Jackson Dishmachine Stand M24STD-6の取扱説明書

ページ1に含まれる内容の要旨

Dishmachine Stand


Installation Instructions


FOR JACKSON MODEL:


M24STD-6
Jackson MSC, INC.
P.O. BOX 1060
HWY. 25E
BARBOURVILLE, KY. 40906
FAX (606) 523-9196
August 7, 2006
PHONE (606) 523-9795
P/N 07610-003-26-13 Rev. A
www.jacksonmsc.com

ページ2に含まれる内容の要旨

M24STD-6 INSTALLATION INSTRUCTIONS Tools Required: • Standard Allen wrench set • Tube of food-grade silicon • Silicon gun • Rag Time Requirements: It is expected that it will take 30 minutes to install the M24STD-6 dishmachine stand. Notes: • Ensure that the dishmachine stand is Figure 1—Leg socket showing set screw level prior to placing the dishmachine on the stand. • Place the legs fully into the leg sockets • Never attempt to lift a dishwasher on of the platform and tig

ページ3に含まれる内容の要旨

M24STD-6 INSTALLATION INSTRUCTIONS Figure 3—Applying silicon • To mount the undercounter dishmachine, remove the feet from the frame bottom by un- screwing them. •Set the unit on top of the stand (minus the feet) on the platform, lining up the holes in the frame to the corresponding holes in the plat- form. •Secure the unit to the platform by rein- serting and tightening the feet. •Verify that the unit is level prior to making any utility connectio