ページ1に含まれる内容の要旨
DVD-1080P9
DVD-1080PR
DVD Player
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/global/register
AK68-01750B(01)
ページ2に含まれる内容の要旨
getting started Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with a dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers,stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safet
ページ3に含まれる内容の要旨
● GETTING STARTED Precautions This symbol indicates that This symbol indicates that there are dangerous voltage consisting a risk important operating and maintenance of electric shock is present within instructions in the literature this unit. accompanying this unit. Do not install this equipment in a confined space such as a bookcase or similar unit. WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. Note to CATV system installer :
ページ4に含まれる内容の要旨
getting started CAUTION THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. Note: • This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere. • This DVD player is designed and manufactured to respond to the Region Management Information. If the Regio
ページ5に含まれる内容の要旨
● GETTING STARTED Before you start Accessories Remote Control Batteries for User’s Manual Video/Audio Remote Control Cable (AAA Size) Install Batteries in the Remote control 1 Open the battery cover on the back of the remote control. 2 Insert two AAA batteries. Make sure that the polarities (+ and -) are aligned correctly. 3 Replace the battery cover. If the remote control doesn’t operate properly: - Check the polarity + - of the batteries. - Check if the batteries are drained. - Che
ページ6に含まれる内容の要旨
getting started 3 Precautions GETTING STARTED 5 Before you Start 7 General features 8 Disc Type and Characteristics 3 9 Description 11 Tour of the Remote Control 12 Choosing a Connection CONNECTIONS 12 Connecting to a TV with HDMI Jack 12 Connecting to a TV with DVI Jack 14 Connecting to a TV (Progressive) 12 15 Connecting to a TV (Interlace) 16 Connecting to a TV (Video) 17 Connecting to an Audio System (2 Channel Amplifi er) 18 Connecting to an Audio System (Dolby digital, MPEG2 or DTS Amplifi
ページ7に含まれる内容の要旨
● GETTING STARTED General Features Excellent Sound Note Dolby Digital, a technology developed by Dolby - Discs which cannot be played with this Laboratories, provides crystal clear sound player. reproduction. • DVD-ROM • DVD-RAM • CD-ROM • CDV Screen • CDI • CVD Both regular and widescreen(16:9) pictures can be viewed. • CDGs play audio only, not graphics. - Ability to play back may depend on Slow Motion recording conditions. An important scene can be viewed in slow motion. • DVD
ページ8に含まれる内容の要旨
getting started Disc Type and Characteristics This DVD player is capable of playing the following types of discs with the corresponding logos: Characteristics Disc Types (Logos) Recording Types Disc Size Max. Playing Time - DVD contains excellent sound and Single-sided 240 min. DVD 5” video due to Dolby Digital and Double-sided 480 min. Audio MPEG-2 system. + - Various screen and audio functions Video Single-sided 80 min. 3 1/2” can be easily selected through the Double-sided 160 min. on-
ページ9に含まれる内容の要旨
● GETTING STARTED Description Front Panel Controls 1 2 3 4 9 8 7 6 5 1. DISC TRAY 6. STOP ( ) Place the disc here. Stops disc play. 2. OPEN/CLOSE ( ) 7. SKIP ( ) / SEARCH Press to open and close the disc tray. Use to reverse skip a scene or music. 3. DISPLAY 8. USB HOST Operation indicators are displayed here. Connect a digital still camera, MP3 player, memory stick, 4. PLAY/PAUSE ( ) Card reader and other removable storage devices. Begin or pause disc play. 9. STANDBY/ON ( ) 5. SKIP (
ページ10に含まれる内容の要旨
getting started Rear Panel 1 2 4 5 3 1. AUDIO OUT JACKS 4. COMPONENT VIDEO OUT JACKS - Use audio cables to connect to the Audio input jacks - Use these jacks if you have a TV with Component of your television or audio/video receiver Video in jacks. These jacks provide P , P and Y R B video. 2. DIGITAL AUDIO JACKS - If P-SCAN is set to “ON” in Video Output of the - Use either an coaxial digital cable to connect to a Setup Menu, progressive scan mode will work. compatible Dolby Digit
ページ11に含まれる内容の要旨
● GETTING STARTED Tour of the Remote Control 9. SKIP Buttons ( ) / Use to skip the title, chapter or track. 10. STOP Button ( ) 1 17 11. MENU Button 18 Brings up the DVD player’s menu. 2 12. ENTER/ π † √ ® Buttons / , / 19 3 This button functions as a toggle switch. 20 13. INFO Button 4 21 Displays the current disc mode. 22 5 23 14. DISC MENU Button 24 Brings up the Disc menu. 6 7 15. OPEN/CLOSE ( ) Button 25 8 To open and close the disc tray. 9 16. HDMI SEL. Button 10 26 HDMI Outpu
ページ12に含まれる内容の要旨
connections Choosing a Connection The following shows examples of connections commonly used to connect the DVD player with a TV and other components. Before Connecting the DVD Player - Always turn off the DVD player, TV, and other components before you connect or disconnect any cables. - Refer to the user’s manual of the additional components (such as a TV) you are connecting for more information on those particular components. Connecting to a TV with HDMI Jack 1 Using an HDMI-HDMI cable (not
ページ13に含まれる内容の要旨
● CONNECTIONS HDMI VIDEO Specifications When you press the HDMI SEL. button, the 480p, 720p, 1080i and 1080p resolutions are selected in order. The first press of the HDMI SEL. button, brings up the current resolution. The second press allows you to change the HDMI output resolution. - Depending on your TV, certain HDMI output resolutions may not work. - Please refer to the user's manual of your TV. - If an HDMI or HDMI-DVI cable is plugged into TV, the DVD player’s output is set to HDMI automa
ページ14に含まれる内容の要旨
connections Connecting to a TV (Progressive) 1 Using Component video cables (not included), connect the COMPONENT VIDEO OUT jacks on the rear of the DVD player to the COMPONENT IN jacks of your TV. 2 WHITE Using the audio cables, connect the AUDIO (red and white) OUT jacks on the rear of the DVD player to the AUDIO (red and white) IN jacks of your TV. GREEN BLUE Turn on the DVD player and TV. RED RED 3 Component cable (not included) Audio Cable Set the Video Output to P-SCAN in the Display
ページ15に含まれる内容の要旨
● CONNECTIONS Connecting to a TV (Interlace) - Connecting to your TV using Component video cables. The 480i resolution is possible with this connection. - You will enjoy excellent quality and accurate color reproduction images. Component video separates the picture element into black and white(Y), blue(P ), red(P ) signals to present clear B R and clean images. (Audio signals are delivered through the audio output.) 1 Using Component video cables (not included), connect the COMPONENT VIDEO
ページ16に含まれる内容の要旨
connections Connecting to a TV (Video) 1 Using Video/Audio cables, connect the VIDEO (yellow)/AUDIO (red and white) OUT jacks on the rear of the DVD player to the VIDEO (yellow)/AUDIO (red and white) IN jacks of your TV. WHITE 2 Turn on your DVD player and TV. RED YELLOW Video Cable (Included) 3 Audio Cable RED WHITE YELLOW (Included) Set the Video Output to I-SCAN in the Display Setup menu. (See pages 51 to 52). You can also use the VIDEO SEL. button to change the Video Output mode. 4 Press
ページ17に含まれる内容の要旨
● CONNECTIONS Connecting to an Audio System (2 Channel Amplifier) 1 Using the audio cables, connect the AUDIO (red and white) OUT jacks on the rear of the DVD player to the AUDIO (red and white) IN jacks of the Amplifier. 2 WHITE Using the video signal cable(s), connect the HDMI, COMPONENT or VIDEO OUT jacks on the rear of the DVD player to the HDMI/DVI, COMPONENT or VIDEO IN jack of RED your TV as described on pages 12 to 16. 3 Audio Cable Turn on your DVD player, TV, and Amplifier. (Incl
ページ18に含まれる内容の要旨
connections Connecting to an Audio System (Dolby Digital, MPEG2 or DTS Amplifier) 1 If using a Coaxial cable (not included), connect the DIGITAL AUDIO (COAXIAL) jack on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) jack of the Amplifier. 2 Using the video signal cable(s), connect the HDMI, COMPONENT or VIDEO OUT jacks on the rear of the DVD player to the HDMI/DVI, COMPONENT or VIDEO IN jack of your TV as described on pages 12 to 16. Coaxial Cable (not included) 3 Turn on you
ページ19に含まれる内容の要旨
● BASIC FUNCTIONS ▼ basic functions Playing a Disc Before Play - Turn on your TV and set it to the Video Input your DVD player is connected to with your TV’s remote control. - If you connected the DVD player to an external Audio System, turn on your Audio System and set it to the correct Audio Input. After plugging in the player, the first time you press the DVD POWER button, the screen Select Menu Language to the right appears: If you want to select a language, press a NUMBER button. Pres
ページ20に含まれる内容の要旨
▼ ▼ ▼ basic functions Note 4 - If the player is left in the stop mode for more Stopping Play than one minute without pressing any buttons, a Press the STOP ( ) button screen saver will be activated. Press the PLAY during play. ( ) button to resume normal play. - If the player is left in the stop mode for more than 30 minutes, the power will automatically turn off. 5 Removing the Disc Press the OPEN/CLOSE ( ) button. Screen stops, no sound. To resume, press the PLAY ( ) button once 6
