ページ1に含まれる内容の要旨
JLDWW 1203
dishwasher
Instruction manual
ページ2に含まれる内容の要旨
1 Important Safety Information It is most important that this instruction book should be retained with the appliance for fu- ture reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appli- ance in order that the new owner can get to know the functioning of the appliance and the relevant warnings. These warnings have been provided in the interest of safety. You MUST read them
ページ3に含まれる内容の要旨
Maintenance and cleaning The symbol W on the product or on its packaging indi- cates that this product should not be treated as normal All filters must be checked and cleaned on a regular basis household waste. Instead it shall be handed over to the ap- - dirty filters will degrade the wash performance of the plicable collection point for the recycling of electrical and dishwasher. For information on maintaining and cleaning electronic equipment. By ensuring this product is disposed your dishw
ページ4に含まれる内容の要旨
Contents For the User For the Installer Important Safety Information 2 Installation 6 · Installation 2 · Technical Data 6 · Unpacking 7 · Child Safety 2 · Use 2 Water connections 7 · Maintenance and cleaning 3 · Water outlet hose connection 7 · Service 3 · Fitting under a counter 8 · Ecological hints 3 · Levelling the Dishwasher 9 · Environmental Information 3 Electrical connection 10 Description of the Appliance 5 · Permanent connection 10 The Control Panel 11 When the dishwasher is first ins
ページ5に含まれる内容の要旨
Description of the Appliance Ceiling spray arm Cutlery tray Upper basket spray arm and lower spray arm Water softener unit. Salt Container Detergent Dispenser Rinse aid dispenser Rating plate Filters 5
ページ6に含まれる内容の要旨
Installation 1 It is dangerous to alter the specifications or attempt to modify this product in any way. 1 Care must be taken to ensure that the appliance does not stand on the electrical supply cable. 1 Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. 1 Any plumbing work required to install this appliance should be carried out by a qualified plumber or com- petent person. Technical Data Width 59,8 cm Height 85 cm Dimens
ページ7に含まれる内容の要旨
Unpacking Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. Water connections We recommend that this dishwasher is connected to your Extension hoses cold water supply. Extension hoses are available from your local Service For making the connection itself, the coupling nut fitted to Force Centre. To ensure that the function of the appliance the machine’s supply hose is designed to screw onto either is not impeded, the int
ページ8に含まれる内容の要旨
Connecting Systems The water inlet hose, drain hose and the mains cable must all be connected to the side of the dishwasher as there is no space for them behind the appliance. 2 connection pieces 45° or straight, double valve waterdrainage water inlet outer ø 19 mm, length 30 mm waterinlet mains waterdrainage mains socket mains cable cable Fitting under a counter (kitchen worktop or sink) By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre-existing top,
ページ9に含まれる内容の要旨
Proceed as follows: Levelling the Dishwasher The dishwasher must be installed on a firm floor and ad- justed to ensure that it is stable and level in all directions. To overcome irregularities in the floor and to match the height of the appliance to that of surrounding units, ex- tend the threaded feet using a screwdriver. 1.Unscrew the screws from the elbows at the rear (1). 2.Push the appliance’s worktop backwards about 1 cm (2). 3.Lift the worktop at the front (3) and remove it. Insert
ページ10に含まれる内容の要旨
Electrical connection Any electrical work required to install this appliance should 1 WARNING: be carried out by a qualified electrician or competent per- son. A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut off plug is disposed of safely. 1 WARNING: THIS APPLIANCE MUST BE EARTHED. Should the appliance power supply cable need 1 The plug must still be accessible after the ap- to be replaced, this must be carried out by a pliance has been i
ページ11に含まれる内容の要旨
The Control Panel 7 8 5 6 1 3 1 23 4 9 10 11 4 2 1. On/Off indicator light 6. Programme time indicator light 2. On/Off button Illuminates with a back light when a washing programme has been set and remains illuminated until the appliance is switched off. When delay start has been set, this indicator 3. Function buttons light turns off and will illuminate once the countdown has elapsed and the washing programme has started. In addition to the dishwashing programme selected, the fol- lowing funct
ページ12に含まれる内容の要旨
8. Control indicator lights salt refilling indicator light, illuminates Salt: when the salt has run out rinse aid refilling indicator light, illumi- Rinse aid:: nates when the rinse aid has run out The salt and rinse aid indicator lights are never illuminated while a washing programme is running even if filling with salt and rinse aid is necessary. 9. Delay start button This option allows the start of the programme to be de- layed from 1 to 19 hours. 10. Multi tab button This appliance is equi
ページ13に含まれる内容の要旨
When the dishwasher is first installed Before using your dishwasher for the first time: The Water Softener 1.Ensure that the electrical and water connections comply with the installation instructions To avoid scale deposits on the dishes and in the dishwasher, the dishes must be washed with soft water, i.e. water with a 2.Remove all packaging from inside the appliance low lime content. 3 If you wish to use 3 in 1 detergent: The dishwasher is equipped with a water softener designed – First read t
ページ14に含まれる内容の要旨
If the water softener is set electronically to “1”, this switches off Setting the Water Softener the control indicator for dishwasher salt. The water softener must be set manually and electronically: Filling with dishwasher salt a) Setting manually Only use salt specifically designed for use in dish- The dishwasher must be switched off. washers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will dam- age the water softener. Only fill with sal
ページ15に含まれる内容の要旨
Rinse Aid Adjusting the dose Rinse aid is automatically added during the last rinse. According to the finish and drying results obtained, adjust Rinse aid will ensure the water flows away easily from the the dose of rinse aid by means of the 6 position selector crockery, ensuring thorough rinsing, spot and streak free, (position 1 minimum dosage, position 6 maximum dosage). leaving gleaming dishes and glassware. The dose is factory set in position 4. The dispenser which is positioned inside the
ページ16に含まれる内容の要旨
Activating rinse aid inflow when “Multi tab“ function is selected 3 If the “Multi tab“ function is not selected, the rinse aid inflow is always activated. If the “Multi tab“ function is selected due to the use of 3in1 detergent, the rinse aid inflow is deactivated. If the dishes then do not dry sufficiently, you should re-activate the rinse aid inflow (see also section “Using 3in1 detergents”). 1.Press the ON/OFF button. 3 If indicators for the programme buttons are lit, a dishwashing cycle is
ページ17に含まれる内容の要旨
Using the Dishwasher Check if it’s necessary to refill with dishwasher salt or Loading Cutlery and Dishes rinse aid. Load cutlery and dishes into the dishwasher. 1 Sponges, cleaning cloths and any other ob- Fill with dishwasher detergent . jects that can absorb water must not be washed in the dishwasher. Select a wash programme suitable for the cutlery and dishes. Plastic and Teflon-coated dishes and pans tend to retain water droplets. These dishes and Start the wash programme. pan
ページ18に含まれる内容の要旨
Open the door and slide out the baskets to load the dishes. If the handles protrude from the bottom of the basket, ob- structing the lower spray arm, load the cutlery with the handles facing upwards. Mix spoons with other cutlery to The lower basket prevent them from sticking together. . The lower basket is designed to take saucepans, lids, plates, salad bowls, cutlery etc. For best results we recommend you to use the cutlery grid provided (if the size and dimensions of the cutlery allow it).
ページ19に含まれる内容の要旨
For glasses with long stems (according to the size and di- The upper basket mensions), fold the glass rack to the right, otherwise fold it away to the left. The upper basket is designed for plates (dessert plates, sau- cers, dinner plates of up to 24 cm in diameter), salad bowls, cups, glasses and for long, sharp cutlery. The row of spikes on the left of the upper basket is also in two parts and can be folded away. Spikes not folded away: place glasses, mugs etc. in the up- per basket. Spike
ページ20に含まれる内容の要旨
Adjusting the Height of the Upper Basket If washing very large plates you can load them in the lower basket after moving the upper basket to the higher position. Maximum height of dishes in the upper basket lower basket with upper basket raised 22 cm 30 cm with upper basket lowered 24 cm 29 cm 3 The height of the baskets can also be adjusted when they are loaded. Raising / Lowering the upper basket 2.Fill the detergent dispenser (2) with detergent. The mark- ing indicates the dosing levels: 20
