ページ1に含まれる内容の要旨
Users Manual
DVD-V5600
DVD-V6600
PAL
Eng Magyar Czech Slovak
www.samsung.com
ページ2に含まれる内容の要旨
Safety Instructions The following illustrations represent precautions. The lightning bolt is a warning sign alerting you to dangerous voltage inside the product. DO NOT OPEN THE DVD-VCR. Refer to service personnel. DO NOT expose the DVD-VCR to DO NOT expose the DVD-VCR to DO NOT expose the DVD-VCR extreme temperature conditions direct sunlight. to any liquids. (below 5°C and above 40°C) or to extreme humidity conditions (less than 10% and more than 75%). DO NOT place any objects on the
ページ3に含まれる内容の要旨
Disc Type and Characteristics This DVD-VCR is capable of playing the following types of discs with the corresponding logos : Disc Types (Logos) Recording Types Disc Size Max. Playing Time Characteristics DVD contains excellent sound and Single-sided 240 min. DVD video due to Dolby Digital and 12 Cm Audio Double-sided 480 min. MPEG-2 system. + Various screen and audio functions Video Single-sided 80 min. 8 Cm can be easily selected through the Double-sided 160 min. on-scree
ページ4に含まれる内容の要旨
Recording a Programme Immediately . . . . . . . . . . . . . . . . .24 Contents Recording a Programme with Automatic Stop . . . . . . . . . .24 Recording from Another VCR or Camcorder . . . . . . . . . . . . . .25 Using the Assemble Edit Function . . . . . . . . . . . . . . . . . . .25 Getting Started Getting Started Using the Timer Programming Feature . . . . . . . . . . . . . . . .26 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Checking a Preset Recording
ページ5に含まれる内容の要旨
Overviews Front View of the DVD-VCR (DVD-V5600) 12 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Front View of the DVD-VCR (DVD-V6600) 12 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 1. DVD DECK. 12. EZ VIEW BUTTON. 2. OPEN/CLOSE BUTTON. 13. RECORD BUTTON. 3. VIDEO CAS
ページ6に含まれる内容の要旨
Rear View of the DVD-VCR (DVD-V5600/DVD-V6600) 1 2 3 4 5 6 7 8 9 10 1. AUDIO L, R OUT JACKS. 6. OUT TO TV CONNECTOR. 2. AERIAL IN CONNECTOR. 7. AV1 (EURO AV) IN/OUT SCART. 3. AV2 (DEC./EXT.) IN/OUT SCART (EURO-21) JACK. (EURO-21) JACK. 8. DIGITAL AUDIO OUT JACKS (COAXIAL). 4. AUDIO L, R OUT JACKS (DVD only). 9. COMPONENT VIDEO OUT JACKS. 5. VIDEO OUT JACK. 10. S-VIDEO OUT JACK. Display Indicators 1 2 3 4 5
ページ7に含まれる内容の要旨
Accessories Tour of the Remote Control Make sure that the following basic accessories are supplied with your DVD-VCR. 16 17 1 18 2 Owners Batteries for RF-Cable 19 Instructions remote controls 3 20 21 4 Audio & Video Remote Control Cable 5 22 6 23 7 Inserting Batteries in the Remote 8 24 Control You must insert or replace the batteries in the 9 25 remote control when you: Purchase the DVD-VCR Find that the remote control is no longer 26 10 working correctly 1 To release the battery compartm
ページ8に含まれる内容の要旨
1. DVD,VCR 23. PLAY/PAUSE ( ) Used to operate DVD, VCR. Used to play or pause during playback. 2. STANDBY/ON 24. SEARCH ( / ) Used to turn the power on or off. Used to search forward or backward through a disc. 3. Number buttons 25. PROG 4. TIMER Used to select a TV programme. Used to activate the timer recording of a programme. 26. RETURN Used to return to a previous menu. 5. REC ( ● ) Used to make a recording on cassette. 27. ZOOM Used to enlarges picture . 6. SKIP ( / ) Use t
ページ9に含まれる内容の要旨
Connecting DVD-VCR to the TV Connections Connections using the SCART Cable You can connect your DVD-VCR to the televi- Connecting DVD-VCR to the TV sion using the SCART cable if the appropriate using the RF Cable input is available on the television. You thus: Obtain better quality sound and pictures. To receive television programmes a signal must Simplify the setting up procedure of your be received from one of the following sources: DVD-VCR. An outdoor aerial. An indoor aerial. Note
ページ10に含まれる内容の要旨
Connecting DVD-VCR to a Satellite Connecting DVD-VCR to the TV Receiver or Other Equipment using the Audio/Video Cable You can connect your DVD-VCR to a Satellite You can connect your DVD-VCR to the televi- receiver or other DVD-VCR using the SCART sion using the audio/video cable if the appropri- cable if the appropriate outputs are available on ate input is available on the television. the equipment chosen. The following illustra- tions give a few examples of the connection 1 Connect one end o
ページ11に含まれる内容の要旨
Connecting DVD-VCR to the TV Connecting DVD-VCR to the TV using the S-Video Cable (DVD only) using the Component Video Cable (DVD only) You will enjoy high quality images. S-Video seperates the picture element into black and Your TV must support progressive scan input to white(Y) and colour(C) signals to present clearer allow you to watch component video output. images than regular video input mode. You will enjoy high quality accurate colour repro- duction images. Component video seperates the
ページ12に含まれる内容の要旨
AV Receiver Connections Progressive Scan (DVD only) To take full advantage of the movie theater If the TV connected supports Progressive Scan, experience that DVD offers, you may want to press the P.SCAN button on the front panel in connect your DVD-VCR to a complete Surround stop mode. Sound system, including an A/V Receiver and six Surround Sound speakers. If your A/V The message Press OK to confirm receiver is equipped with a Dolby Digital Progressive scan mode. Otherwise press Decoder, y
ページ13に含まれる内容の要旨
Connecting an Audio/Video Input Plug & Auto Setup Cable Your DVD-VCR will automatically set itself up when it is plugged into the mains for the first You can connect other audio/video equipment to time. TV stations will be stored in memory. The your DVD-VCR using audio/video cables if the process takes a few minutes. Your DVD-VCR appropriate outputs are available on the equip- will then be ready for use. ment chosen. Examples : 1 Connect the RF Cable as indicated on page You wish to copy a vid
ページ14に含まれる内容の要旨
5 Start the auto scanning. The number of stations automatically stored by the DVD-VCR depends on the number of stations that it has found. Auto Setup Please Wait 10% "" 6 Check the Date and Time. Clock Set SETUP Time Date Year DVD 12 : 00 01 / JAN / 2006 SUN VCR PROG FUNC Refer to Setting the Date and Time to change the date and time. (See page 18). Note Now, you only have to switch the DVD-VCR on and it is ready for use. Function for Plug & Auto Set Up is fixed already. So if you want
ページ15に含まれる内容の要旨
Setting the Date and Time Settings Settings Your DVD-VCR contains a 24-hour clock and calendar used to: Tuning Your Television for the DVD- Automatically stop programme recording. Preset your DVD-VCR to record a programme VCR automatically. You must tune your television for the DVD-VCR You must set the date and time when: only if you are using the RF cable. You purchase the DVD-VCR. To view pictures from your DVD-VCR when a Do not forget to reset the time when you Scart cable is used, th
ページ16に含まれる内容の要旨
Presetting the Stations Setting the Menu Language Automatically 1 Press the MENU button, then press the OK or You do not need to preset the stations if you " button. have already set them automatically (refer to Plug & Auto Set Up on page 13). Setup Your DVD-VCR contains a built-in tuner used to SETUP Language : English " receive television broadcasts. Clock " DVD Install " You must preset the stations received through VCR User Set " the tuner. This can be done: Auto Power Off : Off " PROG P
ページ17に含まれる内容の要旨
Presetting the Stations Manually 4 Press the OK button to start the auto scan- ning. The message Please Wait is displayed. You do not need to preset the stations manually if you have already set them automatically. Auto Setup 1 Press the MENU button, then press the OK or " button. Please Wait 10% Setup "" SETUP Language : English " Clock " DVD Install " VCR User Set " Auto Power Off : Off " The first frequency band is scanned and PROG Screen Messages : On " stored, then the DVD-VCR searches f
ページ18に含まれる内容の要旨
10 Repeat this procedure from step 4 onwards, ❉ ❉ MANUAL TUNING. ❉ ❉ until all the required stations have been PR : 1 stored. CH : 021 MFT : - DECODER : OFF 11 Press the MENU button to exit the menu. NAME : - - - - # #$ $!!!% %!" " MEMORY : OK RETURN Clearing a Preset Station If you have stored a TV station: 6 If necessary, press the # or$ button to That you do not require select MFT, then press the % or" button to At the wrong programme position, you can adjust the pictu
ページ19に含まれる内容の要旨
Changing the Preset Station Table 6 Press the # or $ button to select required position, then press the OK button to swap You can rearrange the station table and give the position. different programme numbers to the stations For example to move a TV station in listed according to your own preferences. programme 1 to programme 3. 1 Press the MENU button, then press the OK or ❉ ❉ TV STATION TABLE ❉ ❉ " button. PR CH NAME DEC 1 Setup 2 SETUP Language : English " 3 021 -
ページ20に含まれる内容の要旨
Setting the VCR Output Channel VCR Functions VCR Functions Your DVD-VCR output channel may need to be changed if the pictures suffer from interference Selecting the Colour Mode or if your TV cannot find the pictures. Before recording or playing back a cassette, 1 Press the MENU button, then press the OK you can select the required system standard. or " button. Otherwise, the system automatically selects the reception standard when you select AUTO. Setup When playing back a cassette, the standa
