ページ1に含まれる内容の要旨
user manual
Dishwasher
WSF6602
ページ2に含まれる内容の要旨
2 westinghouse Electrolux. Thinking of you. Westinghouse. We are part of the Electrolux family. Share more of our thinking at www.electrolux.com CONTENTS Safety information 2 Care and cleaning 14 Product description 4 What to do if… 15 Control panel 5 Technical data 17 Use of the appliance 6Installation 17 Use of detergent and rinse aid 6 Water connection 18 Loading cutlery and dishes 7 Electrical connection 19 Setting and starting a washing program Environment concerns 19 11Warran
ページ3に含まれる内容の要旨
westinghouse 3 • Always close the door when you do not • Remove all packaging before first use. use the appliance to prevent injury and • A qualified and competent person must not to stumble over the open door. do the electrical installation. • Do not sit or stand on the open door. • A qualified and competent person must do the plumbing installation. CHILD SAFETY • Do not change the specifications or mod- • This appliance is not intended for use by ify this product. Risk of injury and dam- young
ページ4に含まれる内容の要旨
4 westinghouse PRODUCT DESCRIPTION 9 1 8 2 7 6 3 4 5 Upper basket Filters 1 6 Air vent Lower spray arm 2 7 Detergent dispenser Upper spray arm 3 8 Rinse aid dispenser Worktop 4 9 Rating plate 5
ページ5に含まれる内容の要旨
westinghouse 5 CONTROL PANEL 1 2 3 4 8 7 6 5 On/off button 1 Program indicators 2 Display 3 Indicators 4 START indicator 5 START button 6 DELAY button 7 PROGRAM button 8 Indicators Button LOCK indicator. It comes on when the 'Button LOCK' function is activa- ted. Rinse Aid indicator. It comes on when it is necessary to fill the rinse aid dispenser. 1) 1) When the rinse aid dispenser is empty, the related indicator does not come on while a washing program operates. ON/OFF BUTTON • Start the count
ページ6に含まれる内容の要旨
1 X 2 6 westinghouse to 'Setting and starting a washing pro- • To set and start a delay start. gram'. Switch on the appliance. The appliance is in setting mode when: PROGRAM BUTTON • All the program indicators come on. Press this button repeatedly to set a wash- Switch on the appliance. The appliance ing program. Each time you press this but- is not in setting mode when: ton, a symbol that is related to a washing • Only one program indicator comes on. program comes on. Refer to 'Washing pro- • T
ページ7に含まれる内容の要旨
westinghouse 7 Rinse aid makes it possible to dry the Wash hands to remove any residue of dishes without streaks and stains. rinse aid from skin. Rinse aid is automatically added during the USE OF COMBI DETERGENT TABLETS last rinsing phase. Follow these steps to fill the rinse aid dis- These products are detergents with com- penser: bined cleaning and rinsing functions. They can contain also other cleaning agents. Filling with rinse aid Refer to the instructions from the manufac- 1. Press the re
ページ8に含まれる内容の要旨
8 westinghouse LOADING THE CUTLERY BASKET Warning! Do not put long-bladed knives in a vertical position. Arrange long and sharp cutlery horizontally in the upper basket. Be careful with sharp items. Forks and spoons should be placed in the removable cutlery basket with the handles facing downwards and the knives with their handles facing upwards Mix spoons with other cutlery to prevent XXL them from nesting together. For best results we recommend you use the cutlery grids. If the size and dimens
ページ9に含まれる内容の要旨
westinghouse 9 LOADING THE UPPER BASKET The upper basket is for plates, saucers, sal- ad bowls, cups and glasses. Arrange the items to let water touch all surfaces. Put glasses with long stems in the cup racks with the stems up. For longer items, fold the cup racks up. 25 cm 14 cm
ページ10に含まれる内容の要旨
10 westinghouse Follow these steps to move the upper ADJUSTING THE HEIGHT OF THE basket to the upper position: UPPER BASKET 1. Pull the basket out until it stops. If you put large plates in the lower basket, 2. Carefully lift the two sides until the first move the upper basket to the upper mechanism is engaged and the basket position. is stable. Follow these steps to move the upper basket to the lower position: 1. Pull the basket out until it stops. 2. Carefully lift the two sides upwards, the m
ページ11に含まれる内容の要旨
westinghouse 11 SETTING AND STARTING A WASHING PROGRAM STARTING THE WASHING PROGRAM If the START button has been pressed WITHOUT DELAY START and the countdown operates •Press the DELAY button repeatedly until 1. Close the appliance door. the display shows the time of the wash- 2. Switch on the appliance. Make sure that ing program. After a few seconds the the appliance is in setting mode. washing program starts automatically. 3. Set a washing program. Refer to 'Wash- ing programs'. Warning! Only
ページ12に含まれる内容の要旨
12 westinghouse • There can be water on the sides and door of the appliance. Stainless steel be- comes cool more quickly than the dishes.
ページ13に含まれる内容の要旨
westinghouse 13 WASHING PROGRAMS Program Type of soil Type of load Program description RINSE Use this program to quickly rinse the Rinse dishes. This prevents the remaining food to bond on the dishes and bad odours to come out from the appliance. Do not use detergent with this program. 1) Fresh soil Crockery and cutlery Wash 60 °C FAST30 Rinse 2) Normal soil Crockery and cutlery Prewash NORMAL ECO Wash 50 °C Rinses Dry NORMAL 65° Normal soil Crockery and cutlery Prewash Wash 65°C Rinses Dry HE
ページ14に含まれる内容の要旨
14 westinghouse CARE AND CLEANING TO REMOVE AND CLEAN THE FILTERS 7. Put filter (B) to its initial position. Make sure that it assembles correctly under Warning! Switch the appliance off the two guides (C). before you carry out any cleaning operation. C Dirty filters decrease the washing results. Although the maintenance is very low with these filters, we recommend that you regu- larly check the filters and clean them if nec- essary. 1. To remove filter (A), turn it counterclock- wise and remove
ページ15に含まれる内容の要旨
westinghouse 15 FROST PRECAUTIONS 2. Close the water tap. 3. Remove the appliance and the hoses. Caution! Do not install the appliance 4. Do not tilt the appliance during trans- where the temperature is below 0 °C. port. The manufacturer is not responsible for damage caused by frost. MOVING THE APPLIANCE 1. Disconnect the mains plug from the mains socket. WHAT TO DO IF… The appliance does not start or stops dur- • - The appliance does not fill with wa- ing operation. ter If there is a fault, fi
ページ16に含まれる内容の要旨
16 westinghouse After the check, switch on the appliance. When you contact the Customer Care Cen- The program continues from the point of in- tre you will need to give some details of the terruption. If the malfunction occurs again, appliance that can be found on the rating contact your Customer Care Centre. plate (e.g. model number, serial number, If the display shows an alarm code, not de- product number). We recommend that you scribed in the chart, contact your Customer record these details.
ページ17に含まれる内容の要旨
westinghouse 17 TECHNICAL DATA Dimensions Width 596 mm Height 850 mm Depth 620 mm Electrical connection Voltage 220-240 V Overall power 2200 W Fuse 10 A Frequency 50 Hz Water supply pressure min. 50 kPa (7 psi) max. 800 kPa (116 psi) Capacity Place settings 13 INSTALLATION FITTING UNDER A KITCHEN COUNTER REMOVING THE WORKTOP 1. Remove the rear screws (1). Warning! Make sure that the mains plug is disconnected from the mains socket during installation. Put the appliance adjacent to a water tap an
ページ18に含まれる内容の要旨
18 westinghouse If the door does not close correctly, loosen or tighten the adjustable feet to level the ap- pliance. WATER CONNECTION WATER INLET HOSE Parts. The extension length must not ex- ceed 2 metres. Connect the appliance to a cold water sup- The drain hose must be free of obstruc- ply. tions. Connect the inlet hose to a water tap with Remove the sink plug when the appliance an external BSP thread spout of 3/4”. drains the water to prevent that the water Once connected the inlet hose to
ページ19に含まれる内容の要旨
westinghouse 19 ELECTRICAL CONNECTION Warning! can constitute a fire hazard through • The manufacturer accepts no liability overheating. for failure to observe the below safe- • If necessary, have the domestic wir- ty precautions. ing system socket replaced. If the • Safety standards require the appli- mains cable has to be replaced, con- ance to be earthed. tact your local Customer Care cen- • Prior to using the appliance for the tre. first time, ensure that the rated volt- • The mains plug mus
ページ20に含まれる内容の要旨
20 westinghouse WARRANTY lowing the date of original pur- chase of the Appliance; – this Appliance is not designed for FOR SALES IN AUSTRALIA AND NEW commercial use and therefore no ZEALAND warranty applies in this case; APPLIANCE: DISHWASHER h) ‘you’ means the purchaser of the This document sets out the terms and Appliance not having purchased the conditions of the product warranties Appliance for re-sale, and ‘your’ has for Electrolux Appliances. It is an im- a corresponding meaning. portant d
