ページ1に含まれる内容の要旨
Dishwasher
Instruction for installation and use
DE 43
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
ページ4に含まれる内容の要旨
ページ5に含まれる内容の要旨
Salt ...... Salt Adjusting Salt Consumption The hardness of the water varies from place to place. If The dishwasher is designed to allow for adjusting the hard water is used in the dishwasher, deposits will form on amount of salt consumed based the dishes and utensils. on the harness of the water The appliance is equipped with a special softener that uses used. This is intended to a salt specifically designed to eliminate lime and minerals optimize and customize the from the water. level of sal
ページ6に含まれる内容の要旨
Detergent and Rinse Aid .... Detergent Rinse Aid Detergent specifically intended for use with dishwashers This product makes dishes sparkle more as it improves their must be used. The dispenser must be refilled before the drying. The rinse aid container is situated on the inside of start of each wash cycle following the instructions provided the appliance door; you should refill it when you see the in the "Wash Cycle Table." The detergent dispenser is container is empty by means of indicator “D
ページ7に含まれる内容の要旨
Loading the Dishwasher Load examples Before placing the dishes in the dishwasher, remove the larger food particles to prevent the filter from becoming Top Rack Top Rack clogged, which results in reduced performance. If the pots and pans have baked-on food that is extremely hard to remove, we recommend that they be allowed to soak before they are washed. This will eliminate the need for extra wash cycles. Pull out the racks to facilitate loading the dishwasher. How to Use the Lower Rack We recomm
ページ8に含まれる内容の要旨
Turning on the Appliance How to start a wash cycle this point, all the settings will have been cancelled. After performing all the operations described in the previous To select a new wash cycle, repeat the instructions contained chapters, turn the water tap on completely, press ON-OFF in the paragraph entitled "Starting and setting the cycle". button "A"; you will hear a short beep and indicator light "B" will come on. You've left out a dish? The display turns on and 3 dashes appear: these indi
ページ9に含まれる内容の要旨
Setting a delayed start on a wash cycle When you have loaded the dishes, you can choose when to start your dishwasher before setting the wash cycle desired. l Press button "D" and you can delay the start of the wash cycle by 1 to 9 hours. Press the button once, a beep will sound and the wording "09 h" will come up on the display. Then, each time you press the button a beep will sound and the hours will decrease by one hour until the delay is 01 h. If you press the button once again, the delayed
ページ10に含まれる内容の要旨
Wash Cycle Table Detergent Rinse for pre- Aid wash + Cycle Cycle selection instructions Cycle description wash Pre-wash with cold water Pre-wash with hot water at 45°C Extended wash at 70°C. Very dirty dishes and pans Cold rinse 1) Intensive (not to be used for delicate 5+15 gr. * Rinse with hot water at 70°C. items). Drying. 2 pre-washes with cold water. Normally dirty pans and Extended wash at 55°C. 2) Normal 5+15 gr. * dishes. Standard daily cycle. Rinse with hot water at 70°C. Drying. Econom
ページ11に含まれる内容の要旨
Energy Saving Tips - Use the right amount of detergent: if you use too much - It is important to try and run the dishwasher when it is detergent, the result will not be cleaner dishes, but, rather, fully loaded in order to save on energy. In order to prevent a greater negative impact on the environment. odors from forming and food from caking onto the dishes, you can run the hold cycle. - There is no utility in rinsing dishes, cookware and utensils before placing them in the dishwasher. - Choose
ページ12に含まれる内容の要旨
Cleaning and Special Maintenance The filter assembly reinsert the whole assembly into the dishwasher, positioning If you want consistent good results from your dishwasher, it into its housing and pressing downwards. you need to clean the filter assembly; this way the food The dishwasher is not to be used without filters. Improper particles are replacement of the filters may reduce the efficiency of the removed from the wash and even damage your dishwasher. 1 wash water, allowing it to be Cleanin
ページ13に含まれる内容の要旨
Installation Positioning the Appliance Drain Hose Connection Position the appliance in the desired location. The back Insert the drain hose into a should rest against the wall behind it, and the sides, along drain pipe with a minimum the adjacent cabinets or wall. The dishwasher is equipped diameter of 4 cm., or let it run with water supply and drain hoses that can be positioned into the sink, making sure to to the right or the left to facilitate proper installation. avoid bending or crimping it
ページ14に含まれる内容の要旨
Electrical Connection Electrical Connection As the colours of the wires in the mains lead may not If your appliance is supplied with a 13 amp. fused plug it correspond with the coloured markings identifying the can be plugged into a 13 amp socket for immediate use. terminal in your plug, proceed as follows: Before using the appliance please read the instruction below. connect Green & Yellow wire to terminal market “E” or coloured Green or Green & Yellow. WARNING: THIS APPLIANCE MUST BE EARTHED.
ページ15に含まれる内容の要旨
ページ16に含まれる内容の要旨
Merloni Elettrodomestici Viale Aristide Merloni 47 60044 Fabriano Italy Tel +39 0732 6611 Fax +39 0732 662501 www.merloni.com 04/2002 - 195033207.00 - Xerox Business Services - DocuTech
