Gianni Industries Keyprox Plusの取扱説明書

ページ1に含まれる内容の要旨

Keyprox Plus
Access Control System
Features Statement
The system is based on a controller
Controller supports two readers.
that supports two Secure Card readers
Controller can control 2 independent
which can be mounted up to 50 meters
doors or a single door.
from the controller with a simple 3-wire
Use RS-232 or RS-485 to connect a
connection. The controller can be
single controller to a PC.
configured to operate a single door or two
Up to 16 controllers can be connected
independent doors.
using

ページ2に含まれる内容の要旨

2core 2core 2core 2core 2core 3core 3core 2core 2core 2core 2core Keyprox Plus Access Control System Application The KeyProx Plus controller has both a RS-232 and a RS-485 interface. Use the RS-232 interface for simple installation having a single controller and where the distance between the controller and the PC is less than 30 meters. The drawings below show typical RS-232 installations. RS-232 connection to PC - max 30m Single Door System 3core 2core RS-232 to PC 3core Door Sw 1 Door strike

ページ3に含まれる内容の要旨

2core 2core 2core 2core Total Cable Length Max. 1000 meters Maximum of 16 Controllers Keyprox Plus Access Control System RS-485 must be used where the distance between the controller Multi-Controller System and the PC isgreater than 30 meters or for installations of multiple controllers. The PC will require a 311 Interface/Repeater to interface the RS-232 from the PC to the 311 RS-232/485 RS-485 of the controller network. The drawing below shows a interface typical RS-485 installation. Power sup