ページ1に含まれる内容の要旨
2-661-557-11(1)
DVD Home Theatre
System
Operating Instructions
DAV-DZ210D
©2006 Sony Corporation
ページ2に含まれる内容の要旨
3 Installing WARNING Allow adequate air circulation to prevent internal heat buildup. To reduce the risk of fire or electric Do not place the unit on surfaces (rugs, blankets, etc.) shock, do not expose this apparatus to or near materials (curtains, draperies) that may block the ventilation slots. rain or moisture. Do not install the unit near heat sources such as radiators, or air ducts, or in a place subject to direct Do not install the appliance in a confined space, such sunlight
ページ3に含まれる内容の要旨
Table of Contents Welcome!................................................2 Playing in Random Order ..................... 36 About This Manual .................................5 (Shuffle Play) Overview of DAB ...................................5 Playing Repeatedly............................... 37 This System Can Play the Following (Repeat Play) Discs .................................................6 Using the DVD’s Menu........................ 38 Changing the Sound.............................
ページ4に含まれる内容の要旨
Advanced Settings and Adjustments Locking Discs .......................................58 (CUSTOM PARENTAL CONTROL, PARENTAL CONTROL) Getting Optimal Surround Sound for a Room ..............................................61 (SPEAKER FORMATION) Calibrating the Appropriate Settings Automatically .................................63 (AUTO CALIBRATION) Using the Setup Display........................65 Setting the Display or Sound Track Language ........................................67 [LANGU
ページ5に含まれる内容の要旨
About This Manual Overview of DAB DAB (Digital Audio Broadcasting) is a new The instructions in this manual describe the multimedia broadcasting system that replaces controls on the remote. You can also use the the current FM/AM broadcast to transmit audio controls on the system if they have the same or programs with a quality comparable to that of similar names as those on the remote. * CDs . The Control Menu items may be different Each DAB multiplex radio station converts dependi
ページ6に含まれる内容の要旨
DAB programs are broadcast in Band-III (174 to 240 MHz) and/or L-Band (1452 to 1491 MHz), with each This System Can Play the band divided into channels. Each of these channels has its own channel label. For details on the channel Following Discs labels and frequencies that this tuner supports, see the Frequency Table on page 79. This tuner supports Band-III only. Format of Disc logo discs This tuner does not support data services. This tuner supports reception in the United Kingdo
ページ7に含まれる内容の要旨
The system can play DVD-ROMs/DVD+RWs/ Music discs encoded with DVD-RWs/DVD+Rs/DVD-Rs recorded in the copyright protection following formats: technologies – MP3 audio tracks, JPEG image files of format This product is designed to play back discs that conforming to UDF (Universal Disc Format) conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed Example of discs that the by some record companies. Please be aware
ページ8に含まれる内容の要旨
indication may be given even though playing the DVD VIDEO is prohibited by area restrictions. Note on playback operations of DVDs and VIDEO CDs Some playback operations of DVDs and VIDEO CDs may be intentionally set by software producers. Since this system plays DVDs and VIDEO CDs according to the disc contents the software producers designed, some playback features may not be available. Also, refer to the instructions supplied with the DVDs or VIDEO CDs. Copyrights This product incorpo
ページ9に含まれる内容の要旨
Getting Started – BASIC – Getting Started – BASIC – See Unpacking in Specifications, page 78. Inserting batteries into the remote You can control the system using the supplied remote. Insert two R6 (size AA) batteries by matching the 3 and # ends on the batteries to the markings inside the compartment. When using the remote, point it at the remote sensor on the system. Note Do not leave the remote in an extremely hot or humid place. Do not use a new battery with an old one. Do not drop
ページ10に含まれる内容の要旨
Step 1: Connecting the System and TV This hookup is the basic connection of the system to the speakers and TV. For other TV connections, see page 21. For other component connection, see page 24. To accept progressive signals, see page 22. Refer to the connection diagram below, and read the additional information from 1 to 4 on the following pages. Front speaker (L) Front speaker (R) Center speaker AM loop antenna (aerial) DAB wire antenna (aerial) COMPONENT VIDEO OUT EURO AV SPEAKER YPB/CB PR
ページ11に含まれる内容の要旨
Getting Started – BASIC – 1 Connecting the Speakers Required cords The connector and color tube of the speaker cords are the same color as the label of the jacks to be connected. Color tube (+) (–) Note Do not catch the speaker cord insulation in the SPEAKER jack. To avoid short-circuiting the speakers Short-circuiting of the speakers may damage the system. To prevent this, be sure to follow these precautions when connecting the speakers. Make sure the bare wire of each speaker cord does not
ページ12に含まれる内容の要旨
AM Tip When you want to output the TV sound or stereo sound of a 2 channel source from the 6 speakers, select the “Dolby Pro Logic,” “Dolby Pro Logic II MOVIE,” or “Dolby Pro Logic II MUSIC” sound field (page 29). 3 Connecting the Antenna (Aerial) To connect the AM antenna (aerial) Plastic stand (supplied) Antenna (aerial) The shape and the length of the antenna (aerial) is designed to receive AM signals. Do not dismantle or roll up the antenna (aerial). 1 Remove only the loop part from the
ページ13に含まれる内容の要旨
Getting Started – BASIC – To connect the FM wire antenna (aerial) Connect the FM wire antenna (aerial) to the COAXIAL FM 75 Ω jack. FM wire antenna (aerial) FM wire antenna (aerial) (supplied) (supplied) or COAXIAL FM 75 Ω jack COAXIAL FM 75 Ω jack Note Be sure to fully extend the FM wire antenna (aerial). After connecting the FM wire antenna (aerial), keep it as horizontal as possible. Tip If you have poor FM reception, use a 75-ohm coaxial cable (not supplied) to connect the system to an
ページ14に含まれる内容の要旨
Connect a DAB external antenna (aerial) (not supplied) to the ANTENNA DAB 75 Ω jack on the rear of the unit. ANTENNA DAB 75 Ω jack 75-ohm coaxial cable with F male type connector (not supplied) To DAB external antenna (aerial) (not supplied) Tip To install the DAB external antenna (aerial) (not supplied), 75-ohm coaxial cable with F male type connector (not supplied) will be needed. 4 Connecting the AC power cord (mains lead) Before connecting the AC power cord (mains lead) of this system
ページ15に含まれる内容の要旨
Getting Started – BASIC – Tip Step 2: Positioning the When you change the positions of the speakers, it is recommended that you change the settings. For System details, see “Getting Optimal Surround Sound for a Room” (page 61) and “Calibrating the Appropriate Settings Automatically” (page 63). Positioning the speakers For the best possible surround sound, all the speakers other than the subwoofer should be the same distance from the listening position (A). However, this system allows yo
ページ16に含まれる内容の要旨
LANGUAGE SETUP Step 3: Performing the OSD: ENGLISH MENU: ENGLISH FRENCH Quick Setup AUDIO: SPANISH SUBTITLE: PORTUGUESE Follow the steps below to make the minimum number of basic adjustments for using the system. 5 Press X/x to select a language. "/1 The system displays the menu and subtitles in the selected language. 6 Press ENTER. The Setup Display for selecting the aspect ratio of the TV to be connected appears. SCREEN SETUP TV TYPE: 16:9 C/X/x/c SCREEN SAVER: 16:9 ENTER BACKGROUND: 4:3
ページ17に含まれる内容の要旨
Getting Started – BASIC – [RGB]: outputs RGB signals. Note If your TV does not accept RGB signals, no picture appears on the TV screen even if you select [RGB]. Refer to the instructions supplied with your TV. A.CAL MIC 10 Press ENTER. Calibration mic The Setup Display for selecting the speaker formation appears. 11 Press C/c to select the speaker formation image as the speakers are actually positioned, then press ENTER. For details, see “Getting Optimal Surround Sound for a Room” (pa
ページ18に含まれる内容の要旨
13 Unplug the calibration mic and press C/ c to select [YES]. Quick Setup is finished. All connections and setup operations are complete. Measurement complete. FRONT L : YES FRONT R : YES CENTER : NONE SUBWOOFER : YES SURROUND L : NONE SURROUND R : NONE If OK, unplug calibration mic and select YES. YES NO Note If measurement fails, follow the message then retry [AUTO CALIBRATION]. To quit the Quick Setup Press DISPLAY in any Step. Tip If you change the position of the speakers, reset the
ページ19に含まれる内容の要旨
Getting Started – ADVANCED – DEMO OFF: sets the demonstration mode off. Getting Started – ADVANCED – 4 Press ENTER. The setting is reflected. Turning off the 5 Press AMP MENU. Demonstration The AMP menu turns off. "/1 AMP MENU X/x/c ENTER After connecting the AC power cord (mains lead), the demonstration appears in the front panel display. When you press "/1 on the remote, the demonstration turns off. Note When you press "/1 on the system, the demonstration does not turn off. When yo
ページ20に含まれる内容の要旨
Installing the Speakers on 4.6 mm 3 ( / inch) 16 a Wall 10 mm 13 ( / inch) 32 1 Prepare screws (not supplied) that are suitable for the hole on the back of each speaker. See the illustrations below. 5 4 mm ( / inch) 32 3 30 mm (1 / inch) 16 Note Use screws that are suitable for the wall material and Hole on the back of 4.6 mm the speaker strength. As a plaster board wall is especially fragile, 3 ( / inch) 16 attach the screws securely to a beam and fasten them to the wall. Install th
