ページ1に含まれる内容の要旨
Club 8800
Quick Reference Setup Guide
This quick reference guide is provided to help you set up your CLUB-
8800 system for the first time. It contains instructions on setting up
the products that are included in the CLUB-8800. If you are connect-
ing any additional gear that is not included in the CLUB-8800, refer to
the appropriate manuals for detailed instructions.
Gathering Package Contents
The first step to putting together your new CLUB system is unpacking all of the necessary equipme
ページ2に含まれる内容の要旨
Setting up the speakers and speaker stands 1.Setup each SS-88 speaker stand by extending the support lefts to a position that is stable and tighten the tension mechanism firmly. 2. Place a VX-15 speaker on top of the SS-88 so that the shaft of the SS-88 fits flush into the mounting cavity on the bottom of the VX-15. NOTE: Each end of the SS-88 pole has a particular diameter fitted VX-15 Speaker for common speakers’ mounting cavities. If the SS-88 shaft does NOT fit flush into the mounting c
ページ3に含まれる内容の要旨
CDG-9000PRO player unit to KJ-7800PRO 2 You have the option of either connecting each deck of the CDG-9000PRO separately (Fig. 1) or together through a single SWITCHED output (Fig. 2). Separately through individual deck outputs (Fig.1) Using RCA cables: 1. For each deck, connect the L/R (red & white) audio outputs and Video (yellow) output on the CDG-9000PRO to the AV1 and AV2 inputs on the rear panel of the KJ-7800PRO KJ 7800 remote remote key control key control CDG 9000 Player Together thr
ページ4に含まれる内容の要旨
VP-2100PRO to VX-15 speakers 4 VP 2100 Speakers 1 and 2 -BRIDGE+ ���� ���� Using the SPEAKON style to ¼” adapter and ¼”(m) to ¼”(m) ������ ���� �� ������� ������� ���� ���� ��� ������ cable (included): � � � � � � � � � � � � � � � ����� ������ ������� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 1. Connect the SPEAKON style end to CH.1 on the rear panel of the VP-2100PRO 2. Connect one end of the ¼” cable to the ¼” end of the adapter 3. Connect the other end of the ¼” cable
