ページ1に含まれる内容の要旨
model g 0710
1hp Wall hanging dust
collector
o Wner 's manual
Copyright © JUL y, 2010 By g rizz Ly ind Ustria L, in C.
Warning: no portion of this manual may be reproduced in any shape
o r form Without the Written approval of g rizzly industrial, inc.
(for ma Chines mfg 6/10+) #C r 13051 printed in tai Wan
ページ2に含まれる内容の要旨
This manual provides critical safety instructions on the proper setup, operation, maintenance and service of this machine/equipment. Failure to read, understand and follow the instructions given in this manual may result in serious personal injury, including amputation, electrocution or death. The owner of this machine/equipment is solely responsible for its safe use. This responsibility includes but is not limited to proper installation in a safe environment, personnel training and usage
ページ3に含まれる内容の要旨
t able of c ontents introduction ............................................................................................................................... 2 manual accuracy ........................................................................................................................ 2 Contact info ................................................................................................................................ 2 machine description ..................................
ページ4に含まれる内容の要旨
introduction manual a ccuracy c ontact info We are proud to offer this manual with your new We stand behind our machines. If you have any machine! We've made every effort to be exact service questions, parts requests or general ques- with the instructions, specifications, drawings, tions about the machine, please call or write us at and photographs of the machine we used when the location listed below. writing this manual. However, sometimes we still make an occasional mistake. Grizzly Indust
ページ5に含まれる内容の要旨
machine data sheet mACHIN e d ATA SH T © Grizzly Industrial, Inc. • Customer Service: (570) 546-9663 • Orders: (800) 523-4777 model G0710 1 HP WAll moUNT dUST ColleCToR Product Dimensions: Weight .............................................................................................................................................................................51 lbs. Length/Width/Height ....................................................................................................
ページ6に含まれる内容の要旨
Bag Information Upper Bag Capacity ..............................................................................................................................................2 cu. ft. Upper Bag Diameter ...........................................................................................................................................13-1/2 in. Upper Bag Length ...............................................................................................................................
ページ7に含まれる内容の要旨
section 1: safety For Your Own Safety, Read Instruction Manual Before Operating this Machine The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures. Indicat
ページ8に含まれる内容の要旨
Safety Instructions for Machinery DISCONNECTING POWER SUPPLY. Always APPROVED OPERATION. Untrained operators disconnect machine from power supply before can be seriously hurt by machinery. Only allow servicing, adjusting, or changing cutting tools trained or properly supervised people to use (bits, blades, cutters, etc.). Make sure switch is machine. When machine is not being used, dis- in OFF position before reconnecting to avoid an con
ページ9に含まれる内容の要旨
a dditional safety instructions for dust collectors machine use. this machine is intended to only avoiding fires. do not allow steel particles collect wood dust and chips from woodworking to strike the impeller—this may produce a spark. machines. do not use this dust collector as a sparks can smolder in the wood dust for a long vacuum or with machines producing dust/chips time before the fire or flame is detected. if you from metal, asbestos products, lead paint, silica accidentally collect
ページ10に含まれる内容の要旨
section 2: po Wer supply availability circuit information Before installing the machine, consider the avail- A power supply circuit includes all electrical equip- ability and proximity of the required power supply ment between the main breaker box or fuse panel circuit. If an existing circuit does not meet the in your building and the incoming power connec- requirements for this machine, a new circuit must tions at the machine. This circuit must be sized to be installed. To minimize the risk o
ページ11に含まれる内容の要旨
grounding requirements In the event of certain types of malfunctions or breakdowns, grounding provides a path of least Serious injury could occur if you connect resistance for electric current—in order to reduce the machine to power before completing the the risk of electric shock. setup process. DO NOT connect to power until instructed later in this manual. For 110V operation: This machine is equipped with a power cord that has an equipment-ground- Improper connection of the equipment-gr
ページ12に含まれる内容の要旨
section 3: setup unpacking t his machine presents serious injury hazards your machine was carefully packaged for safe to untrained users. r ead transportation. r emove the packaging materials through this entire manu- from around your machine and inspect it. if you al to become familiar with discover the machine is damaged, please imme- the controls and opera- diately call Customer Service at (570) 546-9663 tions before starting the for advice. machine! save the containers and all pack
ページ13に含まれる内容の要旨
hardware r ecognition c hart -11- model g 0710 d ust Collector (mfg. since 6/10+)
ページ14に含まれる内容の要旨
site c onsiderations Weight Load Physical Environment Refer to the Machine Data Sheet for the weight The physical environment where your machine of your machine. Make sure that the surface upon is operated is important for safe operation and which the machine is placed will bear the weight the longevity of its components. For best results, of the machine, additional equipment that may be operate this machine in a dry environment that is installed on the machine, and the heaviest work- free f
ページ15に含まれる内容の要旨
—i f the dust collector will be mounted to a assembly wood framed wall (with or without drywall), the mounting bracket must be mounted directly to a support panel that is wide t o prevent the dust collection bag from hanging enough to span and connect to two wall free and stretching, the bottom must be support- studs. the bracket then fastens to the ed. also for adequate motor cooling, the motor fan panel. next, the panel fastens to the wall intake must not be restricted by a wall or ca
ページ16に含まれる内容の要旨
Be sure that you extend the bare copper wire c ollection system down all branches of the system. do not forget to connect the wires to each other with wire nuts when two branches meet at a “y” or “t” connec- material selection tion. you have many choices regarding dust collection ensure that the entire system is grounded. if ducting, but flexible hose is the most common for using plastic blast gates to direct air flow, the this size of machine. h owever, be aware that there grounding wi
ページ17に含まれる内容の要旨
if your machine doesn't have a built in dust port, dust collection use figure 11 to verify which size of ducting to since each machine produces a different amount install on your machine. of sawdust, the requirements for the minimum amount of Cfm to move that sawdust is unique to the machine (for example, a planer produces machine average dust port size more sawdust than a table saw). Knowing this required Cfm is important to gauging which size t able saw ..................................
ページ18に含まれる内容の要旨
4. Verify that the machine is operating correctly t est r un by turning the machine ON. —When operating correctly, the machine runs smoothly with little or no vibration or rubbing noises. do not put hands or —i nvestigate and correct strange or unusual small objects near inlet noises or vibrations before operating the openings during opera- machine further. always disconnect the tion. o bjects sucked machine from power when investigating or into the inlet will hit the correcting poten
ページ19に含まれる内容の要旨
section 4: operations NOTICE t o reduce the risk of if you have never used this type of machine serious injury when using or equipment before, We strongly rec- this machine, read and ommend that you read books, trade maga- understand this entire zines, or get formal training before begin- manual before beginning ning any projects. r egardless of the con- any operations. tent in this section, g rizzly industrial will not be held liable for accidents caused by lack of training. damage to
ページ20に含まれる内容の要旨
section 5: accessories 1 h1049—clear flexible hose 2 ⁄2" x 10' g3181—dust collection Kit #1 h1052—clear flexible hose 4" x 10' designed for a one machine hook-up, kit #1 1 g3123—black flexible hose 2 ⁄2" x 10' comes complete with installation instructions and g1536—black flexible hose 4" x 10' an accessories list for expanding your dust collec- 1 g3124—Wire hose clamp 2 ⁄2" tion system in the future. g2974—Wire hose clamp 4" 1 g3119—dust collection adapter 2 ⁄2" x 4" g1843—plastic blast gate 4
