ページ1に含まれる内容の要旨
Quick Network Setup Guide
WorkCentre M123/M128
WorkCentre Pro 123/128
701P42078
ページ2に含まれる内容の要旨
© 2004. All rights reserved. Copyright protection claimed includes all forms and matters of copyrighted material and information now allowed by statutory or judicial law or hereinafter granted, including without limitations, material generated from the software programs which are displayed on the screen, such as icons, screen displays, looks etc. ® ® ® Xerox , The Document Company , the digital X and all Xerox products mentioned in this publication are trademarks of Xerox Corporation. Prod
ページ3に含まれる内容の要旨
Table of Contents 1. QUICK NETWORK SETUP (DHCP) .............................................................4 PRE-REQUISITES FOR QUICK NETWORK SETUP USING TCP/IP:................................4 CONFIGURING M123/M128 IP ADDRESS VIA DHCP:..............................................4 PROCEDURE FOR QUICK NETWORK SETUP USING TCP/IP:......................................4 2. QUICK NETWORK SETUP (STATIC IP) ......................................................5 PROCEDURES FOR MANUAL SETUP
ページ4に含まれる内容の要旨
Quick Network Setup (DHCP) Quick Network Setup (DHCP) For WorkCentre M123/M128 WorkCentre Pro 123/128 The System Administrator Guide contains detailed information about Network setups. This document is intended for setting up the Network using TCP/IP. If using Novell IPX, then see the System Administrator Guide for setup procedures. Pre-requisites for quick Network Setup using TCP/IP: 1. Confirm that an existing operational network utilizing TCP/IP is available. 2. Confirm tha
ページ5に含まれる内容の要旨
Figure 1 NOTE: CentreWare Internet Services is a powerful tool for configuring the M123/M128 device remotely. The default user name is “x-admin” and password is “11111”. These should be changed after install. Step 4: Load the Print Drivers on the workstations that will be accessing the M123/M128 device. For more detailed instructions, see the System Administrator Guide. Quick Network Setup (Static IP) Quick Network Setup (Static IP) For: WorkCentre M123/M128 WorkCentre
ページ6に含まれる内容の要旨
Procedures for manual setup of network using Static IP Address: Step 1: Power on the M123/M128 device. Step 2: Select on “Login/Logout”. Enter the UserID (11111). Select “System Settings” “System Settings” “Network Settings” Protocol Settings. Step 3: Select “IP address” and Press “Change Settings”. Enter the IP address of the machine. If there is an incorrect IP address in the field hit the Clear button once to delete the incorrect IP address. For Example: To enter i
ページ7に含まれる内容の要旨
Figure 2 NOTE: CentreWare Internet Services is a powerful tool for configuring the M123/M128 device remotely. The default user ID is “11111” and password is “x-admin”. These should be changed after install . QNS Page 7 of 7 701P42078
