 10. Power on the removable hard disk drawer 11. You may now connect all the cables. When the power is connected, the Power LED light turns on 7
ページ14に含まれる内容の要旨
1.5.2 Install Internal SATA Hard Disk User can install one SATA hard disk inside the DVR unit if it is necessary. Please follow the below steps to install the hard disk. 1. Loosen all screws 2. Push the cover backward and lift 3. Loosen the screws of holder that will make 4. Secure the brackets on the hard disk both side installation more convenient 5. Plug the SATA cable into hard disk 6. Plug the power cable into hard disk 8
ページ15に含まれる内容の要旨
7. Secure the hard disk inside the unit 8. Screw tight the holder 9. Push the cover forward 10. Secure the cover 9
ページ16に含まれる内容の要旨
1.5.3 Connecting Devices The back panel of the DVR unit, user can connect up to 16 video cameras, 16 sensor devices, 4 alarm devices, PTZ camera and output video to a TV or CRT/LCD monitor. Connecting the unit to a pen drive or external hard disk through USB connection for backup, then use the bundled software enables user to transfer, playback and segment the video. Follow the illustration below to make the connection: Each time you change the video display output, the power must be
ページ17に含まれる内容の要旨
1.5.4 Sensor, Relay and RS485 pinhole allocation The Sensor, Alarm, and PTZ camera ports enable you to connect 16 sensor inputs, 4 relay outputs, and 1 PTZ camera. Just connect the external sensor, relay, and PTZ camera pin directly to the pinhole. Check the table below and locate which pinhole is assigned to sensor input and relay output. 1.5.4.1 Sensor Pin Definition Sensor Pin # Definition Sensor Pin # Definition 1 Sensor 1 signal 9 Sensor 9 signal G Sensor 1 ground G Sensor
ページ18に含まれる内容の要旨
1.5.4.3 RS485 Pin Definition When connect PTZ camera through RS485 interface, please refer to the following pin definition to connect the DVD and PTZ. Pin # DVR PTZ TX+ RS485 TX+ signal RS485 RX+ signal TX- RS485 TX- signal RS485 RX- signal RX+ RS485 RX+ signal RS485 TX+ signal RX- RS485 RX- signal RS485 TX- signal 12
ページ19に含まれる内容の要旨
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ Chapter 2 Operating the EB5416DVD Pro 2.1 Familiarizing the Remote Control Buttons Use the Remote control to operate the OSD menu on surveillance screen. (4) RECORD BACK UP (2) (1) STOP PAUSE A-B (3) A-B (5) (7) REW PLAY FF (6) (8) ZOOM+ FOCUS+ SPEED+ (9) _ _ _ (10) ZOOM FOCUS SPEED (11) PTZ PRESET (12) (13) MENU AUTOSCAN (14) (15) (17) ENTER (16) (18) FN ID (19) ˙ ˙ ˙ 1 2 3 4 5 6 7 8 (20) 9 10 11 12 13 14 15 16 RM-AJ2 Name Function (1) To start recording video (2)
ページ20に含まれる内容の要旨
Name Function To save the preset position of PTZ camera. Adjust the PTZ camera lens to (13) the position that user wants, and then press + number button ( ~ ) to save the preset position. (see also Chapter 2.1.3.2) When the PTZ camera in PTZ mode, press preset position number button to move the PTZ camera to preset position. To enter the OSD Main menu / Exit from the main menu or sub-menu (14) display (15) To enable the auto scan function (16) Confirm or make a selection To
