ページ1に含まれる内容の要旨
DVD Player
DVD-P360K
DVD-P365K
www.samsung.com/mea
AK68-00918X
ページ2に含まれる内容の要旨
PRECAUTIONS PRECAUTIONS 1. Setting up 4. Disc - Refer to the identification label located on - Do not clean the disc using record-cleaning the rear of your player for its proper operat- sprays, benzene, thinner, or other volatile ing voltage. solvents that may cause damage to the disc surface. - Install your player in a cabinet with ade- quate ventilation holes. (7~10cm) Do not - Do not touch the disc’s signal surface. Hold block ventilation holes on any of the compo- by the edges or by one edge
ページ3に含まれる内容の要旨
BEFORE BEFORE YOU YOU T TABLE OF ABLE OF START CONTENTS START CONTENTS Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Accessories Before you start . . . . . . . . . . . . . . . . . . . . . . . . . 3 Setup General Features . . . . . . . . . . . . . . . . . . . . . . . . 4 Disc Type and Characteristics . . . . . . . . . . . . . . . 5 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Tour of the Remote Control . . . . . . . . . . . . . . . . . 8 Connec
ページ4に含まれる内容の要旨
SETUP SETUP General Features Note - Discs which cannot be played with this Excellent Sound player. Dolby Digital, a technology developed by Dolby • DVD-ROM • DVD-RAM Laboratories, provides crystal clear sound reproduc- • CD-ROM • CDV tion. •CDI • CVD Screen • CDGs play audio only, not graphics. Both regular and widescreen(16:9) pictures can be - Ability to play back may depend on recording viewed. conditions. Slow Motion • DVD-R, +R An important scene can be viewed in slow motion. • CD-RW Par
ページ5に含まれる内容の要旨
Disc Type and Characteristics This DVD player is capable of playing the following types of discs with the corresponding logos: Disc Types (Logos) Recording Types Disc Size Max. Playing Time Characteristics - DVD contains excellent sound and Single-sided 240 min. DVD 12 Cm video due to Dolby Digital and MPEG- Double-sided 480 min. Audio 2 system. + -Various screen and audio functions Video Single-sided 80 min. 8 Cm can be easily selected through the on- Double-sided 160 min. screen menu. VIDEO-CD
ページ6に含まれる内容の要旨
Description Front Panel Controls DVD-P360K 8 6 8 9 10 1 2 34 5 7 DVD-P365K 6 1 2 8 9 10 8 4 5 3 7 1. STANDBY/ON ( ) 6. OPEN/CLOSE ( ) When STANDBY/ON is pressed on, the indicator goes Press to open and close the disc tray. out and the player is turned on. 7. DISPLAY 2. STANDBY indicator Operation indicators are displayed here. When the unit is first plugged in, this indicator lights. 8 SKIP ( / ) SEARCH 3. MIC 1/2 Allow you to search forward/backward through Connect Microphone for karaoke funct
ページ7に含まれる内容の要旨
Rear Panel 1 2 5 13 4 1.DIGITAL AUDIO OUT JACKS 3. AUDIO OUT JACKS - Use either an optical or coaxial digital cable to connect to - Connect to the Audio input jacks of your television or a compatible Dolby Digital receiver. audio/video receiver. - Use to connect to an A/V Amplifier that contains a Dolby Digital, MPEG2 or DTS decoder. 4. VIDEO OUT JACK - Use a video cable to connect to the Video input jack on 2. COMPONENT VIDEO OUT JACKS your television. - Use these jacks if you have a TV with
ページ8に含まれる内容の要旨
Tour of the Remote Control 5. INSTANT REPLAY Button This function is used to replay the previous 10 seconds of a movie from the current position. 14 1 6. SKIP Buttons ( ) / 15 Use to skip the title, chapter or track 7. STOP Button ( ) 2 8. MENU Button Brings up the DVD player’s menu. 9. ENTER/ Buttons / , / This button functions as a toggle switch. 3 16 10. EZ VIEW Button 4 The aspect ratio of a picture can easily be adjusted according to the screen size of your TV (16:9 or 4:3). 5 17 6 11.
ページ9に含まれる内容の要旨
CONNECTIONS CONNECTIONS Choosing a Connection The following shows examples of connections commonly used to connect the DVD player with a TV and other components. Before Connecting the DVD Player - Always turn off the DVD player, TV, and other components before you connect or disconnect any cables. - Refer to the user’s manual of the additional components you are connecting for more information on those particular components. Connection to a TV (For Video) 1 Using video/audio cables, connect the
ページ10に含まれる内容の要旨
Connection to a TV (S-Video) - Connecting to your TV using an S-Video cable. -You will enjoy high quality images. S-Video separates the picture element into black and white(Y) and color(C) signals to present clearer images than regular video input mode. (Audio signals are delivered through the audio output.) 1 Using an S-Video cable (not included), connect the S- VIDEO OUT terminal on the rear of the DVD player to the S-VIDEO IN terminal of TV. 2 Using the audio cables, connect the AUDIO (red an
ページ11に含まれる内容の要旨
Connection to a TV (Interlace) - Connecting to your TV using Component video cables. -You will enjoy high quality and accurate color reproduction images. Component video separates the pic- ture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean images. (Audio signals are delivered through the audio output.) 1 Using component video cables (not included), connect the COMPONENT VIDEO OUT terminal on the rear of the DVD player to the COMPONENT IN terminal of TV. 2
ページ12に含まれる内容の要旨
Connection to a TV (Progressive) 1 Using component video cables (not included), connect the COMPONENT VIDEO OUT terminal on the rear of the DVD player to the COMPONENT IN terminal of TV. 2 Using the audio cables, connect the AUDIO (red and RED BLUE GREEN white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of TV. Turn on the DVD player and TV. 3 RED WHITE Press the input selector on your TV remote control until the S-Video signal from the DVD player appea
ページ13に含まれる内容の要旨
Connection to an Audio System (2 Channel Amplifier) 1 Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of the Amplifier. 2 Using the video signal cable(s), connect the VIDEO, S- VIDEO or COMPONENT OUT terminals on the rear of the DVD player to the VIDEO, S-VIDEO or COMPONENT IN terminal of your TV as described on pages 9 to 12. RED WHITE 3 Audio Cable Turn on the DVD player, TV, and Amplifier. RED WHIT
ページ14に含まれる内容の要旨
Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier) 1 If using an optical cable (not included), connect the DIGI- TAL AUDIO OUT (OPTICAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (OPTICAL) terminal of the Amplifier. If using a coaxial cable (not included), connect the DIGI- TAL AUDIO OUT (COAXIAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier. 2 Using the video signal cable(s), connect the VIDEO, S- VIDE
ページ15に含まれる内容の要旨
BASIC BASIC FUNCTIONS FUNCTIONS 4. Stopping Play Playing a Disc Press the STOP ( ) button during play. Before Play 5. Removing Disc -Turn on your TV and set it to the correct Video Press the OPEN/CLOSE ( ) button. Input by pressing TV/VIDEO button on the TV 6. Pausing Play remote control. Press the PLAY/PAUSE ( ) or STEP button on the remote control during play. - If you connected an external Audio System, turn - Screen stops, no sound. on your Audio System and set it to the correct To resume, p
ページ16に含まれる内容の要旨
Using the Search and Skip Using the Display Function Functions When Playing a DVD/VCD/MPEG4 During play, you can search quickly through a chapter or 1. During play, press the INFO button on the remote control. track, and use the skip function to jump to the next selection. - You can select Info in the function menu by pressing the MENU button. Searching through a Chapter or 2. Press the / buttons to select the desired item. Track - When playing VCD2.0, this function works only when During play
ページ17に含まれる内容の要旨
Using the Disc and Title Using the Function Menu Menu Using the Function Menu Using the Disc Menu 1. Press the MENU button during playback. 1. During the playback of a DVD disc, press the MENU button 2. Press the / buttons to select Function, then press the on the remote control. or ENTER button. 2. Press the / buttons to select Disc Menu, then press the - Info (See page 16) or ENTER button. - Zoom (See page 21) - Bookmark (See pages 20 to 21) - Repeat (See pages 17 to 18) Press ENTER k
ページ18に含まれる内容の要旨
Using the A-B Repeat function 1. Press the REPEAT button on the remote control. 2. Press the / buttons to Select A-B button. ADV ADVANCED ANCED 3. Press the ENTER button at the point where you want repeat play to start (A). B is automatically highlighted. FUNCTIONS FUNCTIONS 4. Press the ENTER button at the point where you want the repeat play to stop (B). Adjusting the Aspect Ratio - To return to normal play, press the CANCEL button. (EZ View) 5. To return to normal play, press REPEAT butt
ページ19に含まれる内容の要旨
If you are using a 4:3 TV 2. To remove the AUDIO icon, press the CANCEL or RETURN button. For 16:9 aspect ratio discs - 4:3 Letter Box Note Displays the content of the DVD title in 16:9 aspect ratio. The - This function depends on audio languages are black bars will appear at the top and bottom of the screen. encoded on the disc and may not work. - 4:3 Pan&Scan -A DVD disc can contain up to 8 audio languages. The left and right portions of the screen are cut off and the central portion of the 16
ページ20に含まれる内容の要旨
Changing the Camera Using the Bookmark Angle Function When a DVD contains multiple angles of a particular This feature lets you bookmark sections of a DVD or scene, you can use the ANGLE function. VCD (Menu Off mode) so you can quickly find them Using the ANGLE Function (DVD) at a later time. If the disc contains multiple angles, the ANGLE Using the Bookmark Function appears on the screen. (DVD/VCD) 1. During play or pause mode, press the MENU button on the remote control. 1. During play, press
