ページ1に含まれる内容の要旨
TABLE OF CONTENTS
TABLE OF CONTENTS ................................................................................................. 2
SET UP: ............................................................................................................................. 3
OPERATION.................................................................................................. 3
CONTROLS AND INDICATORS:................................................................................. 4
ページ2に含まれる内容の要旨
SPECIAL FEATURES..................................................................................................... 9 SAFETY: REPLACING FUSES ..................................................................................................... 10 This product complies with DHHS Rules CFR21 Subpart J, applicable at the date of manufacture. Keep away from moisture. Do not operate if FRONT PANEL DIAGRAM.......................................................................................
ページ3に含まれる内容の要旨
There are three microphone input channels, (Channels 1, 2 & 3 on the Control Panel) and CASSETTE PLAYER: each channel has individual volume adjustment controls. See “Inputs and Outputs” section for more details. EJECT: PHANTOM POWER When this button is pressed, the door of the cassette compartment swings open to allow a tape to be inserted or removed. Close with a gentle push until a click is heard. The door If using Condenser type microphones, phantom power is required. To ope
ページ4に含まれる内容の要旨
MODE: TRACK SEARCH: To forward to the next track, press F-FWD once. The CD player will forward to the next The cassette player has three operating modes- CONTINUOUS LOOP (plays side A then side B over and over until stopped), AUTO REVERSE (plays side A, then side B and track each time the button is pushed. To search for previous tracks, press R-RWD. The stops), NORMAL (plays side A then stops). CD player will reverse to the next track each time the button is pushed. REPEAT DISC PLAY
ページ5に含まれる内容の要旨
microphone types, but only one microphone or instrument can be plugged into each The TRAVEL AUDIO PRO panel has ¼” phone jacks labeled ‘Record/Line Out’ and channel at a time. ‘Line Insert’ respectively. ‘Record/Line Out’ provides a feed from the Mixer stage, but before this signal goes through the Output stage. In other words, this signal is not affected You can add pre-recorded music during your presentations by using the internal CD or by settings on the music/voice switch, treble, bass
ページ6に含まれる内容の要旨
Front Panel Diagram Troubleshooting Problem Items to check Unit will not turn on • Is unit plugged in? • Are batteries charged? • Are fuses blown? Unit operates on AC but not on battery • Check battery terminals • Check 10A fuse Sound is distorted • If “Maximum Output” is lit, turn down volume • If using wireless mic, is red ‘Audio Peak’ lit? If so, signal (such as voice) is too strong. Move microphone farther away from source. • Turn down i
ページ7に含まれる内容の要旨
Wired Mic and CD/Tape audio cuts in and • Reduce signal input if “Maximum Specifications: out Output” flickers Rated Power Output: 100 Watts peak/ 50 Watts per channel Max SPL : 116 dB voice mode, 114 dB music mode Frequency Response: 35 Hz – 20 kHz (voice mode + 4 dB from 2-12 kHz) Bass/Treble Controls: 10 dB cut/boost @ 100 Hz, 8 kHz Unbalanced Input: Hi-Z, Neutrik combo 1/ 4” phone or 3.5mm jack (Line Level) Unit makes buzzing noise • Check
ページ8に含まれる内容の要旨
NOTES: AmpliVox Sounds Systems LLC 3149 Mac Arthur Blvd. Northbrook, IL 60062 1-800-267-5486 15 16
