ページ1に含まれる内容の要旨
OWNER’S MANUAL
PD C21
www.pyleaudio.com
ページ2に含まれる内容の要旨
Front and Rear Panel Layout 1. INPUT – 1/4” input connector. 2. PARA OUT – It’s parallel output 1/4” jack for passing the input signal through to a stage amplifier or monitor system. 3. ATT Switch – input attenuation, switchable(0dB,-20dB,-40dB) 4. BALANCED OUTPUT – Male XLR connector. 5. GROUND – When engaged, the ground from the PDC21 chassis detaches from the XLR jack. -1-
ページ3に含まれる内容の要旨
Operating the PDC21 A direct box, or DI box, provides the facility for the direct insertion of an audio signal into a mixer or recorder. The PDC21 offers a variety of DI solutions for live sound and recording applications. You can connect all kinds of audio signals like guitars, keyboards, outboard signal processors and even the high-powered speaker output from an amplifier. The PDC21 enables you to tap off the signal from a guitar or bass guitar and pass the signal from the PARA OUTPUT
ページ4に含まれる内容の要旨
NOTE: TO avoid annoying pops and clicks be sure to mute (or turn down the volume control) of your mixer’s output while connecting the PDC21. Connecting to High Power Signals The PDC21 provides the capability of tapping off the signals from amplifiers, such as the output or guitar amp or power amplifier. You can even use PDC21 to connect to the speaker output of a consumer stereo system or boom box, for example, if you want to sample some old records or cassette tapes. NOTE: Be sure
ページ5に含まれる内容の要旨
NOTE: This example may appear to be the same as the previous, however in this example, the PDC21 is tapping the sound of the instruments and amp, as opposed to just the instrument itself. Converting the output of Unbalanced Devices -4-
ページ6に含まれる内容の要旨
The PDC21 can be quite useful on stage or in the studio for connecting unbalanced devices, particularly key boards. The output levels of many keyboards are low. So their signals can benefit greatly by connecting their unbalanced outputs to the PDC21 by doing so the signal can be sent cleanly for long distances while benefiting from the low noise and common mode rejection provided by PDC21’s balanced low-level output. The diagram following shows a typical hook-up for a stereo keyboard co
