ページ1に含まれる内容の要旨
MODEL G0548Z/G0548ZP
G1028Z2/G1029Z2/G1029Z2P
DUST COLLECTOR
OWNER'S MANUAL
(For models manufactured since 9/11)
G0548Z G1028Z2/G1029Z2
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
ページ2に含まれる内容の要旨
This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators. Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death. The owner of this machine/tool is solely responsible for its safe use. This responsibility includes but is not limited to
ページ3に含まれる内容の要旨
Table of Contents INTRODUCTION ............................................... 2 SECTION 6: ACCESSORIES ......................... 34 SECTION 7: MAINTENANCE ......................... 36 SECTION 1: SAFETY ....................................... 7 SECTION 8: SERVICE ................................... 38 SECTION 9: WIRING ...................................... 40 SECTION 2: POWER SUPPLY ...................... 10 SECTION 3: SETUP ....
ページ4に含まれる内容の要旨
INTRODUCTION Manual Accuracy Contact Info your machine may not exactly match the manual Machine Description www.grizzly.com
ページ5に含まれる内容の要旨
Components and Terminology G1028Z2, G1029Z2/Z2P G0548Z/ZP To reduce the risk of serious injury when using this machine, read and understand this entire manual before beginning any operations. Figure 1.
ページ6に含まれる内容の要旨
MODEL G0548Z, G0548ZP, G1028Z2, G1029Z2, G1029Z2P DUST COLLECTORS Model Number G0548Z/G0548ZP G1028Z2 G1029Z2/G1029Z2P Product Dimensions Shipping Dimensions Carton 1 Carton 2 Electrical
ページ7に含まれる内容の要旨
Model Number G0548Z/G0548ZP G1028Z2 G1029Z2/G1029Z2P Main Motor Operation Information Bag Information Impeller Information
ページ8に含まれる内容の要旨
Model Number G0548Z/G0548ZP G1028Z2 G1029Z2/G1029Z2P Construction Other
ページ9に含まれる内容の要旨
SECTION 1: SAFETY For Your Own Safety, Read Instruction Manual Before Operating this Machine The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words intended to convey the level of impor- tance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures. Indica
ページ10に含まれる内容の要旨
DISCONNECTING POWER SUPPLY. GUARDS & COVERS. NEVER STAND ON MACHINE. APPROVED OPERATION. STABLE MACHINE. DANGEROUS ENVIRONMENTS. AWKWARD POSITIONS. ONLY USE AS INTENDED. UNATTENDED OPERATION. OFF USE RECOMMENDED ACCESSORIES. MAINTAIN WITH CARE.
ページ11に含まれる内容の要旨
Additional Safety for Dust Collectors INTENDED USE. SUSPENDED DUST PARTICLES AND IGNITION SOURCES. AVOIDING SPARKS. HAZARDOUS DUST. OFF WEAR A RESPIRATOR. OPERATING LOCATION. IMPELLER HAZARDS. FIRE SUPPRESSION.
ページ12に含まれる内容の要旨
SECTION 2: POWER SUPPLY Availability Circuit Information For your own safety and protection of property, consult an electrician if you are Electrocution, fire, or unsure about wiring practices or electrical equipment damage may codes in your area. occur if machine is not correctly grounded and Note: The circuit requirements listed in this man- connected to the power ual apply t
ページ13に含まれる内容の要旨
G1028Z2 Circuit Requirements for 120V Operation (Prewired) Serious injury could occur if you connect the machine to power before completing the setup process. DO NOT connect to power until instructed later in this manual. Nominal Voltage ........................................120V Cycle ..........................................................60 Hz Circuit Requirements for G0548Z/ Phase ........................................... Single-Phase G0548ZP/G1029Z2/G1029Z2P
ページ14に含まれる内容の要旨
G1028Z2 Circuit Requirements for Extension Cords 240V Operation Voltage Conversion Nominal Voltage ........................................240V Cycle ..........................................................60 Hz Phase ........................................... Single-Phase Circuit Rating ...................................... 15 Amps Plug/Receptacle ............................. NEMA 6-15 For 240V operation:
ページ15に含まれる内容の要旨
4. Figure Voltage Conversion (G1028Z2 Only) 6 Page 42 IMPORTANT: If the diagram included on the motor conflicts with the one on Page 42, the motor may have changed since the manual was printed. Use the diagram included on the motor junction box cover instead. Items Needed Qty Figure 6. To convert the Model G1028Z2 to 240V: 5. 1. 6. 2. 3.
ページ16に含まれる内容の要旨
SECTION 3: SETUP Needed for Setup This machine presents serious injury hazards to untrained users. Read through this entire manu- al to become familiar with Description Qty the controls and opera- tions before starting the machine! Unpacking Wear safety glasses dur- ing the entire setup pro- cess! please call us immediately This machine and its com- at (570) 546-9663 for advice. ponents are very he
ページ17に含まれる内容の要旨
Box 2: (Figure 8) Qty G0548Z/G0548ZP J. K. Inventory L. M. Box 1: (Figure 7) Qty A. B. C. D. E. F. Figure 8. G. H. NOTICE If you cannot find an item on this list, care- fully check the machine and the packaging materials. Some of these items may be pre- installed for shipping or become misplaced during unpacking. I. Figure 7.
ページ18に含まれる内容の要旨
G1028Z2/G1029Z2/ G1029Z2P Inventory Box Components: Qty A. B. C. D. E. F. G. H. I. J. K. L. M. N. O. Not Shown: Qty Figure 9. G1028Z2/G1029Z2/G1029Z2P inventory. NOTICE If you cannot find an item on this list, care- fully check the machine and the packaging materials. Some of these items may be pre- installed for shipping or become misplaced during unpacking.
ページ19に含まれる内容の要旨
Site Considerations G0548Z/G0548ZP Assembly Floor Load Machine Data Sheet To assemble your dust collector: 1. 2. Figure 11 Placement Location Figure 10 Figure 11. 3. Figure 12 Figure 10. Children and visitors may be seriously injured if unsuper- vised around this machine. Lock entrances to the shop or disable start switch or po
ページ20に含まれる内容の要旨
4. 6. Figure 13 Figure 15 Figure 13. 5. Figure 14 Figure 15. 7. Figure 16 Figure 14. Figure 16. 8. Figure 16
