ページ1に含まれる内容の要旨
DUST COLLECTOR
ACCESSORY KIT
93601
ASSEMBLY & OPERATING INSTRUCTIONS
Due to continuing improvement, actual product may differ slightly from product described herein.
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web Site at www.harborfreight.com
©
®
Copyright 2005 by Harbor Freight Tools . All rights reserved. No portion of this manual or
any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.
For technical que
ページ2に含まれる内容の要旨
THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the owner’s record below: Model______________ Serial No._____________ Purchase Date_______________ SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire manual to become familiar with the unit BEFORE you begin assembly. Technical Specifications Material: ABS Thermoplastic, low carbon steel clamps, ply vinyl flex hose Hose Dimensions: (2) 4” diameter x 10’ Also incl
ページ3に含まれる内容の要旨
10. Always check hardware and assembled parts after assembling. All connections should be tight and hardware tightened. 11. Caution: Avoid sharp edges during use and assembly. 12. Beware of operating the power tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or sawdust. Electrical products create sparks which may ignite sawdust released from the Dust Collector, as well as other dust and fumes. 13. Carefully inspect the condition of the accessory before use a
ページ4に含まれる内容の要旨
Assembly 1. Though the Dust Collector Accessory Kit is designed to offer a wide variety of applications, the following illustration depicts a typical assembly method to hook-up one power equipment tool and two power equipment tools-see Figure 1 below. 2. Note: The Dust Collector Accessory Kit is designed to be attached to stationary power equipment tools and dust collectors having 4” diameter dust ports. Depending on the diameter of the dust port of your power equipment tools and dust collecto
ページ5に含まれる内容の要旨
Inspection, Maintenance and Cleaning 1. CAUTION: Prior to performing any inspection, maintenance, or cleaning of the Dust Collector Accessory Kit, make sure to turn OFF and then disconnect the power tool from the outlet. 2. BEFORE EACH USE, inspect the general condition of the Dust Collector Accessory Kit. Check for loose connections, misalignment or binding of moving parts, cracked, torn, or broken parts, and any other condition that may affect its safe operation. If abnormal noise or vibratio
