ページ1に含まれる内容の要旨
3-063-397-33(2)
SACD/DVD Player
SACD/DVD Player
Operating Instructions
DVP-S9000ES
© 2000 Sony Corporation
ページ2に含まれる内容の要旨
WARNING Welcome! Installing Thank you for purchasing this Sony To prevent fire or shock • Allow adequate air circulation to prevent SACD/DVD Player. Before operating this hazard, do not expose the internal heat buildup. unit, please read this manual thoroughly unit to rain or moisture. • Do not place the unit on surfaces (rugs, and retain it for future reference. To avoid electrical shock, blankets, etc.) or near materials (curtains, draperies) that may block the ventilation do not open the cabi
ページ3に含まれる内容の要旨
TABLE OF CONTENTS Features 4 About This Manual 5 Settings and Adjustments 50 This Player Can Play the Following Discs 5 Using the Setup Display 50 Precautions 8 Setup Display Item List 52 Notes About the Discs 8 Setting the Display Language or Sound Track (LANGUAGE SETUP) 53 Settings for the Display (SCREEN SETUP) 56 Getting Started 9 Custom Settings (CUSTOM SETUP) 57 Unpacking 9 Settings for the Sound (AUDIO SETUP) 62 TV Hookups 10 Adjusting the Progressive video signal Receiver (Amplifier) Hoo
ページ4に含まれる内容の要旨
Features Thank you for purchasing this Sony SACD/DVD player. Access control (Custom Parental Control) Here are some of the features you will enjoy. You can set a password that will control the access of a maximum of 300 discs. Compatible with progressive (525p) signal format TVs Adjustable display brightness and high visibility By connecting your TV to the COMPONENT VIDEO OUT remote buttons connectors on this player, you can choose between the You can adjust the brightness of the front panel dis
ページ5に含まれる内容の要旨
About This Manual Conventions Icon Meaning • Instructions in this manual describe the controls on the remote. You can also use the controls on the player if they have the Indicates tips and hints for making the task easier. same or similar names as those on the remote. z • Displays on the screen are slightly different depending on the player model. Illustrations of the on-screen display in this Indicates that the function is for DVD manual are for one of the player models. VIDEOs. • The icons on
ページ6に含まれる内容の要旨
This Player Can Play the Following Discs DVD Super Audio CD (SACD) A DVD disc contains both audio and visual data, and is An SACD disc can reproduce sounds that are extremely either 12 or 8 centimeters in diameter. A 12 centimeter disc faithful to the original sound by use of DSD (Direct can hold 7 times the amount of data contained in a CD- Stream Digital) technology. This technology utilizes a ROM, which translates to 4 consecutive hours of playing sampling frequency of 2.8224MHz, which is 64
ページ7に含まれる内容の要旨
Note on PBC (Playback Control) (VIDEO CDs) Audio CD This player conforms to Ver. 1.1 and Ver. 2.0 of VIDEO CD An audio CD contains audio data. The playing time is 74 standards. You can enjoy two kinds of playback according to the minutes for a standard 12 centimeter CD, and 20 minutes disc type. for an 8 centimeter CD single. Disc type You can Video CD VIDEO CDs Enjoy video playback (moving pictures) A video CD can contain both audio and visual data in a without PBC as well as music. disc that i
ページ8に含まれる内容の要旨
Precautions On safety • Caution – The use of optical instruments with this IMPORTANT NOTICE product will increase eye hazard. Caution: The enclosed DVD player is capable of • Should any solid object or liquid fall into the cabinet, holding a still video image or on-screen display unplug the player and have it checked by qualified image on your television screen indefinitely. If you personnel before operating it any further. leave the still video image or on-screen display image displayed on you
ページ9に含まれる内容の要旨
Getting Started Unpacking Getting Started Check that you have the following items: • Audio/video connecting cord (1) • S video cord (1) • Power cord (1) • Remote commander (remote) RMT-D122E/D122O (1) This section describes how to hook up • Size R6 (AA) batteries (2) the SACD/DVD player to a TV (with audio/video input jacks) and/or an Inserting batteries into the remote AV receiver (amplifier). You cannot connect this player to a TV which You can control the player using the supplied remote. In
ページ10に含まれる内容の要旨
Getting Started TV Hookups This connection is for listening to the sound through TV Required cords speakers (L: left, R: right). Refer to the instructions Audio/video connecting cord (supplied) (1) supplied with the component to be connected. Yellow Yellow White (L) White (L) Red (R) Red (R) S video cord (supplied) (1) When connecting the cords, be sure to match the color-coded cord to the appropriate jacks on the components: Yellow (video) to Yellow, Red (right) to Red and White (left) to Whit
ページ11に含まれる内容の要旨
Getting Started If you connect the player to a monitor or Setups for the player projector having component video input Some setup adjustments are necessary for the player connectors that conform to the output signals depending on the TV or other components to be from the COMPONENT VIDEO OUT (Y, PB/CB, connected. PR/CR) connectors on the player Use the setup display to change the various settings. Connect the component via the COMPONENT VIDEO For details on using the setup display, see page 50. O
ページ12に含まれる内容の要旨
Getting Started Receiver (Amplifier) Hookups This connection is for listening to the sound through Do not connect the mains lead to a switched mains such speakers connected to a receiver lacking a built-in DTS, as the mains on a receiver (amplifier). Doing so may cause Dolby* Digital or MPEG audio decoder. Refer as well to the Playback Memory, Disc Memo and menu settings to be the instructions supplied with the component to be cancelled when you turn off the receiver. connected. * Manufactured
ページ13に含まれる内容の要旨
Getting Started Required cords Setups for the player Audio connecting cord (not supplied) (1) Some setup adjustments are necessary for the player depending on the components to be connected. White (L) White (L) Use the setup display to change the various settings. Red (R) Red (R) For details on using the setup display, see page 50. S video cord (supplied) (1) • To listen to the sound through speakers connected to a receiver (amplifier) which has a digital connector and lacks a built-in DTS, Dolb
ページ14に含まれる内容の要旨
Getting Started 5.1 Channel Surround Hookups With DVDs which contain DTS, Dolby Digital or MPEG Setups for the player audio sound, you can enjoy the surround sound while Some setup adjustments are necessary for the player producing the effect of being in a movie theater or a depending on the components to be connected. concert hall using a digital component with a built-in Use the setup display to change the various settings. DTS, MPEG audio or Dolby Digital decoder (not For details on using the
ページ15に含まれる内容の要旨
Getting Started To S VIDEO TV input S VIDEO IN To S VIDEO OUT SACD/DVD player AUDIO OUT DIGITAL OUT PCM/DTS/MPEG/ RL DOLBY DIGITAL 2 OPTICAL COAXIAL 1 COMPONENT VIDEO OUT Y PB/CB PR/CR SCAN SELECT 2 2 SELECTABLE INTERLACE PROGRESSIVE 1 1 VIDEO S VIDEO OUT OUT To DIGITAL OUT To DIGITAL OUT (OPTICAL) (COAXIAL) Take off the cap. To an AC outlet To optical To coaxial digital digital input input DIGITAL TV/LD DVD VIDEO 2 VIDEO 1 MONITOR S-LINK AC OUTLET TV/LD IN CTRL A1 AC-3 RF 5.1 INPUT PRE OUT F
ページ16に含まれる内容の要旨
Getting Started Selecting the Language for the On-Screen Display You can select the language for the setup display, the 3 Select “LANGUAGE SETUP” using M/m, and then Control Menu display or the messages displayed on the press ENTER. screen. The default setting is “ENGLISH.” LANGUAGE SETUP OSD: ENGLISH DVD MENU: ENGLISH AUDIO: ORIGINAL SUBTITLE: AUDIO FOLLOW 1 2 3 4 5 6 7 8 9 - 0 ENTER To set, press , then . ENTER To quit, press . DISPLAY DISPLAY 4 Select “
ページ17に含まれる内容の要旨
Getting Started Operation Sound Effects (Sound Feedback) To return to the previous screen The player beeps when the following operations are Press O RETURN. performed. The default setting of the Sound Feedback function is set To quit while making a selection to off. Press DISPLAY. Operation Operation sound Note Power is turned on One beep The languages you can select are the ones displayed in step 4. For details, see page 53. Power is turned off Two beeps H is pressed One beep X is pressed Two b
ページ18に含まれる内容の要旨
Playing Discs Playing Discs Depending on the DVD or VIDEO CD, some This chapter describes how to play a operations may be different or restricted. Refer to the instructions supplied with your disc. DVD/SACD/CD/VIDEO CD. POWER Power indicator AH @/1 1 2 3 4 5 6 7 8 9 - 0 1 Turn on your TV. Turn on the TV and select the video input so that you can view the pictures from this player. When using a receiver (amplifier) Turn on the receiver (amplifier) and select the appropriate position so that
ページ19に含まれる内容の要旨
Playing Discs Notes on playing DTS sound tracks on a DVD After following Step 4 The signals of the DTS sound tracks are output from the xWhen playing a DVD DIGITAL OUT OPTICAL and COAXIAL connectors only. No A DVD menu or title menu may appear on the TV sound will be output from the AUDIO OUT connectors. screen (see page 24). • If the player is connected to an audio component lacking a xWhen playing a VIDEO CD built-in DTS decoder, do not set “DTS” in “DIGITAL OUT” to Depending on the VIDEO CD,
ページ20に含まれる内容の要旨
Playing Discs Playing Discs When playing SACDs Achieving high quality sound When you are playing an SACD, the SACD indicator on reproduction the player lights up. In order to select one of the layers on The following settings enable you to play audio CDs, 96 a hybrid SACD (page 6), stop the player and press the kHz DVDs, and SACDs at the highest possible sound SACD/CD button on the remote. The SACD indicator on quality. the player turns off when a CD layer is played. VIDEO OFF indicator SACD in
