ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
Note It may cause damage to the SD/MMC/MS card/USB device and the unit when any memory card or USB device is inserted or removed without turning off the unit. Safety precaution 1) Use only the supplied adaptor with Input 100-240V, Output 5V. 2) Turn off power before cleaning. Use only a soft cloth to clean the unit Do not use liquid cleaners. 3) Avoid exposing the unit to extreme heat. 4) Do not disassemble the Digital Photo Frame, otherwise it may result in electric shock and voi
ページ3に含まれる内容の要旨
Content Note .............................................................................1 Safety precaution.......................................................1 Content........................................................................2 Introduction ................................................................3 1 、Features..........................................................3 2 、Packaging Check List .....................................4 3 、Specifications..............
ページ4に含まれる内容の要旨
Introduction Your new Digital Photo Frame lets you view digital pictures from memory cards easily and quickly. No computer or printer is needed Includes convenient slide show mode, which starts automatically when the Frame is turned on. Supports many popular memory card types. Easy to take with you to share photos with family and friends anywhere. A step beyond the traditional photo frame. View tens or even hundreds of digital photos without the need to pay for printing. 1 、Featu
ページ5に含まれる内容の要旨
2 、Packaging Check List Digital Photo Frame Quick Start Guide User Manual AC Adaptor 3 、Specifications Panel Size 7 inches Resolution 480X234 Brightness 200 CD/M² Contrast 300 View Angle (U/D/L/R) (CR ≥10) 40/60/60/60 Response Time 15ms Ton Screen Size Mode 16:9 File Format Type JPEG Max.Photo Size 10 mega pixels Power Requirement 5V DC Power Consumption <10 W Operating Temperature 14~158 ℉ (-10~70 ℃) Storage Temperature -4~176 ℉(-20~80 ℃) 4
ページ6に含まれる内容の要旨
Product Diagram A. Top View 1. Button among Pan Scan, Fill, Original Pause or resume the playback. and Auto Fit. 2. Button Change the aspect ratio Go to the previous picture. between 16:9 and 4:3. (Press 3. Button and hold for a moment). Go to the next picture. 6. P-SAVE Button 4. Rotate Button Enter the power save mode. Rotate the current picture. Then press it again to exit the 5. MODE Button power save mode. Change the display mode B. Front View 1. LCD Screen 5
ページ7に含まれる内容の要旨
C. Rear View 1. Stand Support the Digital Photo Frame. D. Side View 1. SD/MS/MMC Card Port Insert SD/MS/MMC card into this port. Or pull out the SD/MMC/MS card from the port. 2. USB Port Connect USB device, such as USB flash disk. 3. DC 5V IN Connect the supplied adaptor. 6
ページ8に含まれる内容の要旨
Using Your Digital Photo Frame Install the stand for tabletop display. Connect the AC adaptor. Insert a memory card in the Digital Photo Frame (with the card’s electrical contacts towards the front of the unit.). A slide show will begin automatically. To enter the power save, press the P-SAVE button. Press the button, the word Pause will appear on the screen briefly and the slide show will be stopped. The current photo will remain on the screen until the button is pressed again, at
ページ9に含まれる内容の要旨
Technical Notes 1. Your Digital Photo Frame is a sophisticated electronic device. Do not drop or subject the unit to jarring or strong vibrations. 2. Avoid placing the Digital Photo Frame in areas of high humidity or where it might be subjected to splashing. 3. The panel is made of plastic and can be easily damaged. Avoid sharp objects. 4. Use only a soft dry cloth to clean the screen. Question/Troubleshooting Guide This chapter presents some troubleshooting problems you may encounte
ページ10に含まれる内容の要旨
3.Question: Why is the memory card not recognized? Answer: The memory card might be inserted rearwards or is not pushed in far enough. After inserting the memory card in the right direction, if the card still cannot be read, please turn off the unit and then power it again. 9
ページ11に含まれる内容の要旨
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferen
ページ12に含まれる内容の要旨
Nextar™ a trademark of Nextar (Hong Kong) Limited Nextar may find it necessary to modify, amend or otherwise change or update this manual. We may reserve the right to do this at any time, without any prior notice. All specifications and features are subject to change without notice. © NEXTAR, INC. AND ITS AFFILIATES 1661 FAIRPLEX DRIVE LA VERNE, CA 91750. USA All products distributed by Nextar, Inc. Unless otherwise indicated www.nextar.com Made in Chin
